帮助 关于我们

返回检索结果

冲击载荷下纤维复合材料裂纹起裂的实验研究
Experimental Studies on the Initiation of Crack in Fiber-reinforced Composites under Impact Loading

查看参考文献10篇

刘希国 1   蒋元兴 2   赵红平 1   吴永礼 1   张双寅 1  
文摘 采用SHTB技术对纤维增强复合材料裂纹动态起裂行为进行了实验研究。使用应变片方法确定了裂纹的起裂时间,结合有限元数值模拟得到了裂纹的起裂韧性;同时观察了裂纹在冲击载荷作用下的裂纹起裂和扩展方式,分析了纤维的铺层角度对裂纹起裂和扩增的影响。
其他语种文摘 It is investigated that the initiation of crack in fiber-reinforced composites under impact loading by SHTB experimental technology in this paper. The initiation time of crack is measured by strain gauge on the sample. The fracture toughness of the composite material is determined by FEM numerical simulation. The patterns of fracture of the crack under impact are observed and the influence of plies angle on the growth of the crack is analyzed.
来源 爆炸与冲击 ,2002,22(2):111-118 【核心库】
关键词 纤维复合材料 ; 裂纹的动态起裂 ; 冲击 ; SHTB实验
地址

1. 中国科学院力学研究所, 北京, 100080  

2. 中国运载火箭技术研究院材料与工艺研究所, 北京, 100076

语种 中文
文献类型 研究性论文
ISSN 1001-1455
学科 力学
文献收藏号 CSCD:955397

参考文献 共 10 共1页

1.  Aliyu A A. Effects of Strain Rate on Delamination Fracture Toughness of Graphite/Epoxy,1985:336-348 被引 2    
2.  Mall S. Loading Rate Effect on Interlaminar Fracture Toughness of a Themo-plastic Composite. J Compos Mater,1987,21:569-579 被引 2    
3.  Smiley A J. Rate Effects on Mode I Interlaminar Fracture Toughness in Composite Materials. J Compos Matter,1987,21:670-687 被引 3    
4.  绕世国. 材料动态断裂的理论和实验研究,1992:19-55 被引 1    
5.  王从约. 杆-杆型冲击拉伸试验系统的动力学数值分析,1996:26-137 被引 1    
6.  Harding J. A Tensile Testing Technique for Fiber-reinforced Composites at Impact Rates of Strain. J Mater Sci,1983,18:1810 被引 18    
7.  Dally J W. Strain Gage Methods for Measuring the Opening Mode Stress Intensity Factor K_1. Proc 1985 SEM Spring Conf On Exp Mech,1985:851-860 被引 1    
8.  Dally J W. Dynamic Measurements of Initiation Toughness at High Loading Rates. Experimental Mechanics,1988,28(9):298-303 被引 6    
9.  林君山. Charpy裂纹试样的起裂点确定与动态断裂韧性. 金属学报(A),1992,28(4):170-175 被引 1    
10.  Shih C F. Crack Extension Modeling with Singular Quadratic Isoparametric Elements. Inter J Fracturere,1976,12:647-651 被引 8    
引证文献 1

1 张璐 亚麻/聚丙烯复合材料板材的制备及其冲击性能 材料科学与工程学报,2011,29(5):753-756,741
被引 0 次

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号