Coaxial Twin-shaft Magnetic Fluid Seals Applied in Vacuum Wafer-Handling Robot
查看参考文献17篇
|
文摘
|
Compared with traditional mechanical seals,magnetic fluid seals have unique characters of high airtightness,minimal friction torque requirements,pollution-free and long life-span,widely used in vacuum robots.With the rapid development of Integrate Circuit(IC),there is a stringent requirement for sealing wafer-handling robots when working in a vacuum environment.The parameters of magnetic fluid seals structure is very important in the vacuum robot design.This paper gives a magnetic fluid seal device for the robot.Firstly,the seal differential pressure formulas of magnetic fluid seal are deduced according to the theory of ferrohydrodynamics,which indicate that the magnetic field gradient in the sealing gap determines the seal capacity of magnetic fluid seal.Secondly,the magnetic analysis model of twin-shaft magnetic fluid seals structure is established.By analyzing the magnetic field distribution of dual magnetic fluid seal,the optimal value ranges of important parameters,including parameters of the permanent magnetic ring,the magnetic pole tooth,the outer shaft,the outer shaft sleeve and the axial relative position of two permanent magnetic rings,which affect the seal differential pressure,are obtained.A wafer-handling robot equipped with coaxial twin-shaft magnetic fluid rotary seals and bellows seal is devised and an optimized twin-shaft magnetic fluid seals experimental platform is built.Test result shows that when the speed of the two rotational shafts ranges from 0-500 r/min,the maximum burst pressure is about 0.24 MPa.Magnetic fluid rotary seals can provide satisfactory performance in the application of wafer-handling robot.The proposed coaxial twin-shaft magnetic fluid rotary seal provides the instruction to design high-speed vacuum robot. |
|
来源
|
Chinese Journal of Mechanical Engineering
,2012,25(4):706-714 【核心库】
|
|
DOI
|
10.3901/cjme.2012.04.706
|
|
关键词
|
magnetic fluid
;
seals
;
coaxial twin-shaft
;
magnetic field
;
wafer handling robot
|
|
地址
|
1.
School of Mechanical Engineering,Dalian University of Technology, Dalian, 116023
2.
Sany Heavy Equipment Co.,Ltd, Shenyang, 110141
|
|
语种
|
英文 |
|
ISSN
|
1000-9345 |
|
学科
|
自动化技术、计算机技术 |
|
基金
|
国家自然科学基金
|
|
文献收藏号
|
CSCD:4584394
|
参考文献 共
17
共1页
|
|
1.
Wu J. Design and analysis of vacuum robot for cluster tools.
1st International Conference on Intelligent Robotics and Applications,2008:286-293
|
CSCD被引
1
次
|
|
|
|
|
2.
Lee T E. A review of scheduling theory and methods for semiconductor manufacturing cluster tools.
Proceedings of the 40th Conference on Winter Simulation,2008:2127-2135
|
CSCD被引
3
次
|
|
|
|
|
3.
Takashi K. Vacuum manipulator for semiconductor manufacturing equipment.
Industrial Robot,2002,29(4):324-328
|
CSCD被引
4
次
|
|
|
|
|
4.
Wlodzimierz O. New designs of magnetic fluid exclusion seals for rolling bearings.
Industrial Lubrication and Tribology,2005,57(3):107-115
|
CSCD被引
2
次
|
|
|
|
|
5.
Zarina B. New low cost ferrofluidic sealing challenges the mechanical seal.
Industrial Lubrication and Tribology,1997,49(6):288-290
|
CSCD被引
1
次
|
|
|
|
|
6.
Bras J C M.
Sealing and friction bearing unit containing a magnetic fluid: US, US5100159,1992
|
CSCD被引
1
次
|
|
|
|
|
7.
Ozaki K. Experimental study of high-speed single stage magnetic fluid seals.
Journal of Magnetism and Magnetic Materials,1986,65(2/3):382-384
|
CSCD被引
1
次
|
|
|
|
|
8.
Jim B. Experimental Study of High speed sealing capability of single stage ferrofluidic Seals.
Jounral of Tribology,1997,119(3):416-421
|
CSCD被引
1
次
|
|
|
|
|
9.
Cong M. An automated wafer-handling system based on the integrated circuit equipments.
IEEE International Conference on Robotics and Biomimetics,2005:240-245
|
CSCD被引
6
次
|
|
|
|
|
10.
Yoshio K. Wafer-handling interface under processing ambient conditions for a single-wafer cluster tool.
IEEE Transactions on Semiconductor Manufacturing,1996:13-19
|
CSCD被引
1
次
|
|
|
|
|
11.
Horiguchi T.
Substrate transporting mechanism, substrate transporting method and substrate processing system: US, 2007/0296134 A1,2007
|
CSCD被引
1
次
|
|
|
|
|
12.
Szydlo Z. Experiments on magnetic fluid rotary seals operating under vacuum conditions.
TriboTest,2005,11(4):345-354
|
CSCD被引
3
次
|
|
|
|
|
13.
Mitamura Y. Application of a magnetic fluid seal to rotary blood pumps.
Journal of Physics Condensed Matter,2008,20(20):204-208
|
CSCD被引
11
次
|
|
|
|
|
14.
Raj K. Advances in ferrofluid technology.
Journal of Magnetism and Magnetic Materials,1995,149(1/2):174-180
|
CSCD被引
29
次
|
|
|
|
|
15.
Rosensweig R E.
Ferrohydrodynamics,1985
|
CSCD被引
58
次
|
|
|
|
|
16.
Yasunaqa M. Meniscus shape and splashing of magnetic fluid in a magnetic fluid seal.
Journal of Tribology,1999,121(2):377-383
|
CSCD被引
1
次
|
|
|
|
|
17.
Cong M. A study on wafer-handling robot with coaxial twin-shaft magnetic fluid seals.
2nd International Conference on Intelligent Robotics and Applications, ICIRA 2009,2009:1123-1137
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问