帮助 关于我们

返回检索结果

淬火温度对Ti-4A1-4.5Mo合金马氏体类型的影响
INFLUENCE OF QUENCHING TEMPERATURE ON MARTENSITE TYPE IN Ti-4A1-4.5Mo ALLOY

查看参考文献15篇

李长富 1   李阁平 1 *   杨义 2   杨柯 1  
文摘 对Ti-4A1-4.5Mo合金经不同固溶温度淬火处理后的相组成进行了分析,结果表明,当合金在相变点以上温度淬火后,可以获得hcp结构a~1马氏体; 随固溶温度降低,淬火后斜方a''马氏体出现,并在一定的温度范围内与a~1马氏体共存; 在 800℃淬火,a''马氏体消失,合金由a和β相构成; a''马氏体显著降低β转变组织的硬度.EDS分析表明, Mo含量并不是决定马氏体类型的唯一因素
其他语种文摘 There are many discrepancies in the literatures concerning the martensite constitution in theα+β double phase titanium alloys after quenching,so the Ti-4Al-4.5Mo alloy was selected to analysis further the martensite phase transformation in the alloy. The results show that when the quenching temperature is above the(α+β)/βtransformation temperature (925 0C), the hexagonal martensite(α~1)formed. With the decrease of quenching temperature, another kind of martensite with orthorhombic structure (a") appeared which can coexist with α~1 in a certain temperature range. In the sample quenched at 800℃, the a" disappeared, and the alloy only contains α and β phases. The a'' martensite reduced the hardness of martensite transformed structure remarkably. EDS analysis indicated that the content of βstabilized element (Mo) is not the only factor determining the martensitic type
来源 金属学报 ,2010,46(9):1061-1065 【核心库】
DOI 10.3724/sp.j.1037.2010.00157
关键词 钛合金 ; 淬火 ; 马氏体 ; 显微硬度
地址

1. 中国科学院金属研究所, 沈阳, 110016  

2. 西北有色金属研究院, 西安, 710000

语种 中文
文献类型 研究性论文
ISSN 0412-1961
学科 金属学与金属工艺
文献收藏号 CSCD:4033864

参考文献 共 15 共1页

1.  Davis R. J Mater Sci,1979,14:712 CSCD被引 18    
2.  Kharia K K. Metall Mater Trans.A,2001,32:671 CSCD被引 4    
3.  Wang Y H. Mater Sci Eng.A,2009,508:76 CSCD被引 20    
4.  张岷. Ti-4.4A1—3.8Mo合金的亚稳相变及其对硬度的影响. 材料研究学报,2008,22:68 CSCD被引 5    
5.  Peng W H. J Alloys Compd,2010,490:661 CSCD被引 1    
6.  Leyens C. Titatniutm and Titatniutm Alloys, Futn, datmentals and Applications,2003:22 CSCD被引 1    
7.  Lutjering G. Titanium, Engmeering Materials and Processes,2003:32 CSCD被引 1    
8.  Yang R. Acta Metall Mater,1992,40:1553 CSCD被引 3    
9.  Grujicic M. Mater Sci Eng.A,1992,151:217 CSCD被引 3    
10.  Ahmed T. J Mater Sci,1996,31:4267 CSCD被引 8    
11.  Kolachev A B. Titanium, Science and Technology,1973:1569 CSCD被引 1    
12.  Bagiriatskii I A. Sov Phys Dokl,1958,3:1014 CSCD被引 1    
13.  张喜燕. 钛合金及应用,2005:92 CSCD被引 1    
14.  Moffat D L. Metall Mater Trans.A,1988,19:1677 CSCD被引 12    
15.  Inamura T. Philos Mag,2007,87:3325 CSCD被引 9    
引证文献 3

1 王海 超低间隙TC4钛合金形变热处理工艺 材料热处理学报,2015,36(1):52-55
CSCD被引 5

2 彭聪 冷却速率对含Cu钛合金显微组织和性能的影响 金属学报,2017,53(10):1377-1384
CSCD被引 4

显示所有3篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号