三轴围压下砂浆弹塑性损伤变形过程的细观力学分析
MICROMECHANICAL ANALYSIS OF MORTAR IN ELASTO-PLASTIC DAMAGE DEFORMATION PROCESS UNDER TRIAXIAL HYDROSTATIC COMPRESSION
查看参考文献18篇
|
文摘
|
基于对泛函势和Cauchy-Born准则，抽象出弹簧束构元和体积构元，组集两种构元的力学响应，给出了材料的弹性损伤本构关系; 考虑滑移作为主要的塑性变形机制，提出了滑移构元，给出了材料的塑性本构关系;利用变形分解机制，得到了由三种构元共同描述的弹塑性损伤本构关系。阐述了在给定应变条件下弹塑性损伤本构关系的计算迭代流程。利用单轴拉伸算例详细阐述了模型参数的标定过程。对有围压作用下砂浆材料的压缩行为进行了模拟，从材料细观变形角度解释了随着围压增加，材料承载能力增加的现象。模型预测结果与试验结果符合较好，初步验证了模型具有处理非比例加载问题的能力。 |
|
其他语种文摘
|
Based on pair functional potentials and Cauchy-Born rule, spring-buddle components and cubage component were abstracted. Integrating the mechanical responses of the two kinds of components, the paper derived the corresponding elasto-damage constitutive relation. Recognizing that the slip is the main plastic deformation mechanism, the paper proposed slip components to describe the plastic deformation, and then derived the corresponding plastic constitutive relation. Based on the decomposition of deformations, the elasto-plastic damage constitutive relation described by three kinds of components was derived. The numerical iteration algorithm under given strain was presented. The calibration of model parameters was illustrated through a tensile numerical case. Simulation of mortar under hydrostatic compression was performed. It is explained from the point of the mesoscopic deformation that the bearing capacity increases as the hydrostatic pressure increases. The numerical results agree well with experimental data, which demonstrates that this model has the capability to deal with nonproportional loading preliminarily. |
|
来源
|
工程力学
,2011,28(10):158-164,196 【核心库】
|
|
关键词
|
弹塑性损伤本构关系
;
三轴围压
;
构元组集模型
;
非比例加载
;
砂浆
|
|
地址
|
1.
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100190
2.
中国科学院力学研究所, 中国科学院非线性力学国家重点实验室, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-4750 |
|
学科
|
力学 |
|
基金
|
国家自然科学基金项目
|
|
文献收藏号
|
CSCD:4320144
|
参考文献 共
18
共1页
|
|
1.
薛志刚. 水泥砂浆在围压下的动态力学性能.
工程力学,2008,25(12):184-188,201
|
CSCD被引
14
次
|
|
|
|
|
2.
Litewka A. Damage, plasticity and failure of ceramics and cementitious composites subjected to multi-axial state of stress.
International Journal of Plasticity,2006,22(11):2048-2065
|
CSCD被引
1
次
|
|
|
|
|
3.
Papanikolaou V K. Confinement-sensitive plasticity constitutive model for concrete in triaxial compression.
International Journal of Solids and Structures,2007,44(21):7021-7048
|
CSCD被引
11
次
|
|
|
|
|
4.
杨圣奇. 大理岩三轴压缩变形破坏与能量特征研究.
工程力学,2007,24(1):136-142
|
CSCD被引
78
次
|
|
|
|
|
5.
闫东明. 三向应力状态下混凝土动态强度和变形特性研究.
工程力学,2007,24(3):58-64
|
CSCD被引
23
次
|
|
|
|
|
6.
沈新普. 混凝土损伤塑性本构模型研究.
岩土力学,2004,25(增刊2):13-16
|
CSCD被引
4
次
|
|
|
|
|
7.
Wert J A. Revealing deformation microstructures.
Materials Today,2007,10(9):24-32
|
CSCD被引
2
次
|
|
|
|
|
8.
Pensee V. Micromechanics of anisotropic brittle damage: comparative analysis between a stress based and a strain based formulation.
Mechanics of Materials,2003,35(8):747-761
|
CSCD被引
3
次
|
|
|
|
|
9.
Gao H. Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds.
Journal of the Mechanics and Physics of Solids,1998,46(2):187-218
|
CSCD被引
10
次
|
|
|
|
|
10.
Miller R. Quasicontinuum models of fracture and plasticity.
Engineering Fracture Mechanics,1998,61(3/4):427-444
|
CSCD被引
17
次
|
|
|
|
|
11.
Deng S C. Component assembling model and its application to quasi-brittle damage.
Theoretical and Applied Fracture Mechanics,2006,46(3):232-242
|
CSCD被引
4
次
|
|
|
|
|
12.
Deng S C. Validation of component assembly model and extension to plasticity.
Theoretical and Applied Fracture Mechanics,2007,47(3):244-259
|
CSCD被引
7
次
|
|
|
|
|
13.
Zhang J. Study of the damage-induced anisotropy of quasi-brittle materials using the component assembling model.
International Journal of Damage Mechanics,2008(17):197-221
|
CSCD被引
1
次
|
|
|
|
|
14.
邓守春.
构元组集模型及其对材料弹、塑性损伤变形过程的描述,2007
|
CSCD被引
2
次
|
|
|
|
|
15.
Crystals Phillips R.
defects and microstructuresmodeling across scales,2001
|
CSCD被引
1
次
|
|
|
|
|
16.
Ericksen J L.
The cauchy and born hypotheses for crystals, in Phase transformations and material instabilities in solids,1984
|
CSCD被引
1
次
|
|
|
|
|
17.
Lemaitre J. A continuous damage mechanics model for ductile fracture.
Journal of Engineering Materials and Technology,1985,107(1):83-89
|
CSCD被引
238
次
|
|
|
|
|
18.
Litewka A. Load-induced oriented damage and anisotropy of rock-like materials.
International Journal of Plasticity,2003,19(12):2171-2191
|
CSCD被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问