梳状大模场光纤结构的优化设计
Optimum design for comb-index core fiber with large mode area
查看参考文献14篇
|
文摘
|
通过在周期性梳状折射率结构的最外层增加一个高折射率平台的方法,对梳状折射率分布大模场光纤的波导结构进行了优化,使其在模场面积、模场分布及抗弯曲性能方面都有明显提升。模拟研究结果表明,与已有单一梳状折射率分布的光纤相比,优化后的大模场光纤的模场面积提高了700 μm~2以上,且在相同弯曲半径下,基模弯曲损耗由6 dB/m降低为0.1 dB/m。此外,通过对最外层高折射率平台的参数进行调制可实现不同的模场分布,包括高斯分布、平坦化分布和环状分布,满足特殊激光加工工业的应用需求。 |
|
其他语种文摘
|
The wave -guide structure of the large mode area fiber with a comb -index core was optimized by adding a high refractive index platform in the outer layer of the fiber core, which provided a performance promotion on the parameters of mode field area, mode field distribution and bending resistance. The simulation results show that the optimized refractive index distribution increases the fiber′s mode field area by more than 700 μm~2, and reduces bending loss of the fundamental mode from 6 dB/m to 0.1 dB/m at the same bending radius compared with the original comb-index distribution. Moreover, the mode field distributions including Gauss -like distribution, flattened distribution and hollow distribution, can be obtained by simply modulating the refractive-index parameters of the outermost platform, which may meet the needs of special laser processing industry. |
|
来源
|
红外与激光工程
,2019,48(9):0918005 【核心库】
|
|
DOI
|
10.3788/IRLA201948.0918005
|
|
关键词
|
光纤光学
;
大模场光纤
;
模场调制
;
弯曲损耗
;
激光加工
|
|
地址
|
1.
中国科学院西安光学精密机械研究所, 瞬态光学与光子技术国家重点实验室, 陕西, 西安, 710119
2.
中国科学院大学, 北京, 100049
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1007-2276 |
|
学科
|
物理学 |
|
基金
|
国家973计划
|
|
文献收藏号
|
CSCD:6583895
|
参考文献 共
14
共1页
|
|
1.
Keck D B. On the ultimate lower limit of attenuation in glass optical waveguides.
Applied Physics Letters,1973,22(7):307-309
|
CSCD被引
4
次
|
|
|
|
|
2.
Maurer R D. Glass fibers for optical communication.
Proceedings of the IEEE,1973,61(4):452-462
|
CSCD被引
1
次
|
|
|
|
|
3.
Maurer R.
Optical waveguide light source: US, 3808549,1974
|
CSCD被引
1
次
|
|
|
|
|
4.
Jauregui C. High-power fibre lasers.
Nature Photonics,2013,7(11):861-867
|
CSCD被引
147
次
|
|
|
|
|
5.
Dauson J W. Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power.
Opt Exp,2008,16(17):13240-13266
|
CSCD被引
153
次
|
|
|
|
|
6.
Limpert J. Low-nonlinearity single-transverse-mode ytterbium doped photonic crystal fiber amplifier.
Opt Exp,2004,12(7):1313-1319
|
CSCD被引
24
次
|
|
|
|
|
7.
Kashiwagi M. Effectively single-mode all-solid photonic bandgap fiber with large effective area and low bending loss for compact high-power all-fiber lasers.
Opt Exp,2012,20(14):15061-15070
|
CSCD被引
11
次
|
|
|
|
|
8.
Wu Xiaoxiao. Study on the temperature tuning ultra-high negative dispersion photonic crystal fiber.
Acta Photonica Sinica,2018,47(5):1-7
|
CSCD被引
1
次
|
|
|
|
|
9.
Jin Liang. Optimization of large-mode-area active fiber.
Infrared and Laser Engineering. (in Chinese),2014,43(9):1-6
|
CSCD被引
1
次
|
|
|
|
|
10.
Bai Xiuli. Circular photonic crystal fiber supporting orbital angular momentum modes transmission.
Infrared and Laser Engineering. (in Chinese),2019,48(2):0222002
|
CSCD被引
3
次
|
|
|
|
|
11.
Dong Fanlong. Optimization of beam quality for all-fiber lasers.
Opt Precision Eng. (in Chinese),2014,22(4):1-6
|
CSCD被引
1
次
|
|
|
|
|
12.
Ke Weiwei. Fiber with comb-index core designed for high-power fiber lasers.
IEEE Journal of Quantum Electronics,2015,51(10):1-8
|
CSCD被引
1
次
|
|
|
|
|
13.
Wang Xin. Rectangle lattice large mode area photonic crystal fiber for 2 μm compact high-power fiber lasers.
IEEE Journal of Selected Topics in Quantum Electronics,2014,20(5):1-6
|
CSCD被引
1
次
|
|
|
|
|
14.
Xing Wenxin. Mid-infrared hollow-core Bragg fiber for trace gas detection.
Acta Physica Sinica. (in Chinese),2010,59(12):8640-8654
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问