文摘
|
提出了一种漫射板反射式大直径激光功率-能量测量方法.该方法利用漫射板良好的朗伯特性,根据双向反射分布函数定义,通过反射信号的测量,准确得到入射在漫射板上激光束的功率-能量.技术实现上,通过实验室标定,将功率-能量标准传递至漫射板-探测器系统,再利用标定好的系统实现外场大直径激光的测量.研究分析表明:运用该测量方法,不确定度可优于10%,能大大提高目前测量水平. |
其他语种文摘
|
A diffuser reflection method for laser beam power/energy measurement is proposed.Using the Lambert character of the diffuser,according to the definition of BRDF,through the reflect signal measurement,the power/energy of the laser incident on the diffuser can be achieved.In practice,on the basis of laboratory calibration,the power/energy standard is transferred into the diffuser-detector system,then the calibrated system is utilized to realized laser power/energy measurement in the field.The uncertainty analysis shows that uncertainty of the measurement is less than 10%,the method can greatly improve the accuracy of far-field spot power/energy measurement. |
来源
|
强激光与粒子束
,2009,21(10):1441-1445 【核心库】
|
关键词
|
激光功率-能量
;
红外漫射板
;
双向反射分布函数
;
标准传递
;
大直径激光束
|
地址
|
中国科学院安徽光学精密机械研究所, 安徽, 合肥, 230031
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1001-4322 |
学科
|
电子技术、通信技术 |
文献收藏号
|
CSCD:3688478
|