基于连续-非连续单元法的三维脆性颗粒冲击破碎特性分析
Analysis of 3Dbrittle particle impact crushing characteristics based on CDEM
查看参考文献20篇
|
文摘
|
通过在连续-非连续单元法(CDEM)中引入考虑应变率效应的断裂能本构以及能量统计算法,实现了球体冲击破碎过程中损伤破裂程度及能量演化的定量分析。计算结果表明,冲击破碎过程分为接触蓄能阶段、损伤破碎阶段和碎块飞散阶段。首先,颗粒的部分动能转化为单元弹性变形能,随后这部分变形能和动能迅速转化为摩擦消耗、阻尼消耗及弹簧断裂能,破碎基本完全后碎块继续飞散。不同冲击速度下,颗粒分别出现了反弹、开裂、破碎和粉碎的现象。随冲击速度的增加,D50的变化速率逐渐放缓,破碎块度逐渐趋于稳定;破裂度、损伤度以及平均损伤因子的变化速率先增加后放缓,颗粒破坏以拉伸破坏为主。以上结论可为脆性材料冲击破碎工艺的优化设计提供依据。 |
|
其他语种文摘
|
By introducing the fracture energy mechanism considering the strain rate effect and the statistical energy algorithm into the continuum-discontinuum element method(CDEM),the quantitative analysis of the damage and fracture degree and energy evolution in the process of spherical impact crushing is realized.The results show that the impact crushing process is divided into contact energy storage stage,damage fracture stage and fragmentation stage.First of all,part of the kinetic energy of the particles is transformed into the elastic deformation energy of the element,and then this part of the deformation energy and kinetic energy is rapidly transformed into friction-induced energy dissipation consumption,damping dissipation and spring fracture energy.After the crushing is nearly complete,the fragments continue to disperse.At different impact velocities,the particles rebound,crack,break and smash.With the increase of impact velocity,the change ratio of D50gradually slows down and the fragmentation gradually becomes stable.Secondly,the change ratio of fracture degree,damage degree and average damage factor increase and then slow down.The particle damage is mainly through tensile failure.The above conclusions can provide a basis for the optimization design of impact crushing process of brittle materials. |
|
来源
|
计算力学学报
,2022,39(3):299-306 【核心库】
|
|
DOI
|
10.7511/jslxCMGM202205
|
|
关键词
|
连续-非连续单元法
;
颗粒冲击破碎
;
破碎块度
;
数值模拟
;
断裂能
|
|
地址
|
1.
中国科学院力学研究所, 北京, 100190
2.
中国科学院大学工程科学学院, 北京, 100049
3.
西安近代化学研究所, 西安, 710065
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1007-4708 |
|
学科
|
数学;力学 |
|
基金
|
国家重点研发计划
|
|
文献收藏号
|
CSCD:7257090
|
参考文献 共
20
共1页
|
|
1.
Cundall P. A computer model for simulating progressive, large-scale movements in blocky rock systems.
Proc Int Symp on Rock Fracture,1971,1(ii/b):8-11
|
被引
1
次
|
|
|
|
|
2.
徐琨. 基于离散元法的颗粒破碎模拟研究进展.
岩土工程学报,2018,40(5):880-889
|
被引
22
次
|
|
|
|
|
3.
Cil M B. DEM assessment of scaling laws capturing the grain size dependence of yielding in granular soils.
Granular Matter,2016,18(3):1-15
|
被引
11
次
|
|
|
|
|
4.
Xu M. DEM study on the effect of particle breakage on the macro-and micro-behavior of rockfill sheared along different stress paths.
Computers and Geotechnics,2017,89:113-127
|
被引
10
次
|
|
|
|
|
5.
Deng X L. Numerical investigation of impact breakage mechanisms of two spherical particles.
Powder Technology,2020,364:954-962
|
被引
2
次
|
|
|
|
|
6.
Zheng K H. Numerical simulation of the impact-breakage behavior of non-spherical agglomerates.
Powder Technology,2015,286:582-591
|
被引
5
次
|
|
|
|
|
7.
黄令军. 基于离散单元法球形颗粒碰撞破碎行为的数值模拟.
中国粉体技术,2014,20(3):60-63
|
被引
5
次
|
|
|
|
|
8.
Munjiza A. The combined finite-discrete element method for structural failure and collapse.
Engineering Fracture Mechanics,2004,71(4/6):469-483
|
被引
22
次
|
|
|
|
|
9.
马刚. 岩石破坏全过程的连续-离散耦合分析方法.
岩石力学与工程学报,2011,30(12):2444-2455
|
被引
10
次
|
|
|
|
|
10.
王永亮. 自适应有限元-离散元算法、ELFEN软件及页岩体积压裂应用.
工程力学,2018,35(9):17-25,36
|
被引
6
次
|
|
|
|
|
11.
Guo L W. A numerical investigation of mesh sensitivity for a new three-dimen-sional fracture model within the combined finite-discrete element method.
Engineering Fracture Mechanics,2016,151:70-91
|
被引
2
次
|
|
|
|
|
12.
Ma G. A hybrid approach for modeling of breakable granular materials using combined finite-discrete element method.
Granular Matter,2016,18(1):1-17
|
被引
6
次
|
|
|
|
|
13.
Ma G. Modeling the fragmentation of rock grains using computed tomography and combined FDEM.
Powder Technology,2017,308:388-397
|
被引
24
次
|
|
|
|
|
14.
Ma G. Fractal behavior and shape characteristics of fragments produced by the impact of quasi-brittle spheres.
Powder Technology,2018,325:498-509
|
被引
7
次
|
|
|
|
|
15.
Ma G. The effect of different fracture mechanisms on impact fragmentation of brittle heterogeneous solid.
International Journal of Impact Engineering,113:132-143
|
被引
1
次
|
|
|
|
|
16.
李世海.
滑坡研究中的力学方法,2018
|
被引
8
次
|
|
|
|
|
17.
王杰. 基于单元破裂的岩石裂纹扩展模拟方法.
力学学报,2015,47(1):105-118
|
被引
18
次
|
|
|
|
|
18.
冯春. 冲击载荷下赤铁矿动态抗压强度及破碎特性.
郑州大学学报(理学版),2019,51(1):107-112
|
被引
2
次
|
|
|
|
|
19.
Lin Q D. Cohesive fracture model of rocks based on multi-scale model and lennard-jones potential.
Engineering Fracture Mechanics,2021,246:107627
|
被引
1
次
|
|
|
|
|
20.
林钦栋.
脆性材料渐进破坏的破裂加剧效应及能量耗散模型,2021
|
被引
1
次
|
|
|
|
|
了解气象卫星更多信息，请访问