文摘
|
大气主要温室气体检测仪采用HgCdTe探测器实现CO_2温室气体干涉光谱数据探测,HgCdTe探测器工作温度对探测器性能具有重要影响。针对HgCdTe探测器恒定低温下工作的需求,设计了温度采集电路与温控功率驱动电路,并以Actel公司反熔丝工艺FPGA作为主控单元,结合PID算法,完成了星载HgCdTe探测器温控系统,实现了探测器在轨温度控制。实验及应用结果表明,控温精度优于±0.5 ℃,控温稳定性优于±0.1 ℃/s,满足HgCdTe探测器在轨工作温度要求. |
其他语种文摘
|
HgCdTe detector was used to detect the interference spectra of CO_2 greenhouse gases on spaceborne greenhouse gas detection equipment.The performance of HgCdTe detector is significantly affected by operating temperature,and the detector needs to work at a constant low temperature.According to the operating temperature requirement,a temperature control system for spaceborne HgCdTe detector was designed.The system is mainly composed of temperature acquisition circuit,power-driven circuit and a main control unit based on FPGA.PID algorithm was adopted to realize precise temperature control.The experiment and application results show that the temperature control precision is better than ±0.5 ℃,and the temperature stability is better than ±0.1 ℃/s,which satisfies the on-orbit working temperature requirement of HgCdTe detector. |
来源
|
大气与环境光学学报
,2019,14(2):89-96 【核心库】
|
DOI
|
10.3969/j.issn.1673-6141.2019.02.002
|
关键词
|
HgCdTe探测器
;
温度控制
;
FPGA
;
PID算法
|
地址
|
中国科学院安徽光学精密机械研究所, 中国科学院通用光学定标与表征技术重点实验室, 安徽, 合肥, 230031
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1673-6141 |
学科
|
电子技术、通信技术;自动化技术、计算机技术 |
文献收藏号
|
CSCD:6465118
|
|
1.
熊伟. 星载超光谱大气主要温室气体监测仪载荷.
航天返回与遥感,2018,39(3):14-24
|
被引
8
次
|
|
|
|
2.
乔辉.
航天碲镉汞红外探测器工艺及暗电流研究.博士论文,2016
|
被引
1
次
|
|
|
|
3.
陈效双. 长波HgCdTe红外探测器的暗电流机理研究进展.
红外技术,2015,37(5):353-360
|
被引
7
次
|
|
|
|
4.
Chorier P. High performance HgCdTe SWIR detector development at Sofradir.
FRADIR, 43-47 rue Camille Pelletan
|
被引
1
次
|
|
|
|
5.
张明涛. 320×256短波红外焦平面温控系统设计与应用.
红外与毫米波学报,2009,28(3):173-180
|
被引
4
次
|
|
|
|
6.
.
Mars sw2 tec 320×256 2.0 µm cut-off sw aicwos thermoelectrically cooled detector. Dewar Assemely Technical Specification
|
被引
1
次
|
|
|
|
7.
冯根生.
微机控制技术,2002
|
被引
4
次
|
|
|
|
8.
吴宏鑫. PID控制的应用与理论依据.
控制工程,2003,10(1):37-42
|
被引
46
次
|
|
|