Friction Estimation and Roll Force Prediction during Hot Strip Rolling
查看参考文献20篇
|
文摘
|
A mathematical model of friction coefficient was proposed for the roll force calculation of hot-rolled strips. The online numerical solving method of the roll force calculation formula based on the proposed friction model was developed and illustrated by the practical calculation case. Then, the friction coefficient during hot strip rolling was estimated from the measured roll force by force model inversion. And then, the expression of friction model was proposed by analyzing the calculation process of stress state coefficient, and the model parameters were determined by the shared parameter multi-model nonlinear optimization method. Finally, the industrial experiments demonstrated the feasibility and effectiveness of the related models. The accuracy of the new roll force model based on the built friction model was much higher than that of the traditional Sims model, and it could be applied in the online hot rolling process control. |
|
来源
|
Journal of Iron and Steel Research
, International,2016,23(12):1268-1276 【核心库】
|
|
DOI
|
10.1016/s1006-706x(16)30187-x
|
|
关键词
|
hot rolling
;
roll force
;
friction coefficient
;
soft measurement
;
multi-objective optimization
|
|
地址
|
1.
College of Information Science and Engineering, Wuhan University of Science and Technology, Hubei, Wuhan, 430081
2.
Research Institute of Science and Technology, Northeastern University, Liaoning, Shenyang, 110819
|
|
语种
|
英文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1006-706X |
|
学科
|
金属学与金属工艺 |
|
基金
|
Sponsored by Science and Technology Research Program of Hubei Ministry of Education of China
;
Youth Science and Technology Program of Wuhan of China
|
|
文献收藏号
|
CSCD:5876857
|
参考文献 共
20
共1页
|
|
1.
Mahdi B.
Appl. Math. Model,2013,37:4593-4607
|
CSCD被引
1
次
|
|
|
|
|
2.
Liu X H.
Calculation Model of Rolling Parameters and Its Application,2007
|
CSCD被引
1
次
|
|
|
|
|
3.
Li W G.
J. Northeast. Univ,2011,32:622-625
|
CSCD被引
2
次
|
|
|
|
|
4.
Sims R B.
Proc. Inst. Mech. Eng,1954,168:191-200
|
CSCD被引
13
次
|
|
|
|
|
5.
Li Y H.
Proceedings International Conference on Steel Rolling, Association Technique de la Siderurgie Francaise,2006
|
CSCD被引
1
次
|
|
|
|
|
6.
Chen S X.
Int. J. Mech. Sci,2014,89:256-263
|
CSCD被引
6
次
|
|
|
|
|
7.
Randall A.
Proceedings, Aistech-conference, Association for Iron and Steel Technology,2005:785
|
CSCD被引
1
次
|
|
|
|
|
8.
Tan X C.
J. Mater. Process. Technol,2008,207:222-234
|
CSCD被引
10
次
|
|
|
|
|
9.
Azushima A.
J. Mater. Process. Technol,2010,210:110-115
|
CSCD被引
3
次
|
|
|
|
|
10.
Legrand N.
Wear,2012,286/287:8-18
|
CSCD被引
1
次
|
|
|
|
|
11.
Du F S.
J. Iron Steel Res. Int,2010,17(7):19-23
|
CSCD被引
3
次
|
|
|
|
|
12.
Freshwater I J.
Int. J. Mech. Sci,1996,38:633-648
|
CSCD被引
6
次
|
|
|
|
|
13.
Cheng X W.
Tribol. Int,2015,84:61-70
|
CSCD被引
4
次
|
|
|
|
|
14.
Tieu A K.
Wear,2011,273:43-48
|
CSCD被引
1
次
|
|
|
|
|
15.
Nilsson M.
Wear,2013,307:209-217
|
CSCD被引
3
次
|
|
|
|
|
16.
Jiang Z Y.
Tribol. Int,2010,43:1339-1345
|
CSCD被引
6
次
|
|
|
|
|
17.
Brent R P.
Engle-wood Cliffs,1973
|
CSCD被引
1
次
|
|
|
|
|
18.
Zhang Z.
Int. J. Exp. Algorithms,2011,2:21-26
|
CSCD被引
1
次
|
|
|
|
|
19.
Lv C.
Research on Iron and Steel,2010,114(3):32-33
|
CSCD被引
1
次
|
|
|
|
|
20.
Zheng G.
Proceedings of International Conference on Intelligent Robotics and Applications,2012:66-75
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问