WFeNiMo高熵合金动态力学行为及侵彻性能研究
DYNAMIC MECHANICAL BEHAVIOR AND PENETRATION PERFORMANCE OF WFeNiMo HIGH-ENTROPY ALLOY
查看参考文献33篇
|
文摘
|
为了探究不同应变速率下WFeNiMo高熵合金的变形行为和侵彻性能,采用万能材料试验机、分离式霍普金森压杆开展了高熵合金的静动态力学性能试验,讨论了其在不同应变速率下变形特征微观机制.基于弹道枪试验平台开展了高熵合金与典型钨合金(93W-4.9Ni-2.1Fe,wt%)破片对有限厚钢靶侵彻作用性能试验研究,分析了两种合金破片侵彻作用过程与靶板破坏特征、侵彻穿孔能量消耗与撞击速度间的关系.结果表明:高熵合金、钨合金材料屈服强度与应变率呈正相关,且在相同的应变率下高熵合金具有更高的屈服强度;随着应变率的提高,高熵合金由脆性断裂、韧脆混合的准解理断裂发展至具有黏着特性的破碎变形模式;高熵合金具有较强的局部绝热变形能力,在侵彻薄钢靶时体现出较高的剪切敏感性;相同撞击速度下,高熵合金破片穿靶消耗的能量低于钨合金破片,对于薄钢靶具有更强的侵彻穿透能力.高熵合金具有优异的力学性能和侵彻能力,在高速撞击薄靶板时除了传统的剪切冲塞作用还具有一定的能量释放特性,在预制破片上有较好的应用前景. |
|
其他语种文摘
|
In order to investigate the deformation behavior and penetration performance of WFeNiMo high-entropy alloy under different strain rates,the static mechanical properties of the high-entropy alloy was tested by universal material testing machine and the dynamic mechanical properties of the high-entropy alloy was tested by the SHPB (split Hopkinson pressure bar).The micro mechanism of deformation characteristics of the alloy under different strain rates was also discussed.Based on the ballistic gun test platform,the fragments penetration performance of the high-entropy alloy and the typical tungsten alloy (93W-4.9Ni-2.1Fe,wt%) to the finite thickness steel target was studied.The relationship between the penetration process of the two kinds of alloy fragments and the target damage characteristics,the energy consumption of penetration and the impact velocity was analyzed.The results show that the yield strength and strain rate of the high-entropy alloy and tungsten alloy present a positively correlation.The yield strength of the high-entropy alloy is higher than the tungsten alloy under the same strain rate.With the increase of strain rate of deformation,the high-entropy alloy develops from the brittle fracture,quasi-cleavage with the mixing of tough and brittle characters to the fracture deformation mode with adhesive characteristics.The high-entropy alloy has a strong local adiabatic deformation ability and high shear sensitivity when the fragments penetrate into the thin steel targets.The energy consumption of the high-entropy alloy fragments penetrating into the target is lower than the tungsten alloy fragments under the same impact velocity.The high–entropy alloy has excellent mechanical properties and superior performance in the penetration ability.In addition to the traditional shear plug effect,there is a certain energy release characteristic when the thin target is impacted at high speed by the high-entropy alloy fragments and it has a good application prospect in the field of the preformed fragments. |
|
来源
|
力学学报
,2020,52(5):1443-1453 【核心库】
|
|
DOI
|
10.6052/0459-1879-20-166
|
|
关键词
|
高熵合金
;
力学性能
;
高速撞击
;
微观变形
;
能量消耗
|
|
地址
|
1.
南京理工大学机械工程学院, 南京, 210094
2.
中国科学院力学研究所, 非线性力学国家重点实验室, 北京, 100190
3.
中国科学院大学工程科学学院, 北京, 100049
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0459-1879 |
|
学科
|
力学 |
|
基金
|
国家自然科学基金
;
超高速碰撞研究中心开放基金
;
江苏省研究生科研创新计划
|
|
文献收藏号
|
CSCD:6829059
|
参考文献 共
33
共2页
|
|
1.
Yeh J W. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes.
Advanced Engineering Materials,2004,6(5):299-303
|
被引
1091
次
|
|
|
|
|
2.
Miao J. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy.
Acta Materialia,2017,132:35-48
|
被引
36
次
|
|
|
|
|
3.
Senkov O N. Refractory high-entropy alloys.
Intermetallics,2010,18(9):1758-1765
|
被引
191
次
|
|
|
|
|
4.
Otto F. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy.
Acta Materialia,2013,61(15):5743-5755
|
被引
197
次
|
|
|
|
|
5.
Senkov O N. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys.
Intermetallics,2011,19(5):698-706
|
被引
236
次
|
|
|
|
|
6.
杨铭. 高熵非晶合金研究进展.
中国科学:物理学力学天文学,2020,50(6):067003
|
被引
6
次
|
|
|
|
|
7.
温晓灿. 高熵合金中的第二相强韧化.
中国材料进展,2019,38(3):242-250
|
被引
8
次
|
|
|
|
|
8.
张蔚冉. 高熵合金材料研究进展.
中国科学:材料科学,2018,61(1):2-22
|
被引
2
次
|
|
|
|
|
9.
张勇. 大块金属玻璃及高熵合金的合金化作用.
中国科学(G辑:物理学力学天文学),2008(4):439-448
|
被引
6
次
|
|
|
|
|
10.
吕昭平. 高熵合金的变形行为及强韧化.
金属学报,2018,54(11):1553-1566
|
被引
53
次
|
|
|
|
|
11.
李建国. 高熵合金的力学性能及变形行为研究进展.
力学学报,2020,52(2):333-359
|
被引
25
次
|
|
|
|
|
12.
Liu X F. "Self-sharpening" tungsten high-entropy alloy.
Acta Materialia,2020,186:257-266
|
被引
30
次
|
|
|
|
|
13.
Zhang Z R. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa 0.53.
Materials & Design,2017,133:435-443
|
被引
12
次
|
|
|
|
|
14.
张先锋.
终点效应学,2017:2-3
|
被引
1
次
|
|
|
|
|
15.
米双山. 钨球侵彻LY-12铝合金靶板的有限元分析.
爆炸与冲击,2005(5):95-98
|
被引
4
次
|
|
|
|
|
16.
徐豫新. 钨合金球形破片对低碳钢的穿甲极限.
振动与冲击,2011,30(5):192-195
|
被引
13
次
|
|
|
|
|
17.
谈梦婷. 装甲陶瓷的界面击溃效应.
力学进展,2019,49:201905
|
被引
3
次
|
|
|
|
|
18.
杨益. 高密度活性材料及其毁伤效应进展研究.
兵器材料科学与工程,2013(4):85-89
|
被引
1
次
|
|
|
|
|
19.
熊玮. 冷轧成型Al/Ni多层复合材料力学行为与冲击释能特性研究.
爆炸与冲击,2019,39(5):130-138
|
被引
4
次
|
|
|
|
|
20.
Xiong W. The shock-induced chemical reaction behaviour of Al/Ni composites by cold rolling and powder compaction.
Journal of Materials Science,2019,54(8):6651-6667
|
被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问