文摘
|
进行低空探测的机载激光雷达消光系数反演存在着标定点选取和标定值确定两大困难。Fernald迭代后向积分法能够在不利用其它辅助设备的情况下,找到进行低空探测机载激光雷达消光系数反演所需的标定点和标定值。利用Fernald迭代后向积分法和Palm et al.(2002)方法分别对青岛机载激光雷达实验数据进行处理,得到的两条消光系数廓线基本吻合。定量分析显示:利用Fernald迭代后向积分法进行机载激光雷达消光系数反演时,激光雷达比对消光系数反演结果影响很大; 标定点的消光系数值及迭代判据的取值对机载激光雷达消光系数反演的结果影响较小。Fernald迭代后向积分法为不用其它辅助设备进行低空探测的机载激光雷达消光系数反演提供了一种可行的范例。 |
其他语种文摘
|
It is difficult to determine gauge point and calibration value in extinction coefficient inversion of airborne lidar that detects in low altitude. Fernald iterative backward integration method can find gauge point and calibration value for extinction coefficient inversion without other auxiliary equipment when airborne lidar is used for low altitude detection. Airborne lidar data of Qingdao is disposed using Fernald iterative backward integration method and Palm et al.(2002), and two extinction coefficient profiles agree with each other well. Quantitive analysis reveals that lidar ratio influences extinction coefficient profile inversion results greatly. Extinction coefficient of gauge point and iterative criterion value influence little extinction coefficient profile inversion results. Fernald iterative backward integration method offers a method for extinction coefficient inversion of low altitude detection lidar without other accessorial equipment. |
来源
|
光学学报
,2008,28(10):1837-1843 【核心库】
|
DOI
|
10.3788/aos20082810.1837
|
关键词
|
应用光学
;
机载激光雷达
;
Fernald迭代后向积分法
;
衰减的后向散射系数
;
消光系数反演
|
地址
|
中国科学院安徽光学精密机械研究所, 大气光学重点实验室, 安徽, 合肥, 230031
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0253-2239 |
学科
|
电子技术、通信技术 |
基金
|
国家基础设施建设项目资助课题。
|
文献收藏号
|
CSCD:3433858
|