气动人工肌肉拮抗关节的力与刚度独立控制
Independent Force and Stiffness Control for Antagonistic Joint Driven by Pneumatic Artificial Muscles
查看参考文献20篇
文摘
|
针对柔性仿生关节难以实现力与刚度独立控制的问题,建立了一种新的气动人工肌肉等效弹簧模型及关节力和刚度模型,设计了一种双输入双输出滑模控制器,来实现对气动人工肌肉拮抗关节力与刚度的独立控制.最后,搭建了气动人工肌肉驱动的拮抗关节实验平台,在关节位置固定和开放两种状况下进行了实验研究,验证所提方法的有效性;在不同负载情况下进行了对比实验,验证所提方法的通用性.所提出的建模和控制方法综合考虑了仿生关节位置、力和刚度相对独立控制,在机器人与人或环境互相作用的场合有很好的应用前景. |
其他语种文摘
|
In view of the problem that it is hard to achieve independent force and stiffness control for flexible bionic joints, a new equivalent spring model of pneumatic artificial muscle and a joint force and stiffness model are built, and a twoinput two-output sliding model controller is constructed to achieve independent force and stiffness control for antagonistic joint driven by pneumatic artificial muscles. Finally, an experimental platform of the pneumatic artificial muscle-driven antagonistic joint is set up. Experiments are conducted to verify the effectiveness of the proposed method under both fixed and open joint position conditions. A comparative experiment is conducted under different loads to verify the universality of the proposed method. The proposed modeling and control scheme comprehensively considers the relatively independent control among position, force and stiffness of the bionic joint, and has a great application prospect in the scenes where a robot interacts with human or environment. |
来源
|
机器人
,2018,40(5):587-596 【核心库】
|
DOI
|
10.13973/j.cnki.robot.180256
|
关键词
|
气动人工肌肉
;
拮抗关节
;
刚度控制
;
滑模控制
|
地址
|
1.
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 辽宁, 沈阳, 110016
2.
中国科学院大学, 北京, 100049
3.
南开大学计算机与控制工程学院, 天津, 300350
4.
东北大学信息科学与工程学院, 辽宁, 沈阳, 110004
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1002-0446 |
学科
|
自动化技术、计算机技术 |
基金
|
国家863计划
;
国家自然科学基金
|
文献收藏号
|
CSCD:6435725
|
参考文献 共
20
共1页
|
1.
何玉庆. 与人共融-机器人技术发展的新趋势.
机器人产业,2015(5):74-80
|
被引
29
次
|
|
|
|
2.
陶国良. 气动人工肌肉的发展趋势与研究现状.
机械工程学报,2009,45(10):75-83
|
被引
20
次
|
|
|
|
3.
Andrikopoulos G. A survey on applications of pneumatic artificial muscles.
19th Mediterranean Conference on Control and Automation,2011:1439-1446
|
被引
2
次
|
|
|
|
4.
Sarosi J. Dynamic modeling of a pneumatic muscle actuator with two-direction motion.
Mechanism and Machine Theory,2015,85:25-34
|
被引
5
次
|
|
|
|
5.
Park Y L. Design and control of a bio-inspired soft wearable robotic device for ankle foot rehabilitation.
Bioinspiration and Biomimetics,2014,9(1):016007
|
被引
10
次
|
|
|
|
6.
Ahn K K. Design and implementation of an adaptive recurrent neural networks (ARNN) controller of the pneumatic artificial muscle (PAM) manipulator.
Mechatronics,2009,19(6):816-828
|
被引
11
次
|
|
|
|
7.
Chang M K. T-S fuzzy model-based tracking control of a one-dimensional manipulator actuated by pneumatic artificial muscles.
Control Engineering Practice,2011,19(12):1442-1449
|
被引
7
次
|
|
|
|
8.
于海涛. 基于气动肌腱驱动的拮抗式仿生关节设计与控制.
机械工程学报,2012,48(17):1-9
|
被引
11
次
|
|
|
|
9.
Jouppila V T. Sliding mode control of a pneumatic muscle actuator system with a PWM strategy.
International Journal of Fluid Power,2014,15(1):19-31
|
被引
5
次
|
|
|
|
10.
Wu J. Nonlinear disturbance observer based dynamic surface control for trajectory tracking of pneumatic muscle system.
IEEE Transactions on Control Systems Technology,2014,22(2):440-455
|
被引
8
次
|
|
|
|
11.
Zhao L. Active disturbance rejection trajectory tracking control for two-joint driven by pneumatic artificial muscles.
International Conference on Fluid Power and Mechatronics,2015:972-977
|
被引
1
次
|
|
|
|
12.
王杨. 基于鲁棒建模的气动人工肌肉驱动仿生关节的轨迹跟踪控制.
机器人,2016,38(2):248-256
|
被引
5
次
|
|
|
|
13.
Wang X. Development of an antagonistic bionic joint controller for a musculoskeletal quadruped.
IEEE/RSJ International Conference on Intelligent Robots and Systems,2013:4466-4471
|
被引
3
次
|
|
|
|
14.
刘荣.
并联机构柔顺控制及人工肌肉驱动研究,1996
|
被引
3
次
|
|
|
|
15.
Tonietti G. Adaptive simultaneous position and stiffness control for a soft robot arm.
IEEE/RSJ International Conference on Intelligent Robots and Systems,2002:1992-1997
|
被引
1
次
|
|
|
|
16.
Nakamura T. Joint stiffness and position control of an artificial muscle manipulator for instantaneous loads using a mechanical equilibrium model.
Advanced Robotics,2011,25(3/4):387-406
|
被引
3
次
|
|
|
|
17.
朱坚民. 气动肌腱驱动的拮抗式仿生关节位置/刚度控制.
机械工程学报,2017,53(13):64-74
|
被引
5
次
|
|
|
|
18.
Noritsugu T. Hybrid-type position and force control of robot manipulator using artificial rubber muscle.
Transactions of the Japan Society of Mechanical Engineers, Part C,1995,61(586):309-314
|
被引
1
次
|
|
|
|
19.
Kang B S. Compliance characteristic and force control of antagonistic actuation by pneumatic artificial muscles.
Meccanica,2014,49(3):565-574
|
被引
3
次
|
|
|
|
20.
Zhang D H. Active model-based control for pneumatic artificial muscle.
IEEE Transactions on Industrial Electronics,2017,64(2):1686-1695
|
被引
5
次
|
|
|
|
|