|
SiC颗粒增强6061Al基复合材料的动态拉伸性能 I应变硬化
Dynamic tensile deformation of SiC_p/6061Al composite part 1 strain hardening characteristic
查看参考文献11篇
文摘
|
利用拉伸Split Hopkinson bar实验装置研究了SiC_p/6061Al复合材料及其基体合金的动态拉伸性能及应变硬化行为。结果表明,与静态加载类似,在动态加载条件下,SiC_p/6061Al复合材料的强度高于基体合金的强度,其断裂延伸率低于基体合金的断裂延伸率。在低应变动态拉伸时,复合材料的应变硬化指数高于Al合金材料的应变硬化指数,随着应变的增加,复合材料的应变硬化指数迅速下降,以至低于基体合金的应变硬化指数。 |
其他语种文摘
|
An investigation was made on the dynamic tensile deformation and strain hardening characteristic of a SiC_p/6061Al composite and its matrix alloy using tensile split Hopkinson pressure bar apparatus. It is shown that under dynamic loading condition, as in the case of static loading, the strength of the SiC_p/6061Al is higher and its elongation to fracture is lower than those of 6061Al alloy. At a low strain, the dynamic tensile strain hardening exponent of the studied composite is higher than that of its matrix alloy. However, the strain hardening exponent of the composite decreases rapidly with increasing strain, and becomes lower than that of its matrix alloy at a higher strain. The deformation and damage mechanisms are discussed in terms of dislocation. |
来源
|
材料研究学报
,2002,16(3):285-288 【核心库】
|
关键词
|
复合材料
;
动态拉伸
;
应变速率
;
应变硬化
|
地址
|
1.
中国科学院金属研究所, 沈阳材料科学国家(联合)实验室
2.
日本丰桥技术科学大学
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1005-3093 |
学科
|
一般工业技术 |
基金
|
国家973计划
|
文献收藏号
|
CSCD:960902
|
参考文献 共
11
共1页
|
1.
A. Marchand.
Eng.Fract.Mech.,1998,30:295
|
被引
3
次
|
|
|
|
2.
S. Yadav.
Acta Metall.Mater.,1995,43:4453
|
被引
10
次
|
|
|
|
3.
Hong S I.
Acta Metall.Mater.,1993,41:2337
|
被引
8
次
|
|
|
|
4.
J. Harding.
Proceedings. of the 6th Interantional Symposium on Composite Materials,1987:224
|
被引
1
次
|
|
|
|
5.
U. S. Lindholm.
J.Mech.Phys.Solids,1964,12:317
|
被引
38
次
|
|
|
|
6.
M. Guden.
Mater.Sci.Eng.,1998,242A:141
|
被引
2
次
|
|
|
|
7.
冯端. Mechanical Properties of Metals.
金属物理学Vol.3,1999:249
|
被引
1
次
|
|
|
|
8.
M. F. Ashby.
Phils.Mag. A,1984,14:1157
|
被引
1
次
|
|
|
|
9.
R. J. Arsenault.
Mater.Sci.Eng.,1984,64A:171
|
被引
8
次
|
|
|
|
10.
钱立和. SiC颗粒增强6061Al基复合材料的动态拉伸性能 II应变速率效应.
材料研究学报,2002,16(3):289
|
被引
5
次
|
|
|
|
11.
Tong W.
J.Mech.Phys.Solids,1992,40:1251
|
被引
4
次
|
|
|
|
|
|