导流片型旋流场内油滴聚并影响因素研究
Investigation into influence factors of oil droplet coalescence in swirling flow field of vane-type hydrocyclone
查看参考文献13篇
|
文摘
|
导流片型旋流器具有体积小、重量轻和效率高等优点,适用于井下以及海上平台等空间有限的场所。该文通过实验和数值模拟研究了导流片型旋流场中流量、油水界面张力、油相含率、油相黏度及油相粒度等因素对于离散相油滴聚并的影响。研究结果表明:随着流量增加,油滴聚并效果先增加后下降,当流量介于14 m~3/h-16 m~3/h之间时,可以使油滴聚并达到最佳的效果;提高油相含率能够增加大油滴的比例,同时也增加了小油滴的数量,因此在进行油水分离时排出的水相中会残留较多的油相;提高入口油相粒度和降低油相黏度,可以促进油滴的聚并;增大油水界面张力可以减小油滴破碎的概率,提高油水分离效率。这些研究结果对于导流片型旋流器的设计能起到一定的指导作用。 |
|
其他语种文摘
|
The vane-type hydrocyclone has the advantages of small size,light weight and high efficiency so that it is suitable for the scene with limited space,such as underground and offshore platform.In this work,the effects of flow rate,oil-water interfacial tension,oil concentration,oil viscosity and oil particle size on the characteristics of oil droplets coalescence are studied by numerical simulation and experimental test.The results show that with the increase of flow rate,the coalescence effect of oil droplets increases first and then decreases.When the flow rate is between 14m~3/h and 16m~3/h,the oil droplets coalescence can achieve the best result under this working condition.Increasing the oil concentration can increase the proportion of large oil drops and also increase the number of small oil drops.Thus,during the oil-water separation,more oil droplets will remain in the discharged water phase.Increasing the inlet oil particle size and reducing the oil viscosity can promote the coalescence of oil droplets.Increasing the oil-water interfacial tension can reduce the probability of oil droplet breakage and improve the oil-water separation efficiency.These results can play a guiding role in the design of the vane-type hydrocyclone. |
|
来源
|
水动力学研究与进展. A辑
,2020,35(4):420-427 【核心库】
|
|
DOI
|
10.16076/j.cnki.cjhd.2020.04.002
|
|
关键词
|
油水分离
;
导流片
;
旋流场
;
离散相
;
数值模拟
|
|
地址
|
1.
中国科学院大学工程科学学院, 北京, 100049
2.
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-4874 |
|
学科
|
力学 |
|
基金
|
国家自然科学基金
|
|
文献收藏号
|
CSCD:6793735
|
参考文献 共
13
共1页
|
|
1.
吴应湘. 油水分离技术.
力学进展,2015,45:201506
|
CSCD被引
1
次
|
|
|
|
|
2.
Yin K. Femtosecond laser induced robust periodic nanoripple structured mesh for highly efficient oil-water separation.
Nanoscale,2017,9(37):14229-14235
|
CSCD被引
19
次
|
|
|
|
|
3.
Singh B P. Ultrasonication for breaking water-in-oil emulsions.
Proceedings Indian National Science Academy,1992,58(3):181-194
|
CSCD被引
1
次
|
|
|
|
|
4.
孙中雪.
生物可降解材料PLA在油水分离方面的研究与应用,2013
|
CSCD被引
3
次
|
|
|
|
|
5.
吴应湘. 管道式油气水高效分离技术.
科技促进发展,2015(3):374-379
|
CSCD被引
4
次
|
|
|
|
|
6.
陈颂阳. 管道式油水分离系统分离特性研究.
水动力学研究与进展(A辑),2013,28(6):637-643
|
CSCD被引
2
次
|
|
|
|
|
7.
蔡亮. 旋流分离器在去除航空煤油固相杂质中的应用研究.
水动力学研究与进展(A辑),2018,33(1):73-80
|
CSCD被引
1
次
|
|
|
|
|
8.
Bennett M. Monitoring the operation of an oil/water separator using impedance tomography.
Minerals Engineering,2004,17(5):605-614
|
CSCD被引
3
次
|
|
|
|
|
9.
Liu H F. OIL/WATER SEPARATION IN A LIQUID-LIQUID CYLINDRICAL CYC-LONE.
Journal of Hydrodynamics, Ser. B,2012,24(1):116-123
|
CSCD被引
9
次
|
|
|
|
|
10.
Liu S. Breakup and coalescence regularity of non-dilute oil drops in a vane-type swirling flow field.
Chemical Engineering Research and Design,2018,129:35-54
|
CSCD被引
5
次
|
|
|
|
|
11.
Luo H.
Coalescence, breakup and liquid circulation in bubble column reactors,1993
|
CSCD被引
15
次
|
|
|
|
|
12.
Gao S. CFD numerical simulation of flow velocity characteristics of hydrocyclone.
Transactions of Nonferrous Metals Society of China,2011,21(12):2783-2789
|
CSCD被引
11
次
|
|
|
|
|
13.
Im I T. A numerical study of the flow characteristics and separation efficiency of a hydrocyclone.
KSCE Journal of Civil Engineering,2018,22(11):4272-4281
|
CSCD被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问