帮助 关于我们

返回检索结果

基于光催化性能的Cu-Ce/TiO_2湿性能
Cu-Ce/TiO_2Moisture Performance Based on Photocatalytic Performance

查看参考文献17篇

张浩 *  
文摘 以Cu(NO_3)_2 ·3H_2O和Ce(NO_3)_3 ·6H_2O为改性剂,采用溶胶-凝胶法制备Cu-Ce/TiO_2。探讨Cu-Ce负载量、 Cu与Ce摩尔比和煅烧温度对Cu-Ce/TiO_2性能的影响。利用SEM,LPSA,BET和UV-Vis测试Cu-Ce/TiO_2的表面形貌、粒度分布、孔结构和光学性能。结果表明:Cu-Ce负载量3%、Cu与Ce摩尔比1∶1、煅烧温度500℃时,制备的Cu-Ce/TiO_2具有良好的光催化性能与湿性能。Cu-Ce/TiO_2呈近似球体,具有较好的均匀化和分散性,其粒径分布为1202.98~5364.48nm,其中d_(50)为2437.57nm。Cu-Ce/TiO_2具有狭小瓶颈的“墨水瓶”型孔结构,其比表面积为105.55m~2/g,孔体积为0.1200~0.1246mL/g,平均孔直径为3.44~4.02nm。Cu-Ce掺杂促使Cu-Ce/TiO_2内部形成新的能级,提高捕获e-和h+的能力,增强光子的利用效率,促使吸收边带发生红移。
其他语种文摘 Cu(NO_3)_2·3H_2O and Ce(NO_3)_3·6H_2O were used as modifier to make Cu-Ce/TiO_2by solgel method.The influences of Cu-Ce loading capacity,Cu and Ce molar ratio,sintering temperature on Cu-Ce/TiO_2performance were explored.Then,surface morphology,particle size distribution, pore structure and optical property of Cu-Ce/TiO_2 were characterized by SEM,LPSA,BET and UVVis, respectively.The results show that:prepared Cu-Ce/TiO_2shows good photocatalytic-moisture performance when Cu-Ce loading capacity is 3%,Cu and Ce molar ratio is 1∶1and sintering temperature is at 500℃.Cu-Ce/TiO_2presents approximate sphere,with better uniformity and dispersibility and the particle size distribution is 1202.98-5364.48nm,with d_(50)2437.57nm.Cu-Ce/TiO_2has pore structure,approximate to an “ink bottle”with a narrow bottleneck,with the specific surface area 105.55m~2/g,hole size 0.1200-0.1246mL/g,and average pore diameter 3.44-4.02nm.Cu-Ce doping promotes to form a new energy level inside Cu-Ce/fiO_2so as to improve the ability to capture e-and h+,enhance the efficiency of photon utilization,and promote red shift of absorption sideband.
来源 材料工程 ,2018,46(1):114-118 【核心库】
DOI 10.11868/j.issn.1001-4381.2016.001100
关键词 Cu-Ce掺杂 ; 光-湿性能 ; TiO_2 ; 湿性能 ; 光催化性能
地址

安徽工业大学建筑工程学院, 安徽, 马鞍山, 243032

语种 中文
文献类型 研究性论文
ISSN 1001-4381
学科 环境污染及其防治
基金 国家自然科学基金青年基金资助项目 ;  高等学校优秀青年人才基金项目
文献收藏号 CSCD:6162172

参考文献 共 17 共1页

1.  Fujishima A. Electrochemical photolysis of water at a semiconductor electrode. Nature,1972,238(5358):37-38 被引 2849    
2.  Jing L Q. Effects of surface oxygen vacancies on photophysical and photochemical processes of Zn-doped TiO_2 nanoparticles and their relationships. The Journal of Physical Chemistry B,2006,110(36):17860-17865 被引 25    
3.  Zhao H M. Preparation of Zndoped TiO_2nanotubes electrode and its application in pentachlorophenol photoelectrocatalytic degradation. Chinese Science Bull,2007,52(11):1456-1461 被引 12    
4.  Tojo S. Iodine-doped TiO_2 photocatalysts:correlation between band structure and mechanism. Journal of Physical Chemistry C,2008,112(38):14948-14954 被引 22    
5.  Zhao D. Fabrication,characterization and photocatalytic activity of Gd~(3+)-doped titania nanoparticles with mesostructure. Microporous and Mesoporous Materials,2008,114(1/2/3):166-174 被引 14    
6.  Hamal D B. Synthesis,characterization, and visible light activity of new nanoparticle photocatalysis based on silver,carbon and sulfur-doped TiO_2. Journal of Colloid and Interface Science,2007,311(2):514-522 被引 20    
7.  Yu J G. Hydrothermal preparation and photocatalytic activity of hierarchically sponge-like macro-/mesoporous titania. Journal of Physical Chemistry C,2007,111(28):10582-10589 被引 15    
8.  陈其凤. 溶胶-凝胶-水热法制备Ce-Si/TiO_2及其可见光催化性能. 物理化学学报,2009,25(4):617-623 被引 14    
9.  王瑞芬. RE-B共掺杂片层TiO_2的合成及其光催化性能. 物理化学学报,2016,32(2):536-542 被引 6    
10.  Yu J G. Effects of hydrothermal temperature and time on the photocatalytic activity and microstructures of bimodal mesoporous TiO_2powders. Applied Catalysis B,2007,69(3):171-180 被引 32    
11.  刘阳龙. 铕掺杂的TiO_2空心微球的制备及光催化性能. 无机材料学报,2015,30(7):699-705 被引 10    
12.  尚建丽. 多孔载体相变材料的热湿综合性能. 浙江大学学报(工学版),2016,50(5):879-886 被引 13    
13.  张浩. Cu-TiO_2光催化降解甲醛气体的研究及应用. 新型建筑材料,2009,3(9):78-81 被引 15    
14.  张浩. Cu掺杂TiO_2光催化降解室内甲醛气体的实验研究. 过程工程学报,2012,12(4):696-701 被引 16    
15.  张浩. Ce掺杂TiO2催化剂的光催化性能. 过程工程学报,2011,11(3):514-518 被引 24    
16.  张浩. Cu - Ce / TiO_2的制备及其在室内甲醛气体中的光催化性能. 稀土,2014,35(6):72-78 被引 11    
17.  张浩. 基于正交设计与BP神经网络优化制备Cu-Ce/TiO_2的预测模型. 稀土,2015,36(2):72-77 被引 12    
引证文献 17

1 张浩 优化制备粒度均匀分布的Ce-Cu/TiO_2空心微球及其光–湿性能 过程工程学报,2019,19(1):195-201
被引 0 次

2 鲁进利 丙烯酸树脂-正十二烷醇相变微胶囊制备及性能表征 过程工程学报,2019,19(3):617-622
被引 5

显示所有17篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号