Ti-6Al-4V电弧熔丝增材辊轧复合制造的有限元模拟
Finite Element Simulation of Hybrid Manufacturing of Ti-6Al-4V by Wire Arc Additive Manufacturing and Rolling
查看参考文献19篇
文摘
|
增材制造过程中在凝固、冷却阶段因骤热骤冷而易于产生较大的残余应力,进而影响部件的成形和使用。在增材过程中引入辊轧工序,可望改变局部应力状态并降低宏观残余应力,进而改善部件宏观变形和微观组织形态。通过建立Ti-6Al-4V钛合金电弧熔丝增材与层间辊轧复合成形过程的有限元模型,研究在圆柱形轧辊条件下,不同压下量对部件温度、应力、应变及残余应力分布的影响规律。结果表明,层间辊轧可显著降低沉积层金属中的残余应力;同时降低对基板的整体应力。采用圆柱形轧辊并增加压下量可显著降低残余应力,为复合增材工艺的优化指明了方向。 |
其他语种文摘
|
In wire arc additive manufacturing (WAAM),residual stress is easily generated during solidification and subsequent cooling,which affects the formation and use of the components.In this paper,finite element simulations were carried out to investigate the influence of roller reductions on the temperature,stress,strain and residual stress distribution in components during the hybrid forming of Ti-6Al-4V alloy by WAAM and interlayer rolling.The results show that interlayer rolling reduces the residual macroscopic stress significantly in the deposited metal,and at the same time reduces the overall stress on the substrate.Increasing reduction can reduce significantly the macroscopic residual stresses and distorsion of the components.The residual stress can be significantly reduced by profiled roller and increasing rolling reduction,which leads to a new route for the optimization of process in wire arc additive manufacturing. |
来源
|
稀有金属材料与工程
,2020,49(3):878-882 【核心库】
|
关键词
|
增材制造
;
辊轧
;
残余应力
;
有限元模拟
|
地址
|
1.
中国科学院金属研究所, 辽宁, 沈阳, 110016
2.
中国科学技术大学, 辽宁, 沈阳, 110016
3.
中国航空制造技术研究院, 北京, 100024
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1002-185X |
学科
|
金属学与金属工艺 |
基金
|
国家重点研发计划项目
|
文献收藏号
|
CSCD:6687995
|
参考文献 共
19
共1页
|
1.
李福泉. TC4表面丝粉同步激光熔覆制备复合材料层的微观组织和性能.
稀有金属材料与工程,2017,46(1):177
|
被引
10
次
|
|
|
|
2.
Wu B T.
Journal of Manufacturing Processes,2018,35:127
|
被引
30
次
|
|
|
|
3.
Bai J Y.
Journal of Materials Engineering and Performance,2017,26(4):1808
|
被引
13
次
|
|
|
|
4.
Li R.
Journal of Manufacturing Processes,2019,40:59
|
被引
5
次
|
|
|
|
5.
Baufeld B.
Science and Technology of Materials,2009,100:1536
|
被引
1
次
|
|
|
|
6.
Wang Z.
Materials,2017,10(10):1
|
被引
1
次
|
|
|
|
7.
Donoghue J.
Materials Characterization,2016,114:103
|
被引
25
次
|
|
|
|
8.
Cunningham C R.
Additive Manufacturing,2018,22:672
|
被引
31
次
|
|
|
|
9.
Zhang H.
Rapid Prototyping Journal,2013,19(6):387
|
被引
12
次
|
|
|
|
10.
Fu Y.
Journal of Materials Processing Technology,2017,250:220
|
被引
2
次
|
|
|
|
11.
单飞虎.
中国专利. CN108384938B9090,2020
|
被引
1
次
|
|
|
|
12.
Colegrove P A.
Advanced Materials Research,2014,996:694
|
被引
2
次
|
|
|
|
13.
Coules H E.
Science and Technology of Welding and Joining,2012,17(5):394
|
被引
1
次
|
|
|
|
14.
Fachinotti V D.
International Journal for Numerical Methods in Biomedical Engineering,2011,27(4):595
|
被引
4
次
|
|
|
|
15.
Wu B.
Journal of Materials Processing Technology,2017,250:304
|
被引
9
次
|
|
|
|
16.
Liu J.
International Journal of Advanced Manufacturing Technology,2014,69:1097
|
被引
1
次
|
|
|
|
17.
Martina F.
Metallurgical and Materials Transactions A,2015,46:6103
|
被引
13
次
|
|
|
|
18.
Honnige J R.
Additive Manufacturing,2018,22:775
|
被引
8
次
|
|
|
|
19.
Honnige J R.
Materials and Design,2018,150:193
|
被引
6
次
|
|
|
|
|