|
|
急冷Ni-Cr-B合金箔带钎料的制备及其可焊性
Preparation of Rapidly Quenched Ni-Cr-B Alloy Ribbon and Its Weldability
查看参考文献8篇
|
文摘
|
采用液态急冷单辊法制备了急冷Ni-Cr-B中间合金箔带。利用DSC，XRD和SEM等方法对急冷Ni-Cr-B合金箔带的固液相线的温度，结构及成分分布进行了研究。利用液态金属表面张力仪测定了急冷Ni-Cr-B合金箔带在镍基高温合金上的润湿性。并采用此中间合金对镍基高温合金进行了瞬态液相连接（TLP Bonding），测定了连接后的试棒在1010℃／248MPa下的持久寿命。结果表明，制备的Ni-Cr-B合金箔带成分均匀，熔点适于TLP连接。液态钎料对镍基高温合金基体具有良好的润湿性。采用这种中间合金对镍基高温合金进行TLP连接后的接头持久性能接近于母材。 |
|
其他语种文摘
|
Rapidly quenched Ni-Cr-B alloy ribbon was prepared by the rapidly-quenched method using a single steel roll. By XRD,SEM and DSC methods, the microstructure, element distributions and temperature of solidus and liquidus of Ni-Cr-B alloy ribbon were studied respectively. The wettability of Ni-Cr-B alloy were investigated by use of surface ten-sion instrument. The TLP bonding was carried out using Ni-Cr-B ribbon and the stress rupture life of the bonded specimen at 1 010 °C/248 MPa were measured. The results show that the chemical compositions of Ni-Cr-B ribbon are homogeneous and its melting point is suitable to TLP bond-ing. The wettability of molten Ni-Cr-B alloy on Ni-based superalloy sub-strate is good. After TLP bonding,the stress rupture life at 1 010 cC/248 MPa almost reaches that of the superalloy substrate. |
|
来源
|
焊接学报
,2002,23(6):82-84 【核心库】
|
|
关键词
|
钎料
;
制备
;
急冷
;
Ni-Cr-B箔带
;
润湿性
;
性能
|
|
地址
|
中国科学院金属研究所, 沈阳, 110016
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0253-360X |
|
学科
|
金属学与金属工艺 |
|
文献收藏号
|
CSCD:1121704
|
参考文献 共
8
共1页
|
|
1.
Duvall D S.
Welding Journal,1974,53(4):203-215
|
CSCD被引
63
次
|
|
|
|
|
2.
Nishimoto K.
Welding in the world,1998,41(2):121-131
|
CSCD被引
8
次
|
|
|
|
|
3.
Yeh M S.
Welding Journal,1997,76(12):517s-521s
|
CSCD被引
1
次
|
|
|
|
|
4.
Tetsuro Toyoda.
J. Mater. Sci,1996,31:2461-2465
|
CSCD被引
4
次
|
|
|
|
|
5.
张启运.
钎焊手册,1999
|
CSCD被引
67
次
|
|
|
|
|
6.
邹僖.
钎焊,1995
|
CSCD被引
9
次
|
|
|
|
|
7.
冼爱平.
金属-陶瓷界面的润湿和结合机理,1991
|
CSCD被引
1
次
|
|
|
|
|
8.
张新平. 镍基非晶态及晶态钎料真空钎焊工艺性能的比较.
焊接学报,1996,17(4):205-211
|
CSCD被引
7
次
|
|
|
|
|
|
了解气象卫星更多信息，请访问