航空装备电子束增材制造技术发展及路线图
Technology development and roadmap of electron beam additive manufacturing for aviation equipments
查看参考文献46篇
|
文摘
|
增材制造技术在航空装备领域具有广泛的发展前景。作为重要的金属增材制造工艺方法,电子束增材制造正处于快速发展阶段。电子束熔丝增材制造技术可满足航空大尺寸结构件的快速低成本制造,并可用于高价值零件的修复。电子束选区熔化增材制造技术在复杂结构以及难熔合金制件的制造方面具有显著优势。本文在对国内外电子束增材制造技术现状和发展趋势分析的基础上,从发展需求、目标、共性关键技术、应用、战略支撑与保障5个方面综合分析,绘制了面向2035年的航空装备电子束增材制造技术路线图,以期为航空装备电子束增材制造技术发展提供参考。 |
|
其他语种文摘
|
Additive manufacturing technology has a broad development prospect in the field of aviation equipments. As an important metal additive manufacturing process, the electron beam additive manufacturing is in a rapid development stage. The wirefeed electron beam additive manufacturing can meet the requirements of rapid and low-cost manufacturing of aviation large size structural parts and can be used to repair high-value damaged parts. Electron beam selective melting has obvious advantages in the manufacturing of complex structures and refractory alloy parts. Based on the analysis of the state-of-arts of the electron beam additive manufacturing technology, the roadmap of the electron beam additive manufacturing for aviation equipments in 2035 is comprehensively analyzed and drawn from the five aspects of development needs, objectives, common key technologies, applications, strategic support and guarantee in order to provide reference for the development of the electron beam additive manufacturing technology of aviation equipments. In 2035, a perfect additive manufacturing standard system is to be built; and electron beam additive manufactured key load bearing components for airplane and aeroengine realize mass production and application. |
|
来源
|
航空材料学报
,2023,43(1):28-38 【核心库】
|
|
DOI
|
10.11868/j.issn.1005-5053.2022.000209
|
|
关键词
|
航空装备
;
电子束增材制造
;
发展现状
;
技术路线图
|
|
地址
|
中国航发北京航空材料研究院3D打印研究与工程技术中心, 北京, 100095
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1005-5053 |
|
学科
|
金属学与金属工艺 |
|
文献收藏号
|
CSCD:7441003
|
参考文献 共
46
共3页
|
|
1.
闫雪. 增材制造技术在航空发动机中的应用及发展.
航空制造技术,2016(21):70-75
|
被引
9
次
|
|
|
|
|
2.
李涤尘. 增材制造——面向航空航天制造的变革性技术.
航空学报,2022,43(4):525387
|
被引
8
次
|
|
|
|
|
3.
任慧娇. 增材制造技术在航空航天金属构件领域的发展及应用.
航空制造技术,2020,63(10):72-77
|
被引
6
次
|
|
|
|
|
4.
巩水利.
电子束熔丝沉积成形技术及应用,2021
|
被引
1
次
|
|
|
|
|
5.
熊华平.
航空金属材料增材制造技术,2019
|
被引
4
次
|
|
|
|
|
6.
秦仁耀. TiAl基合金的增材制造技术研究进展.
机械工程学报,2021,57(8):115-132
|
被引
7
次
|
|
|
|
|
7.
Wesley A T. Correlation between microstructure and mechanical properties in an Inconel 718 deposit produced via electron beam freeform fabrication.
Journal of Manufacturing Science and Engineering,2014,136:061005
|
被引
1
次
|
|
|
|
|
8.
Matz J E. Carbide formation in alloy 718 during electron-beam solid freeform fabrication.
Metallurgical & Materials Transactions A,2002,33(8):2559-2567
|
被引
13
次
|
|
|
|
|
9.
Wanjara P. Electron beam freeforming of stainless steel using solid wire feed.
Materials and Design,2007,28:2278-2286
|
被引
7
次
|
|
|
|
|
10.
Wanjara P. Titanium alloy repair with wire-feed electron beam additive manufacturing technology.
Advances in Materials Science and Engineering,2019:1-23
|
被引
1
次
|
|
|
|
|
11.
Lach C L. Effect of electron beam freeform fabrication (EBF3) processing parameters on composition of Ti-6-4.
18th AeroMat Conference and Exposition,2007:1-19
|
被引
1
次
|
|
|
|
|
12.
Buter T M. Evolution of texture from a single crystal Ti-6Al-4V substrate during electron beam directed energy deposition.
Metallurgical and Materials Transactions A,2017,48(10):4441-4446
|
被引
1
次
|
|
|
|
|
13.
Gonzales D. Using powder cored tubular wire technology to enhance electron beam freeform fabricated structures.
TMS 145th Annual Meeting & Exhibition,2016:183-189
|
被引
1
次
|
|
|
|
|
14.
Mitzner S.
Grain refinement of freeform fabricated Ti-6Al-4V alloy using beam/arc modulation,2012:536-555
|
被引
1
次
|
|
|
|
|
15.
Craig A B. Effect of compositional changes on microstructure in additively manufactured aluminum alloy 2139.
Materials Characterization,2018,143:50-58
|
被引
1
次
|
|
|
|
|
16.
陈国庆. 国内外电子束熔丝沉积增材制造技术发展现状.
焊接学报,2018,39(8):123-128
|
被引
17
次
|
|
|
|
|
17.
常坤. 金属材料增材制造及其在民用航空领域的应用研究现状.
材料导报,2021,35(3):3176-3182
|
被引
14
次
|
|
|
|
|
18.
巩水利. 金属增材制造技术在航空领域的发展与应用.
航空制造技术,2013(13):66-71
|
被引
49
次
|
|
|
|
|
19.
Vladimir V P J. The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens.
Additive Manufacturing,2018,22:834-843
|
被引
1
次
|
|
|
|
|
20.
Haize G. Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM).
Materials Science and Engineering:A,2017,685:417-428
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问