帮助 关于我们

返回检索结果

热处理对激光沉积TC4组织和性能的影响
Effect of Heat Treatment on Microstructure and Properties of Laser Deposition TC4

查看参考文献17篇

何波 1   邢盟 1   孙长青 2   杨光 1,3 *  
文摘 通过对激光沉积TC4钛合金沉积态和热处理态的显微组织、静载力学性能及显微硬度进行对比研究,探索改善激光沉积TC4钛合金组织,进而提高综合力学性能的途径。结果表明,沉积态试样在970 ℃热处理后初始连续的晶界α相已经彻底破碎;随着固溶时间的延长,球状α相进一步长大且增多,α板条充分生长且显著增大;在970 ℃固溶2 h后再进行时效热处理后,组织是一种由等轴α,网篮α和转变β相构成的双/三态组织,综合性能最好。与沉积态和退火态相比,固溶时效处理后的试样(双/三态组织),耐磨性最好;且由于组织中的等轴组织起着变形协调的作用,网篮组织可以降低位错的塞积作用进而提高塑性,使得塑性有很大的提高且强度又降低不多,综合力学性能得到显著的提高。激光沉积制造TC4钛合金的沉积态、退火态、固溶时效态和固溶态(固溶温度相同)的显微硬度依次升高,但是当固溶温度进一步提高至相变点以上进行热处理时,由于再结晶后的晶内组织发生了重排,试样的显微硬度将会明显下降。
其他语种文摘 By comparing the microstructures,static mechanical properties and microhardness of laser deposition TC4 alloy in the as-deposited and heat-treated states,the approaches to perfect the microstructure of laser deposition TC4 alloy were explored.Results show that after the as-deposited sample undergoes 970 °C heat treatment,the grain boundary α is thoroughly broken which is continuous initially;with the extension of solution time,globular α phases are more and bigger,and their laths are in full growth and increase dramatically;2 h later,when the sample undergoes aging treatment,its structure turns to be constituted by equiaxed α,basketweave α and transformed β phase,which results in the optimized textural parameters.Compared with that of as-deposited and annealed samples,the plasticity of the solution aging sample is enhanced significantly and the strength is decreased slightly,and their integrated mechanical properties improve remarkably.Its equiaxed structure performs coordinating function and its basketweave structure can reduce the dislocation pile-up to improve the plasticity.The microhardness is gradually increased in the laser deposition TC4 alloy in the order of the as-deposited,as-annealed,as-solution aged and as solid-solution treated.But when the solution temperature rises to the transformation point,the microstructure of the sample rearranges after crystallizing,leading to marked decline in microhardness.
来源 稀有金属材料与工程 ,2019,48(9):3007-3014 【核心库】
关键词 激光沉积制造 ; TC4钛合金 ; 热处理 ; 显微组织 ; 性能
地址

1. 沈阳航空航天大学, 辽宁, 沈阳, 110136  

2. 沈阳工程学院, 辽宁, 沈阳, 110136  

3. 航空制造工艺数字化国防重点学科实验室, 航空制造工艺数字化国防重点学科实验室, 辽宁, 沈阳, 110136

语种 中文
文献类型 研究性论文
ISSN 1002-185X
学科 金属学与金属工艺
基金 国家重点研发计划项目 ;  国家工业和信息化部项目 ;  国家自然科学基金项目 ;  辽宁省教育厅科学研究计划项目 ;  航空制造工艺数字化国防重点学科实验室开放基金
文献收藏号 CSCD:6574811

参考文献 共 17 共1页

1.  陈舒枢. 高科技与产业化,2016(1):90 被引 1    
2.  钦兰云. 稀有金属,2017,38(6):17050047 被引 1    
3.  薛蕾. 激光快速修复Ti-6A1-4V合金的显微组织与力学性能. 稀有金属材料与工程,2007,36(6):989 被引 26    
4.  谢旭霞. 退火温度对激光熔化沉积TA15钛合金组织和性能的影响. 稀有金属材料与工程,2008,37(9):1510 被引 19    
5.  刘继雄. 热等静压处理后TC4钛合金中等轴α相特征及其对拉伸性能的影响. 机械工程材料,2015,39(5):10 被引 4    
6.  包淑娟. 钛工业进展,2012,29(4):20 被引 3    
7.  Srinivasu G. Materials and Design,2013,47(47):323 被引 21    
8.  Niinomi M. Materials Science & Engineering A,1986,100(4):45 被引 1    
9.  Donachie M J. Understanding Ti’s Metallurgy, in Titanium: A Technical Guide, 2 ed,2000:21 被引 1    
10.  杨光. 成形气氛中氧含量对激光沉积TA15钛合金组织及力学性能的影响. 稀有金属材料与工程,2017,46(6):1650 被引 5    
11.  Gil F J. Journal of Alloys and Compounds,2001,392(1/2):142 被引 23    
12.  辛社伟. 钛工业进展,2008,25(3):26 被引 7    
13.  辛社伟. 关于钛合金热处理和析出相的讨论. 金属热处理,2006,31(9):39 被引 40    
14.  肖振楠. 中国激光,2017,44(9):81 被引 5    
15.  李文贤. 粉末冶金材料科学与工程,2011,16(3):464 被引 1    
16.  张霜银. 热处理对激光成形TC4合金组织及性能的影响. 稀有金属材料与工程,2007,36(7):1263 被引 38    
17.  李静. 中国激光,2014,41(11):103 被引 6    
引证文献 3

1 王普强 热处理对LMD TC4组织、力学性能及各向异性的影响 中国激光,2021,48(10):1002116
被引 0 次

2 刘顺 高强耐腐蚀Ti80合金的热变形行为及热轧板材的组织性能研究 稀有金属材料与工程,2021,50(9):3203-3212
被引 2

显示所有3篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号