文摘
|
高速旋转的飞轮在给定外径和质量的情况下,轮缘采用先进的碳纤维缠绕,提高飞轮的转速,从而增大飞轮的储能密度,解决了飞轮轮缘因高速旋转而断裂破坏的问题。本文采用三维实体元分析计算复合材料飞轮工作时的应力分布,为安全合理设计复合材料飞轮提供依据。 |
其他语种文摘
|
The use of advanced carbon-fiber composite on a flywheel rotor results in not only the increase of energy density by increasing the rotating speed when the outer diameter and mass are fixed, but also solution of the fracture problem of the flywheel rotor. The calculation on the stress distribution is conducted in the present paper according to the working situation of the flywheel. These provide the basis for proper design of composite flywheels. |
来源
|
复合材料学报
,2002,19(1):113-116 【核心库】
|
关键词
|
复合材料飞轮
;
储能密度
;
应力分析
;
有限元
|
地址
|
1.
中国科学技术大学力学与机械工程系, 合肥, 230027
2.
中国科学院力学研究所, 北京, 100080
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-3851 |
学科
|
能源与动力工程 |
文献收藏号
|
CSCD:983374
|