高超声速喷管设计理论与方法
A review of theories and methods for hypersonic nozzle design
查看参考文献89篇
文摘
|
在高超声速飞行技术领域,特别是涉及到高焓气体流动的研究,高超声速风洞试验仍然是目前最可靠的研究手段.风洞流场的品质是高超声速风洞研发最重要的一项性能指标,其取决于喷管设计采用的理论与方法,也是风洞设计最关注的一项核心技术.针对二维轴对称型面喷管设计,本文首先综述了传统高超声速喷管设计的主要理论和常用方法,它们在高超声速喷管设计中曾经发挥了重要作用,包括理论方法,近似方法和基于两者的修正方法.然后,考虑高温气体效应,分析了高焓喷管设计时面临的困难与问题,从流动介质物性变化、高温边界层发展和非平衡过程效应三方面,综述了国内外在高超声速高焓喷管设计方面的研究进展.最后,对于高焓喷管的设计理论和方法的发展作了展望,期望对于推动我国高超声速高焓喷管设计技术的发展提供一些有意义的启示. |
其他语种文摘
|
In the field of hypersonic flight technology, especially the study of high-enthalpy flows, the hypersonic wind tunnel test, at present, is still the most reliable and convenient research method. For the development of hypersonic wind tunnels, one of the most important performance indicators is the uniform flow quality, which depends on the theories and methods of hypersonic nozzle design, and is the core technique of wind tunnel design. For the design of a two-dimensional axisymmetric contour nozzle, this paper first reviews the main theories and traditional design methods that have played an important role in the design of hypersonic nozzles, including the theoretical methods, the approximate methods, and the correction methods for both. Then, due to the high-temperature gas effects, the difficulties and problems faced in the design of high-enthalpy nozzles are analyzed in detail. In terms of the changes in the physical properties of the test gases, the development of high-temperature boundary-layer, and the effects of non-equilibrium processes, this paper also reviews the domestic and foreign research progresses in the design of hypersonic and high-enthalpy nozzles. Finally, the development of theory and method for designing the high-enthalpy nozzle is prospected, and we expect it to promote the development of hypersonic nozzle design technology in China. |
来源
|
力学进展
,2021,51(2):257-294 【核心库】
|
DOI
|
10.6052/1000-0992-20-002
|
关键词
|
高超声速
;
高焓气体
;
激波风洞
;
喷管设计
;
真实气体效应
|
地址
|
中国科学院力学研究所, 高温气体动力学国家重点实验室, 北京, 100190
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1000-0992 |
学科
|
航空 |
基金
|
国家自然科学基金
|
文献收藏号
|
CSCD:7015369
|
参考文献 共
89
共5页
|
1.
胡振震. 基于轴线马赫数分布的喷管扩张段无粘型面设计.
实验流体力学,2016,30:97-104
|
被引
3
次
|
|
|
|
2.
姜宗林. 长试验时间爆轰驱动激波风洞技术研究.
力学学报,2012,44:824-831
|
被引
34
次
|
|
|
|
3.
罗长童.
一种高焓风洞喷管型线的光滑化定型方法.专利号: 2018115040917,2019
|
被引
1
次
|
|
|
|
4.
孙启志.
Φ1米高超声速风洞M7, 8喷管设计及流场校测.[硕士论文],2005
|
被引
1
次
|
|
|
|
5.
唐蓓. 大尺度高焓激波风洞喷管设计研究.
中国科学:物理学力学天文学,2019,49:074701
|
被引
1
次
|
|
|
|
6.
伍荣林.
风洞设计原理,1985
|
被引
72
次
|
|
|
|
7.
徐立功. 自由活塞激波风洞.
力学进展,1992,22:324-331
|
被引
2
次
|
|
|
|
8.
童秉纲.
气体动力学,1990
|
被引
50
次
|
|
|
|
9.
易仕和.
超声速与高超声速喷管设计,2013
|
被引
20
次
|
|
|
|
10.
张涵信. 2020年中国空气动力学发展研究.2020年中国科学和技术发展研究(下).
2020年中国科学和技术发展研究暨科学家讨论会,2004
|
被引
1
次
|
|
|
|
11.
张敏莉. 超声速短化喷管的设计与实验研究.
空气动力学学报,2007,25:500-503
|
被引
6
次
|
|
|
|
12.
赵一龙. 超声速型面可控喷管设计方法.
国防科技大学学报,2012,34:1-4
|
被引
8
次
|
|
|
|
13.
Ali M H. Numerical solution for the design of minimum length supersonic nozzle.
ARPN Journal of Engineering and Applied Sciences,2012,7:605-612
|
被引
2
次
|
|
|
|
14.
Anderson J D Jr. A true-dependent analysis for vibrational and chemical nonequilibrium nozzle flows.
AIAA Journal,1970,8:545-550
|
被引
1
次
|
|
|
|
15.
Anderson J D Jr. Time-dependent solutions of nonequilibrium nozzle flows-a sequel.
AIAA Journal,1970,8:2280-2282
|
被引
2
次
|
|
|
|
16.
Anderson J D Jr.
Modern Compressible Flow: With Historical Perspective. 3rd ed,2003
|
被引
1
次
|
|
|
|
17.
Anderson J D Jr.
Hypersonic and High-temperature Gas Dynamic. 2nd ed,2006
|
被引
1
次
|
|
|
|
18.
Armstrong A H.
Two-dimensional supersonic: Nozzle design, part I: Theory, Armament Research Establishment. Report No. 5/51,1951
|
被引
1
次
|
|
|
|
19.
Beckwith I E.
An accurate and rapid method for the design of supersonic nozzles. NACA TN 3322,1995
|
被引
1
次
|
|
|
|
20.
Benton J.
Design and Navier-Stokes analysis of hypersonic wind tunnel nozzles. [Master Thesis],1989
|
被引
1
次
|
|
|
|
|