帮助 关于我们

返回检索结果

激光沉积修复GH738合金时效热处理组织及性能
Effect of Aging Heat Treatment on Microstructure and Properties of Laser Deposition Repaired GH738 Alloy

查看参考文献13篇

卞宏友 1 *   翟泉星 1   曲伸 2   杨光 1   王伟 1   王维 1  
文摘 研究了双极时效热处理对激光沉积修复GH738合金显微组织及力学性能的影响。结果显示:沉积态显微组织为典型的外延柱状枝晶,枝晶间距约为10 μm。经过时效处理后,修复区组织开始长大、合并。沉积态未发现γ′相,枝晶间存在立方状的MC型碳化物,枝晶干存在颗粒状M23C6型碳化物。经双级时效处理后,修复区析出γ′相:稳定化温度为820 ℃时,γ′相平均尺寸约为37 nm,碳化物在晶界处呈断续状析出。随着稳定化温度升高,γ′相及碳化物尺寸均有所增大,其中稳定化温度为840 ℃时,γ′相平均尺寸约为76 nm,碳化物呈项链状析出;稳定化温度为860 ℃时,γ′相平均尺寸无明显增大,部分γ′相发生明显粗化,尺寸达到150 nm,晶界处碳化物开始呈包膜状析出。力学性能测试结果显示:时效处理后试样抗拉强度明显提高,随着稳定化温度升高,抗拉强度先升高后降低,断后伸长率不断降低。
其他语种文摘 The effects of bipolar aging heat treatment on the microstructure and mechanical properties of GH738 alloy repaired by laser deposition were studied. The results show that the microstructure of repair area presents typical characteristics of the epitaxial growth of columnar crystals and the dendrite spacing is about 10 μm. After the aging treatment, the repair area begins to grow and merge. The results of SEM analysis show that there is no γ′ at the as-deposited sample, and the cubic MC type carbide is formed at the interdendritic, and the M23C6 type carbide at the dendrite arm. After the aging treatment, γ′ phase precipitates at the repair area whose average size is 37 nm, and the carbide precipitates in the grain boundary with the discontinued character when the temperature of the stabilization step is 820 °C. With the increase of the stabilization temperature, the size of the γ′ and carbide increases. When the temperature is 840 °C, the average size of the γ′ is about 76 nm, and the carbide is precipitated in the form of necklace. With increasing the temperature of the stabilization step to 860 °C, the average size of the γ′ does not increase obviously, and part of the γ′ is obviously coarsened and the size reaches to 150 nm; meanwhile the carbides at the grain boundaries begin to be closed. The results of mechanical property show that the tensile strength of the sample increases obviously after aging treatment, and with the increase of the temperature, the tensile strength increases first and then decreases, and the elongation decreases continuously.
来源 稀有金属材料与工程 ,2019,48(1):317-322 【核心库】
关键词 激光沉积修复 ; GH738合金 ; 热处理 ; 显微组织 ; 力学性能
地址

1. 沈阳航空航天大学, 航空制造工艺数字化国防重点学科实验室, 辽宁, 沈阳, 110136  

2. 中国航发沈阳黎明航空发动机有限责任公司, 辽宁, 沈阳, 110043

语种 中文
文献类型 研究性论文
ISSN 1002-185X
学科 金属学与金属工艺;机械、仪表工业
基金 国家自然科学基金 ;  中国航空科学基金 ;  辽宁省自然科学基金
文献收藏号 CSCD:6412137

参考文献 共 13 共1页

1.  董建新. 高温合金GH4738及应用,2014:1 被引 4    
2.  薛蕾. 铸造技术,2008,29(3):391 被引 23    
3.  潘浒. 激光熔覆修复镍基高温合金稀释率的可控性研究. 中国激光,2013,40(4):0403007 被引 26    
4.  Zhong Minlin. Scripta Materialia,2005,53:159 被引 23    
5.  陈博. 热处理对激光熔化沉积TC17钛合金显微组织及力学性能的影响. 中国激光,2014,41(4):0403001 被引 17    
6.  赵卫卫. 中国激光,2009,36(12):3221 被引 5    
7.  席明哲. 激光快速成形Inconel 718超合金拉伸力学性能研究. 中国激光,2012,39(3):0303004 被引 13    
8.  卞宏友. 激光沉积修复GH4169合金热处理的组织及性能. 中国激光,2015,42(12):1206001 被引 5    
9.  赵阳. 定向凝固钴基高温合金DZ40M中碳化物析出与再结晶的交互作用. 稀有金属材料与工程,2008,37(6):1032 被引 7    
10.  Hussein N I S. Materials Science and Engineering A,2008,497:260 被引 6    
11.  赵晓明. 激光快速成形Rene′88DT高温合金的时效强化研究. 稀有金属材料与工程,2007,36(1):2208 被引 6    
12.  杨金侠. K465合金在冷热循环过程中碳化物的析出行为. 稀有金属材料与工程,2007,36(12):42 被引 6    
13.  王璞. 晶界碳化物对GH864合金裂纹扩展速率的影响. 稀有金属材料与工程,2014,43(11):2723 被引 2    
引证文献 5

1 卞宏友 热处理对激光沉积DZ125合金组织与摩擦磨损性能的影响 稀有金属材料与工程,2020,49(8):2839-2844
被引 2

2 卞宏友 激光沉积修复单道多层DZ125双级时效热处理组织与性能 稀有金属材料与工程,2020,49(9):3122-3128
被引 0 次

显示所有5篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号