帮助 关于我们

返回检索结果

航空航天轻质高温结构材料的焊接技术研究进展
Research Advances on the Welding and Joining Technologies of Light-mass High-temperature Structural Materials in Aerospace Field

查看参考文献101篇

熊华平 1   毛建英 2   陈冰清 1   王群 2   吴世彪 1   李晓红 3  
文摘 Ti-Al系金属间化合物、陶瓷和陶瓷基复合材料这两大类轻质高温结构材料在航空、航天领域具有很好的应用前景,本文在分析大量文献的基础上,评述了国内外焊接技术主要研究进展,包括材料的可焊性研究进展、不同焊接方法和不同材料组合焊接接头对应的性能以及焊接技术应用研究进展,指出耐高温焊接材料的研制、两大类轻质高温结构材料与异种材料组合的连接技术以及实际焊接接头的考核应用研究应该是今后本领域的重点研究方向.
其他语种文摘 Ti-Al system intermetallics and high-temperature ceramics or ceramic matrix composites, are the two kinds of light-mass heat-resistance structural materials with high potential in aerospace applications. According to the published literatures, the research advances on their welding and joining technologies, including the material weldabilities, joint properties with different welding processes and material combinations, and the progresses of studies on the application of the welding and joining technologies were reviewed, and some comments are made on the reporting advances especially in the past two decades. It is pointed out that, development of new high-temperature-tolerance welding consumables or brazing alloys, joining of dissimilar materials, and study on joint assessment and engineering application would be mainly important research areas in future.
来源 材料工程 ,2013(10):1-12 【核心库】
DOI 10.3969/j.issn.1001-4381.2013.10.001
关键词 金属间化合物 ; 陶瓷基复合材料 ; 焊接 ; 强度 ; 界面
地址

1. 北京航空材料研究院焊接及锻压工艺研究室, 北京, 100095  

2. 航天材料及工艺研究所特种焊接工艺技术中心, 北京, 100076  

3. 中国航空研究院, 北京, 100012

语种 中文
文献类型 综述型
ISSN 1001-4381
学科 海洋学
基金 国家自然科学基金资助项目 ;  国家航空基金
文献收藏号 CSCD:4967302

参考文献 共 101 共6页

1.  David S A. Weldabili-ty and microstructure of a titanium aluminide. Welding Journal,1990,69(4):133-140 CSCD被引 11    
2.  Baeslack Ⅲ W A. Effect of cooling rate on the structure and hardness of a Ti-26Al-10Nb-3V-1Mo titanium aluminide. Scripta Metallurgica at Materialia,1990,24(2):319-324 CSCD被引 2    
3.  Threadgill P L. The prospects for joining titanium alumin-ides. Materials Science and Engineering:A,1995,192/193(2):640-646 CSCD被引 22    
4.  Martin G S. An evaluation of CO_2 laser beam welding on a Ti_3Al-Nb alloy. Welding Journal,1995,74(2):77-82 CSCD被引 7    
5.  Wu A P. Microstructures and mechanical properties of Ti-24Al-17Nb (at. %) laser beam welding joints. Intermetallics,2002,10(7):647-652 CSCD被引 19    
6.  Acoff V L. Effect of heat treatment on microstructure and microhardness of spot welds in Ti-26Al-11Nb. Materials Science and Engineering:A,1992,152(1/2):304-309 CSCD被引 2    
7.  刘博. Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能. 材料科学与工艺,1997,5(1):45-49 CSCD被引 8    
8.  刘卫红. 热工艺对Ti_3Al基合金力学性能和焊接性影响. 航空材料学报,2008,28(3):62-65 CSCD被引 1    
9.  Wang G Q. Effect of post-weld heat treatment on microstructure and properties of Ti-23Al-17Nb alloy laser beam welding joints. Transactions of Nonferrous Metals Society of China,2010,20(5):732-739 CSCD被引 5    
10.  刘卫红. Ti-24Al-15Nb-1Mo合金氩弧焊. 航空材料学报,2006,26(3):111-115 CSCD被引 4    
11.  Tan L J. Microstructure and properties of electron beam welded joint of Ti-22Al-25Nb/TC11. Aerospace Science and Technology,2010,14(5):302-306 CSCD被引 19    
12.  Cadden C H. Microstruc-tural evolution and mechanical properties of brazed joints in Ti-13.4A1-21. 2Nb. Welding Journal, Welding Research Sup-plement,1997,8(2):316-325 CSCD被引 1    
13.  陈波. AgCu基钎料钎焊Ti_3Al基合金的接头组织与性能. 焊接,2010(10):29-32 CSCD被引 3    
14.  He P. Microstructure and strength of brazed joints of Ti_3Al-based alloy with NiCrSiB. Materials Characterization,2004,52(4/5):309-318 CSCD被引 13    
15.  熊华平. Ti-Al基合金的扩散焊研究. 材料科学与工艺,2009,17(1):16-20 CSCD被引 1    
16.  Theadgill P L. Metallurgical aspects of joining titanium alu-minide-alloys. Proc Int Symp on Intermetallic Compounds (JIMIS-6)JIM,1991(10):1021-1025 CSCD被引 1    
17.  Mallory L. Evolution of the weld heat-affected zone microstructure in a Ti-48Al-2Cr-2Nb gamma titanium aluminide. Journal of Materials Science Letters,1994,13(14):1061-1065 CSCD被引 2    
18.  Arenas M F. Analysis of gamma titanium alu-minide welds produced by gas tungsten arc welding. Welding Journal,2003,82(5):110-115 CSCD被引 5    
19.  Hirose A. Microstructure and crack sensitivity of laser-fusion zones of Ti-46mol-percent Al-2mol-percent Mo alloy. Journal of Materials Science,1995,30(4):970-979 CSCD被引 3    
20.  Threadgill P L. Joining of intermetallic alloys-further studies. The TWI Journal,1997,6(2):257-316 CSCD被引 3    
引证文献 17

1 陈冰清 NiCuNbCr焊料Ti_3Al/GH4169合金氩弧焊接头的组织及性能 材料工程,2014(4):13-17,25
CSCD被引 1

2 吴世彪 采用Ag-Cu-Ti钎料真空钎焊SiO_(2f) /SiO_2复合陶瓷与C/C复合材料 材料工程,2014(10):16-20
CSCD被引 2

显示所有17篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号