帮助 关于我们

返回检索结果

激光沉积TC4/TC11梯度材料组织与疲劳性能研究
Microstructure and Fatigue Properties of TC4/TC11 Gradient Materials by Laser Deposition

查看参考文献18篇

何波 1   雷涛 1   孙长青 2   杨光 1,3 *  
文摘 为了研究激光沉积TC4/TC11钛合金梯度材料的组织与疲劳性能,采用激光沉积制造技术制备两种不同过渡方式的TC4/TC11复合材料。观察不同过渡方式复合材料的显微组织,测试两种复合材料分别在550和800 MPa下的疲劳性能,并对疲劳断口进行分析。结果表明,相比直接过渡的复合材料,具有3层过渡层梯度材料的显微组织过渡界面不明显,过渡区组织结合紧密;具有3层过渡层的梯度材料在两种应力下的疲劳寿命均比直接过渡的高,低应力下相对提高了129.3%,高应力下相对提高了81.8%;直接过渡复合材料在裂纹扩展时沿着α片层集束开裂,滑移面较大,疲劳寿命较低;具有3层过渡层的梯度材料,裂纹扩展沿着单个α片层滑移开裂,滑移面小,裂纹扩展路径比较曲折,疲劳寿命高。
其他语种文摘 In order to study the microstructure and fatigue properties of laser deposited TC4/TC11 gradient materials,directly transited and gradiently transited TC4/TC11 composite materials were prepared by laser deposition manufacturing technology.The microstructures of composite materials by different transition were observed,the fatigue properties of these two composite materials under stresses of 550 MPa and 800 MPa were tested,and fatigue fractures were analyzed.The results show that the interface of the microstructure of the gradient material with 3 transition layers is not obvious,and microstructures of TC4 and TC11 are integrated more tightly in the transition zone than that of the directly transition composite materials.The fatigue life of the gradient material with 3 transition layers under either stress is higher than that of the direct transition,which is relatively increased by 129.3% under low stress and 81.8% under high stress.The direct transition composite material cracks along the bunch of α-sheet during crack propagation,with a large sliding surface and a short fatigue life.The cracks of gradient material with 3 transition layers grow along a single α-sheet,the slip plane is small,and the crack propagation path is more tortuous,which prolongs the fatigue life.
来源 稀有金属材料与工程 ,2019,48(9):3048-3054 【核心库】
关键词 激光沉积制造 ; 钛合金 ; 梯度材料 ; 显微组织 ; 疲劳性能
地址

1. 沈阳航空航天大学, 辽宁, 沈阳, 110136  

2. 沈阳工程学院, 辽宁, 沈阳, 110136  

3. 航空制造工艺数字化国防重点学科实验室, 航空制造工艺数字化国防重点学科实验室, 辽宁, 沈阳, 110136

语种 中文
文献类型 研究性论文
ISSN 1002-185X
学科 金属学与金属工艺
基金 国家重点研发计划项目 ;  国家工业和信息化部项目 ;  辽宁省教育厅科学研究计划项目 ;  航空制造工艺数字化国防重点学科实验室开放基金
文献收藏号 CSCD:6574817

参考文献 共 18 共1页

1.  李永. 钛基梯度功能材料的复合结构研究进展. 稀有金属材料与工程,2005,34(5):178 被引 4    
2.  张永忠. 航空制造技术,2015(10):44 被引 6    
3.  Noor A K. Computers and Structures,2000,74(5):507 被引 14    
4.  Anonymous. Manufacturing Engineering,2008,140(2):39 被引 1    
5.  王华明. 中国激光,2009,36:3205 被引 5    
6.  Arcella Frank G. JOM,2000,52(5):28 被引 52    
7.  Xue L J. Chinese Journal of Lasers,2009,36:3179 被引 3    
8.  张永忠. 航空制造技术,2010(8):47 被引 6    
9.  Huan Qi. The International Journal of Advanced Manufacturing Technology,2010,48:121 被引 2    
10.  Maawad E. Materials Science & Engineering A,2012,536:82 被引 26    
11.  Boyer R. Materials Properties Handbook: Titanium Alloys,1994:3 被引 1    
12.  Msaawad E. Materials Science and Engineering A,2012,536:82 被引 26    
13.  薛蕾. 激光快速修复Ti-6A1-4V合金的显微组织与力学性能. 稀有金属材料与工程,2007,36(6):989 被引 26    
14.  张凌云. 科技创新导报,2016(13):177 被引 4    
15.  高镇同. 疲劳性能试验设计和数据处理 被引 1    
16.  颜鸣皋. 工程材料实用手册(第2版),2002:104 被引 2    
17.  贺瑞军. 激光沉积Ti-6Al-2Zr-Mo-V钛合金高周疲劳性能. 航空学报,2010,31(7):1488 被引 13    
18.  杨光. 稀有金属,2018,42(11):272 被引 1    
引证文献 3

1 谢乐春 激光熔化沉积钛合金及其复合材料组织力学性能研究进展 航空制造技术,2022,65(1/2):49-66
被引 2

2 方艳 激光熔化沉积60wt%不同粒径WC复合NiCu合金耐磨性及电化学腐蚀性能 复合材料学报,2022,39(7):3498-3509
被引 3

显示所有3篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号