带热障涂层高温合金材料飞秒激光制孔工艺试验研究
Experimental research on femtosecond laser hole making process of superalloy material with thermal barrier
查看参考文献11篇
|
文摘
|
随着带热障涂层高温合金的广泛应用,对飞秒激光制孔的工艺也提出了更高的挑战,本文通过研究飞秒激光与氧化锆陶瓷的相互作用原理,计算出了当单脉冲能量约为80 µJ时,焦点内的材料可以被完全去除,并通过实验进行了验证。通过大量的优化实验,提出了针对带涂层高温合金的分段制孔法,总结出了最优的工艺参数,可用于任意角度制孔,所获得的微孔涂层表面质量完好,过渡段无裂纹,孔壁质量良好。 |
|
其他语种文摘
|
With the wide application of superalloys with thermal barrier coatings,the process of femtosecond laser hole making has also faced higher challenges. In this paper, by studying the interaction principle of femtosecond laser and zirconia ceramics,the current when the energy of a single pulse is about 80 µJ,the material in the focal point can be completely removed,which is verified by experiments. Through a large number of optimization experiments,a segmented hole making method for coated superalloys is proposed, and the optimal process parameters are summarized, which can be used to make holes at any angle. The surface quality of the obtained microporous coating is intact and the transition section cracks and has no hole wall quality is good. |
|
来源
|
激光与红外
,2021,51(9):1155-1159 【扩展库】
|
|
DOI
|
10.3969/j.issn.1001-5078.2021.09.007
|
|
关键词
|
热障涂层
;
飞秒激光
;
微孔加工
|
|
地址
|
1.
中国航发西安航空发动机有限公司, 陕西, 西安, 710100
2.
中国科学院西安光学精密机械研究所, 陕西, 西安, 710119
3.
西安中科微精光子制造科技有限公司, 陕西, 西安, 710119
4.
西安工业大学机电工程学院, 陕西, 西安, 710021
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1001-5078 |
|
学科
|
电子技术、通信技术 |
|
文献收藏号
|
CSCD:7051901
|
参考文献 共
11
共1页
|
|
1.
张强. 飞秒激光带热障涂层叶片气膜孔加工技术研究进展.
航空科学技术,2018,29(2):9-14
|
CSCD被引
8
次
|
|
|
|
|
2.
周明. 航空涡轮叶片气膜冷却孔激光加工技术进展.
中国基础科学,2016,18(5):35-42
|
CSCD被引
7
次
|
|
|
|
|
3.
夏博. 飞秒激光微孔加工.
中国激光,2013,40(2):6-17
|
CSCD被引
4
次
|
|
|
|
|
4.
Tien A C. Short-pulse laser damage in transparent materials as a function of pulse duration.
Physical Review Letters,1999,82(19):3883-3886
|
CSCD被引
36
次
|
|
|
|
|
5.
Cai Y. Propagation of hollow gaussian beams through apertured paraxial optical systems.
Journal of the Optical Society of America A Optics Image Science & Vision,2006,23(6):1410-1418
|
CSCD被引
3
次
|
|
|
|
|
6.
Ho S. Single and multi-scan femtosecond laser writing for selective chemical etching of cross section patternable glass micro-channels.
Applied Physics A: Materials Science & Processing,2012,106(1):5-13
|
CSCD被引
4
次
|
|
|
|
|
7.
Bloembergen N. A brief history of light breakdown.
Journal of Nonlinear Optical Physics & Materials,1997,6(4):377-385
|
CSCD被引
6
次
|
|
|
|
|
8.
Bloembergen N. Laser-induced electric breakdown in sol-ids.
IEEE Journal of Quantum Electronics,1974,10(3):375-386
|
CSCD被引
46
次
|
|
|
|
|
9.
Thornber K K. Applications of scaling to problems in high-field electronic transport.
Journal of Applied Physics,1981,52(1):279-290
|
CSCD被引
18
次
|
|
|
|
|
10.
Joglekar A P. A study of the deterministic character of optical damage by femtosecond laser pulses and applications to nanomachining.
Applied Physics B,2003,77(1):25-30
|
CSCD被引
8
次
|
|
|
|
|
11.
Paterson C. Excimer laser ablation of microstructures: a numerical model.
J Appl Phys,1999,86(11):6538-6546
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问