帮助 关于我们

返回检索结果

基于扭摆的微冲量测量方法及实验研究
MICRO IMPULSE MEASUREMENT METHOD AND EXPERIMENTAL RESEARCH BASED ON TORSION PENDULUM

查看参考文献30篇

杨超 1,2   贺建武 1   章楚 1   康琦 1,2   段俐 1,2  
文摘 超高微重力水平的卫星平台在空间引力波探测、地球重力场测量中发挥着重要的作用,脉冲微推力器可以帮助微重力卫星实现姿态控制.微冲量是评价脉冲微推力器性能的重要指标之一,常用的基于扭摆的微冲量测量方法有两种,方法一是根据单个冲量元瞬间作用于无阻尼扭摆后,扭摆转动最大角位移计算冲量,方法二是根据高固定频率的连续脉冲作用于有阻尼扭摆后,扭摆转动的平均角位移计算冲量.为了在地面实现对脉冲微推力器的微冲量测量,利用已有的基于扭摆的亚微牛级推力测量系统,进行了实验研究.利用静电梳齿产生的标准静电力标定已有的扭摆推力测量系统,通过电容式位移传感器测量扭摆角位移,进而得到推力与角位移的关系,以及其他扭摆系统参数;然后,根据两种冲量测量方法,再以电磁螺线圈与永磁体分别产生瞬时磁力与固定频率的磁力作用于扭摆,研究推力测量系统微冲量测量性能.实验结果表明:使用方法一时,推力测量系统冲量测量范围为0.05 ~ 220 μN·s,分辨力可达到0.02 μN·s;而利用方法二测量微冲量相比于方法一而言,能够扩大冲量测量范围,提高冲量分辨能力.
其他语种文摘 Satellite platforms with ultra-high microgravity levels play an important role in space gravitational wave detection and Earth's gravitational field measurement.Pulsed micro-thrusters can help microgravity satellites achieve posture adjustment and control.The magnitude of the micro impulse is one of the important indicators to evaluate the propulsion performance of the pulsed micro thruster.There are two commonly used methods for measuring micro impulse based on torsion pendulum.The first method is to calculate the impulse based on the maximum angular displacement of the torsion pendulum after a single impulse element acts on the undamped torsion pendulum momentarily.The second method is to calculate the impulse based on the average angular displacement of the torsion pendulum rotation after the same high fixed frequency pulse is applied to the damped torsion pendulum.In order to realize the micro-impulse measurement of the pulse micro-thruster on the ground,the existing sub-micron-level thrust measurement system based on the torsion pendulum was used to conduct experimental research.We use the standard electrostatic force generated by the electrostatic comb to calibrate the existing torsion pendulum thrust measurement system,measure the torsion angular displacement through the capacitive displacement sensor,and obtain the relationship between thrust and angular displacement,as well as other torsion pendulum system parameters;Then,according to the two impulse measurement methods,the electromagnetic solenoid and the permanent magnet are used to generate the instantaneous magnetic force and the fixed frequency magnetic force to act on the torsion pendulum to study the micro impulse measurement capability of the thrust measurement system.The experimental results show that the impulse measurement range of the thrust measurement system is from 0.05 μN·s to 220 μN·s,and the impulse measurement resolution can reach 0.02 μN·s;Compared with method 1,using method 2 to measure micro-impulse can expand the impulse measurement range and improve the impulse resolution ability.
来源 力学学报 ,2022,54(3):669-677 【核心库】
DOI 10.6052/0459-1879-21-191
关键词 微重力 ; 扭摆 ; 脉冲微推力器 ; 微冲量测量 ; 推力测量系统
地址

1. 中国科学院力学研究所, 北京, 100190  

2. 中国科学院大学工程科学学院, 北京, 100049

语种 中文
文献类型 研究性论文
ISSN 0459-1879
学科 物理学
基金 国家重点研发计划 ;  中国科学院战略性先导科技专项
文献收藏号 CSCD:7195176

参考文献 共 30 共2页

1.  杨乐. 脉冲等离子体推力器研究综述. 火箭推进,2006,32(2):32-36 被引 7    
2.  Koizumi H. Development of thrust stand for low impulse measurement from microthrusters. Review of Scientific Instruments,2004,75(10):3185-3190 被引 14    
3.  Yang Y X. A torsion balance for impulse and thrust measurements of micro-Newton thrusters. Review of Scientific Instruments,2012,83(1):153001 被引 3    
4.  杨元侠. 微牛顿量级推进器的推力性能研究.[博士论文],2012 被引 1    
5.  方娟. 激光干涉法在扭摆法测量微冲量中的应用. 推进技术,2010,31(1):119-122 被引 6    
6.  Ketsdever A D. Thrust stand micromass balance for the direct measurement of specific impulse. Journal of Propulsion & Power,2008,24(6):1376-1381 被引 4    
7.  Gamero-Castano M. A torsional balance for the characterization of microNewton thrusters. Review of Entific Instruments,2003,74(10):4509-4514 被引 9    
8.  叶继飞. 基于扭秤的激光干涉差动测量微小冲量方法. 应用光学,2013,34(6):990-994 被引 8    
9.  Cubbin E A. Pulsed thrust measurements using laser interferometry. Review of Entific Instruments,1997,68(6):2339-2346 被引 13    
10.  Haag T W. Thrust stand for pulsed plasma thrusters. Review of Scientific Instruments,1997,68(5):2060-2060 被引 9    
11.  罗乐乐. 基于扭摆测量系统的微冲量测量方法. 机电产品开发与创新,2017(2):70-73 被引 5    
12.  Dulligan M. Resonant operation of a micropropulsion thrust stand. AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit,2002 被引 1    
13.  Zhou W J. A micronewton thrust stand for average thrust measurement of pulsed microthruster. Review of Scientific Instruments,2013,84(12):407-434 被引 2    
14.  金星. 用于脉冲微推力器的枢轴式微冲量测量系统设计方法. 红外与激光工程,2019,48(S1):97-103 被引 1    
15.  金星. 一种用于微小推力冲量测量的扭摆系统参数标定方法. 推进技术,2015,36(10):1554-1559 被引 8    
16.  王广宇. 微冲量测量的建模误差分析. 推进技术,2009,30(4):509-512 被引 6    
17.  洪延姬. 微推力测量方法及其关键问题分析. 航空学报,2013,34(10):2287-2299 被引 18    
18.  鲁高飞. PPT的高精度微冲量测量技术研究.[硕士论文],2014 被引 1    
19.  王宇. 一种多脉冲微推力的测量方法. 航空学报,2009,30(12):2257-2262 被引 4    
20.  王广宇. 脉冲微推力器平均推力测量研究. 推进技术,2009,30(5):638-640 被引 2    
引证文献 2

1 汤海滨 空间电推进微小推力测量技术 推进技术,2023,44(6):2301001
被引 0 次

2 王嘉彬 闭环控制下单丝扭摆微牛级推力测量系统 电子测量与仪器学报,2023,37(9):93-101
被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号