3D打印微波吸收材料研究进展
Progress of 3D printed microwave absorbers
查看参考文献67篇
|
文摘
|
近年来,随着3D打印技术逐渐成熟化与商业化,这种新兴制造技术开始应用于吸波材料的设计与制备中。本工作从3D打印频率选择表面类和超材料类吸波材料、3D打印蜂窝类吸波材料、3D打印陶瓷类吸波材料和3D打印其他吸波材料等几个方面综述了3D打印技术在微波吸收材料制备方面的研究进展,对3D打印技术在微波吸收材料制造中存在的打印材料局限性、材料力学性能缺乏、微观结构的测试分析等问题进行了阐述,同时对3D打印技术在微波吸收材料制造领域未来的发展趋势,如小型化、多功能、智能化也进行了展望。 |
|
其他语种文摘
|
In recent years, as the 3D printing technology growing maturity and commercialization, the researchers have attempted to apply this emerging manufacturing technology to the design and fabrication of wave-absorbing materials. In this paper, the recent progress of 3D printing technology in fabrication of microwave absorbing materials, including 3D printing FSS and metamaterial absorbing materials, 3D printing honeycomb absorbing materials, 3D printing ceramics and other 3D printing microwave absorbing materials are reviewed. Furthermore, the limitations of 3D printing materials, the lack of mechanical properties of materials, the problems of testing and analysis of microstructure of 3D printing technology in microwave absorption materials manufacturing are also systematically expounded, at the same time, the future developing trend of 3D printing technology in the manufacturing field of microwave absorption materials, such as miniaturization, multi-function and intelligent is also prospected. |
|
来源
|
航空材料学报
,2021,41(6):13-22 【核心库】
|
|
DOI
|
10.11868/j.issn.1005-5053.2020.000151
|
|
关键词
|
3D打印
;
微波吸收
;
超材料
;
吸波蜂窝
;
陶瓷基吸波材料
|
|
地址
|
1.
中国航发北京航空材料研究院, 北京, 100095
2.
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1005-5053 |
|
文献收藏号
|
CSCD:7111398
|
参考文献 共
67
共4页
|
|
1.
Li M. An ultrathin and broadband radar absorber using resistive FSS.
IEEE Antennas & Wireless Propagation Letters,2012,11:748-751
|
被引
12
次
|
|
|
|
|
2.
Jiansheng X U. Research progress on radar stealth technique and radar absorbing materials.
Materials Review,2014,9:46-49
|
被引
1
次
|
|
|
|
|
3.
孔静. 电磁屏蔽机理及轻质宽频吸波材料的研究进展.
材料导报,2020,34(9):9055-9063
|
被引
10
次
|
|
|
|
|
4.
Wang B X. A novel dualband terahertz metamaterial absorber for a sensor application.
Journal of Applied Physics,2015,117(1):2075-2080
|
被引
1
次
|
|
|
|
|
5.
Li Y. Plasmonic induced tripleband absorber for sensor application.
Optics Express,2015,23(13):17607-17612
|
被引
1
次
|
|
|
|
|
6.
Sugimoto S. Mtype ferrite composite as a microwave absorber with wide bandwidth in the GHz range.
IEEE Transactions on Magnetics,1999,35(5):3154-3156
|
被引
23
次
|
|
|
|
|
7.
Wang L. A facile one-pot method to synthesize a three-dimensional graphene@carbon nanotube composite as a high-efficiency microwave absorber.
Physical Chemistry Chemical Physics,2015,17(3):2228-2234
|
被引
7
次
|
|
|
|
|
8.
Liu L. Microwave absorption properties of a wave-absorbing coating employing carbonyl-iron powder and carbon black.
Applied Surface Ence,2010,257(3):842-846
|
被引
1
次
|
|
|
|
|
9.
Fante R L. Reflection properties of the salisbury screen.
IEEE Transactions on Antennas & Propagation,1988,36(10):1443-1454
|
被引
34
次
|
|
|
|
|
10.
Du T L J. Design of Jauman absorbers.
IEEE Antennas & Propagation Magazine,1994,36(6):17-25
|
被引
1
次
|
|
|
|
|
11.
Azemi S N. Development and analysis of 3D frequency selective surfaces.
Proceedings of the Asia-Pacific Microwave Conference 2011 (APMC),2012:693-696
|
被引
1
次
|
|
|
|
|
12.
Chen H Y. Design of an ultra-thin magnetic-type radar absorber embedded eith FSS.
IEEE Antennas & Wireless Propagation Letters,2010,9:899-901
|
被引
10
次
|
|
|
|
|
13.
Landy N I. Perfect metamaterial absorber.
Physical Review Letters,2008,100(20):207402
|
被引
467
次
|
|
|
|
|
14.
Yin X. Ultra-wideband microwave absorber by connecting multiple absorption bands of two different-sized hyperbolic metamaterial waveguide arrays.
Scientific Reports,2015,5(1):15367-15375
|
被引
2
次
|
|
|
|
|
15.
Ding F. Ultra-broadband microwave metamaterial absorber.
Applied Physics Letters,2012,100(10):103501-103506
|
被引
1
次
|
|
|
|
|
16.
Calignano F. Overview on additive manufacturing technologies.
Proceedings of the IEEE,2017,105(4):593-612
|
被引
12
次
|
|
|
|
|
17.
Berman B. 3-D printing: the new industrial revolution.
Business Horizons,2012,55(2):155-162
|
被引
59
次
|
|
|
|
|
18.
Chen Z. 3D printing of ceramics: a review.
Journal of The European Ceramic Society,2019,39(4):661-687
|
被引
36
次
|
|
|
|
|
19.
Ligon S C. Polymers for 3D printing and customized additive manufacturing.
Chemical Reviews,2017,117(15):10212-10290
|
被引
75
次
|
|
|
|
|
20.
Ngo T. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges.
Composites Part B,2018,143:172-196
|
被引
180
次
|
|
|
|
|
了解气象卫星更多信息，请访问