基于Johnson-Cook本构模型的高强度装甲钢动态力学性能参数标定及验证
Calibration and Verification of Dynamic Mechanical Properties of High-strength Armored Steel Based on Johnson-Cook Constitutive Model
查看参考文献30篇
|
文摘
|
具有高屈服强度的某装甲钢广泛应用于我国装甲车辆。为准确模拟该装甲钢的动态力学行为,开展基于Johnson-Cook(J-C)本构模型的动态本构参数标定及验证。采用万能材料试验机对该装甲钢进行不同温度下的准静态拉伸试验,同时采用分离式霍普金森压杆开展不同应变率下的压缩性能测试。基于实验数据和J-C本构模型,拟合得到该装甲钢的本构参数。基于轻气炮开展泡沫铝弹丸冲击均质梁的实验研究,分别采用J-C本构模型和理想弹塑性模型进行有限元仿真计算,并将冲击实验与数值结果进行对比分析。结果表明:该装甲钢具有应变率强化效应,且温度软化效应显著;采用J-C本构模型仿真的均质梁峰值挠度与试验结果的相对误差为1.7%~6.1%,残余挠度相对误差为0.6%~7.6%。 |
|
其他语种文摘
|
A specific type of armored steel with high yield strength has been widely used in China to improve the protection performance of armored vehicles. To numerically simulate the dynamic properties of the material,the material's dynamic constitutive parameters based on the Johnson-Cook constitutive model are calibrated and verified through experiments. First,quasi-static mechanical properties of the armor steel are systematically measured using a universal material testing machine under temperatures ranging from room temperature to 550 ℃.The compression properties of the material are further measured at various strain rates using a separated Hopkinson pressure bar system. Second,based on the Johnson-Cook constitutive model,the measured dynamic properties of the armor steel are fitted to obtain the material's constitutive parameters. Finally,a monolithic beam made of the armor steel is impacted by a aluminum foam projectile launched from a light-gas gun,and the test results are compared with finite element simulation results obtained using the constitutive parameters and the ideal elastic-plastic constitutive model. The results show that the armor steel demonstrates strong strain rate strengthening effect and thermal softening effect. The relative error between the peak deflection values of the monolithic beam obtained from J-C constitutive model simulation and experimental study is 1.7%-6.1%,and that for residual deflection is 0.6%-7.6%. |
|
来源
|
兵工学报
,2022,43(8):1966-1976 【核心库】
|
|
DOI
|
10.12382/bgxb.2021.0409
|
|
关键词
|
高强度装甲钢
;
Johnson-Cook本构模型
;
动态力学性能
;
泡沫铝弹丸
;
冲击实验
|
|
地址
|
1.
南京航空航天大学, 机械结构力学及控制国家重点实验室, 江苏, 南京, 210016
2.
南京航空航天大学, 多功能轻量化材料与结构工业和信息化部重点实验室, 江苏, 南京, 210016
3.
内蒙古第一机械集团有限公司, 特种车辆及其传动系统智能制造国家重点实验室, 内蒙古, 包头, 014030
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-1093 |
|
学科
|
力学 |
|
基金
|
国家自然科学基金项目
|
|
文献收藏号
|
CSCD:7286243
|
参考文献 共
30
共2页
|
|
1.
Borvik T. A discrete particle approach to simulate the combined effect of blast and sand impact loading of steel plates.
Journal of the Mechanics and Physics of Solids,2011,59(5):940-958
|
CSCD被引
12
次
|
|
|
|
|
2.
Pickering E G. The response of quadrangular plates to buried charges.
International Journal of Impact Engineering,2012,49:103-114
|
CSCD被引
4
次
|
|
|
|
|
3.
Uth T. The effect of inclination and stand-off on the dynamic response of beams impacted by slugs of a granular material.
International Journal of Solids and Structures,2015,56/57:154-174
|
CSCD被引
4
次
|
|
|
|
|
4.
孙晓旺. 军用车辆底部爆炸冲击下载员下肢保护装置设计与优化.
兵工学报,2021,42(12):2555-2564
|
CSCD被引
5
次
|
|
|
|
|
5.
李明星. 爆炸载荷冲击下假人下肢的材料参数识别和修正方法.
兵工学报,2021,42(9):1895-1901
|
CSCD被引
1
次
|
|
|
|
|
6.
赵振宇. V形防护结构研究综述.
应用力学学报,2020,37(6):2527-2534
|
CSCD被引
4
次
|
|
|
|
|
7.
Trajkovski J. Blast response of Light Armoured Vehicles (LAVs) with flat and V-hull floor.
Thin-Walled Structures,2018,131:238-244
|
CSCD被引
4
次
|
|
|
|
|
8.
Kyner A. Momentum transfer during the impact of granular matter with inclined sliding surfaces.
Journal of the Mechanics and Physics of Solids,2017,106:283-312
|
CSCD被引
2
次
|
|
|
|
|
9.
程远胜. 冲击波和破片群联合作用下高强聚乙烯/泡沫铝夹芯复合结构毁伤响应特性.
兵工学报,2021,42(8):1753-1762
|
CSCD被引
6
次
|
|
|
|
|
10.
Jones N.
Structural Impact,1989
|
CSCD被引
60
次
|
|
|
|
|
11.
Johnson G R. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures.
Engineering Fracture Mechanics,1985,21(1):31-48
|
CSCD被引
620
次
|
|
|
|
|
12.
高玉龙. 高速列车用6008铝合金动态变形本构与损伤模型参数研究.
爆炸与冲击,2021,41(3):118-129
|
CSCD被引
5
次
|
|
|
|
|
13.
胡昌明. 45号钢的动态力学性能研究.
爆炸与冲击,2003,23(2):188-192
|
CSCD被引
66
次
|
|
|
|
|
14.
郭子涛. 基于J-C模型的Q235钢的动态本构关系.
爆炸与冲击,2018,38(4):804-810
|
CSCD被引
26
次
|
|
|
|
|
15.
Senthil K. Study of the constitutive behavior of 7075-T651 aluminum alloy.
International Journal of Impact Engineering,2017,108:171-190
|
CSCD被引
16
次
|
|
|
|
|
16.
Nahshon K. Dynamic shear rupture of steel plates.
Journal of Mechanics of Materials and Structures,2007,2:2049-2066
|
CSCD被引
5
次
|
|
|
|
|
17.
Dey S. The effect of target strength on the perforation of steel plates using three different projectile nose shapes.
International Journal of Impact Engineering,2004,30:1005-1038
|
CSCD被引
42
次
|
|
|
|
|
18.
Iqbal M A. An investigation of the constitutive behavior of Armox 500T steel and armor piercing incendiary projectile material.
International Journal of Impact Engineering,2016,96:146-164
|
CSCD被引
12
次
|
|
|
|
|
19.
Seo S. Constitutive equation for Ti-6Al-4V at high temperatures measured using the SHPB technique.
International Journal of Impact Engineering,2005,31(6):735-754
|
CSCD被引
29
次
|
|
|
|
|
20.
李明星. 基于神经网络的车辆抗冲击防护组件优化.
爆炸与冲击,2020,40(2):110-118
|
CSCD被引
4
次
|
|
|
|
|
了解气象卫星更多信息，请访问