文摘
|
液态铅铋合金氧测控作为加速器驱动次临界系统(ADS)的关键技术之一,对抑制结构材料腐蚀具有重要作用.为深入开展氧测控技术研究,自主研制液态铅铋氧测量及控制实验装置,并基于该装置开展Pt/Air型氧传感器在饱和氧浓度下的稳定性与精确性测试实验.结果显示,在625~786 K温度范围内,Pt/Air型氧传感器电压信号经过传热产生的弛豫(<750 s)之后稳定性表现良好,测量值的最大绝对偏差为10 mV,最大相对偏差为1.5%,与理论值符合较好,其偏差主要来自热电压及氧化物的影响. |
其他语种文摘
|
Measurement and control of oxygen content in liquid lead-bismuth is one of the key technologies in accelerator-driven subcritical system (ADS).It plays a vital role to resist structural material corrosion. Liquid lead-bismuth oxygen measurement and control experimental device was designed and constructed independently to study the key technology. Pt/Air reference electrode oxygen sensors were tested for the stability and veracity in the saturated oxygen concentration with the device. The results showed that in the temperature ranging from 625 ~ 786 K, it performed good stability after relaxation time less than 750 s for thermal equilibrium relaxation affect by the low heat conduction of YSZ ceramic tube. The voltage signal of Pt/Air sensor was in good agreement with the theoretical value,with absolute deviation less than 10 mV and relative deviation less than 1.5%.Reason for deviation came from thermoelectric voltages and oxide impurities. |
来源
|
核科学与工程
,2015,35(1):1-7 【核心库】
|
关键词
|
加速器驱动次临界系统
;
液态铅铋合金
;
氧测控
;
氧传感器
;
稳定性
;
精确性
|
地址
|
1.
中国科学技术大学, 中国科学院中子输运理论与辐射安全重点实验室, 安徽, 合肥, 230027
2.
中国科学院核能安全技术研究所, 中国科学院中子输运理论与辐射安全重点实验室, 安徽, 合肥, 230031
3.
FDS 团队
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0258-0918 |
学科
|
机械、仪表工业 |
基金
|
中国科学院战略性先导科技专项
;
中国科学院知识创新工程重要方向项目
;
国家自然科学基金
|
文献收藏号
|
CSCD:5402866
|