帮助 关于我们

返回检索结果

体心立方金属铌中小角度晶界分解的原位电子显微学表征
Study on the elimination of low-angle grain boundaries in body-centered cubic niobium

查看参考文献16篇

江彬彬 1,2   杜奎 1 *   叶恒强 1  
文摘 本文利用像差校正透射电子显微镜研究了体心立方金属铌中的小角度晶界,并结合原位拉伸实验技术对其在拉伸加载过程中的变形行为进行观察。结果表明,在铌金属中的小角度晶界为非对称倾转晶界,由1/2 [111]和1/2[111]两种类型的全位错构成。加载过程中该小角度晶界上的位错向外滑移,并最终导致了小角度晶界的分解消失。
其他语种文摘 Low-angle grain boundaries in the body-centered cubic structured Nb and the elimination of these grain boundaries were investigated by using in situ aberration-corrected electron microscopy. It is found that these grain boundaries are asymmetrical tilt lowangle grain boundaries,which consist of 1/2[111]and 1/2[111]dislocations. The elimination of low-angle grain boundaries can take place due to the glide of these dislocations away from the boundaries under tensile loading.
来源 电子显微学报 ,2019,38(2):102-106 【扩展库】
DOI 10.3969/j.issn.1000-6281.2019.02.002
关键词 小角度晶界 ; 体心立方金属 ; 原位电子显微学 ; 像差校正透射电子显微学
地址

1. 中国科学院金属研究所, 沈阳材料科学国家(联合)实验室, 辽宁, 沈阳, 110016  

2. 中国科学院大学, 北京, 100049

语种 中文
文献类型 研究性论文
ISSN 1000-6281
学科 晶体学;金属学与金属工艺
基金 国家自然科学基金资助项目
文献收藏号 CSCD:6495508

参考文献 共 16 共1页

1.  Mcmahon C J. Initiation of cleavage in polycrystalline iron. Acta Materialia,1965,13(6):591-594 被引 1    
2.  Tweed J H. Micromechanisms of failure in C-Mn weld metals. Acta Materialia,1987,35(7):1401-1414 被引 3    
3.  符立波. 原子尺度分辨的晶界力学行为TEM原位研究. 电子显微学报,2018,37(5):397-407 被引 11    
4.  刘智强. 冷轧变形Al-Cu合金再结晶Σ3晶界研究. 电子显微学报,2018,37(3):232-237 被引 7    
5.  Argon A S. Cleavage cracking resistance of large-angle grain boundaries in Fe-3 wt% Si alloy. Philosophical Magazine A,2002,82(17):3333-3347 被引 1    
6.  Qiao Y. Cleavage crack-growthresistance of grain boundaries in polycrystalline Fe-2% Si alloy: experiments and modeling. Mechanics of Materials,2003,35(1):129-154 被引 11    
7.  Jiang B B. Direct observation of deformation twinning under stress gradient in body-centered cubic metals. Acta Materialia,2018,155(15):56-68 被引 8    
8.  Basha D A. Crack propagation along grain boundaries and twins in Mg and Mg-0. 3 at.% Y alloy during in-situ straining in transmission electron microscope. Scripta Materialia,2018,142(1):50-54 被引 2    
9.  Lu N. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper. Nature Communications,2015,6:7648-7654 被引 10    
10.  Lu Y Z. Anisotropy of high temperature creep properties of a Co-base single crystal superalloy. Materials Science and Engineering A,2018,720:69-74 被引 3    
11.  余永宁. 金属学原理. (第2版),2013:390-394 被引 1    
12.  Sauzay M. Cyclically induced softening due to low-angle boundary annihilation in a martensitic steel. Materials Science and Engineering A,2005,400:241-244 被引 3    
13.  Bobylev S V. Transformations of grain boundaries in deformed nanocrystalline materials. Acta Materialia,2004,52(13):3793-3805 被引 8    
14.  Terentyev D. Blunting of abrittle crack at grain boundaries: an atomistic study in BCC iron. Materials Science and Engineering A,2013,576:231-238 被引 3    
15.  Zhang X. Cold drawing and annealing textures of tantalum wires. Transactions of Nonferrous Metals Society of China,1999,9:774-778 被引 1    
16.  Vitek V. Structure of tilt grain boundaries in bcc metals. Philosophical Magazine A,1980,41(5):649-663 被引 1    
引证文献 4

1 胡远啸 CrMnFeCoNi高熵合金纳米晶温度相关的拉伸行为研究 固体力学学报,2020,41(2):109-117
被引 3

2 杨成鹏 应变对面心立方结构孪晶纳米线变形机制影响的原位原子尺度研究 电子显微学报,2020,39(5):476-486
被引 2

显示所有4篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号