帮助 关于我们

返回检索结果

基于质点弹道方程的破片外弹道特性分析
Analysis of External Ballistic Characteristics of Framents Based on Mass-point Ballistics Equation

查看参考文献9篇

刘官 1,2   孙浩 3   印立魁 2 *   马林 3   陈智刚 2  
文摘 为了准确表征破片弹道,基于质点弹道方程和经典破片阻力公式建立了破片运动方程,对典型工况的钢破片和钨破片外弹道特性进行了计算分析。结果表明破片最大射程对应的射角约为21°;随着破片初始射角的增大,破片落地动能先急剧减小,在约10°射角后又缓慢增加。采用抛物线和射线2种形式的计算方法分析了典型破片在不同初始射角条件下的落地动能和最大射程,该方法对破片最大杀伤半径、破片的毁伤效能评估、杀爆战斗部动静爆试验靶场布置位置的合理性和弹药储存安全距离的判断等方面具有一定参考价值。
其他语种文摘 In order to accurately characterize the fragment trajectory,the movement equation of the fragment was established based on the mass-point trajectory equation and the resistance formula of classic fragment. The external ballistic characteristics of the steel fragment and the tungsten fragment under typical working conditions were calculated and analyzed. The results show that the shooting angle corresponding to the maximum range of fragments is about 21°. With the increase of the initial shooting angle of fragments, the kinetic energy of fragments on the ground decreases sharply first,and then showly increases after about 10°. By applying the two calculation forms of parabola and ray, the landing kinetic energy and maximum fire range of typical fragments under the conditions of different initial shooting angles were analyzed. The proposed method has a certain reference value for the maximum kill-radius and damage effectiveness evaluation of fragments, the rationality of layout position in the dynamic and static detonation test range of explosive warhead,and the judgment of storage safety-distance of ammunition.
来源 弹道学报 ,2021,33(3):32-36 【核心库】
DOI 10.12115/j.issn.1004-499X(2021)03-005
关键词 外弹道 ; 质点弹道 ; 破片 ; 射程 ; 射角
地址

1. 中北大学机电工程学院, 山西, 太原, 030051  

2. 中北大学, 地下目标毁伤技术国防重点学科实验室, 山西, 太原, 030051  

3. 中国兵器工业试验测试研究院, 陕西, 渭南, 714200

语种 中文
文献类型 研究性论文
ISSN 1004-499X
学科 武器工业
文献收藏号 CSCD:7065553

参考文献 共 9 共1页

1.  韩子鹏. 弹箭外弹道学,2014 CSCD被引 62    
2.  黄正祥. 终点效应,2014:11-111 CSCD被引 1    
3.  王儒策. 弹丸终点效应,1993:100-101 CSCD被引 2    
4.  隋树元. 终点效应学,2007:167-168 CSCD被引 3    
5.  华恭. 榴弹作用和设计理论,1975 CSCD被引 1    
6.  崔瀚. 基于MATLAB/Simulink的通用质点外弹道程序设计. 电子测试,2017(1):1-2 CSCD被引 3    
7.  江山. 常微分方程初值问题的高级泰勒与龙格-库塔法之应用对比. 高师理科学刊,2019,39(12):12-15 CSCD被引 2    
8.  张晓云. 一种枪械射弹散布预测方法. 弹道学报,2019,31(3):24-29 CSCD被引 3    
9.  柏迅. 基于蒙特卡罗法的枪弹弹头外弹道散布特性分析. 兵工自动化,2017(5):59-61 CSCD被引 2    
引证文献 2

1 王佳 基于光幕阵列的近炸引信炸点坐标测量方法 弹道学报,2023,35(4):80-87
CSCD被引 0 次

2 李敬 采用双区截光幕测速装置标定靶距的方法 光子学报,2024,53(2):0212004
CSCD被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号