帮助 关于我们

返回检索结果

超声振动对TC1钛合金板材拉伸性能的影响
Effects of Ultrasonic Vibration on Tensile Properties of TC1 Titanium Alloy Sheet

查看参考文献24篇

高铁军 1 *   刘小军 1   于鲲 2   齐林 1   王硕 1  
文摘 通过超声振动辅助拉伸试验,研究了超声振动的频率、振幅及间歇振动方式等参数对TC1钛合金板材应力与应变、屈服强度、抗拉强度及延伸率等拉伸性能指标的影响。通过拉伸试件的组织和性能分析,研究了超声振动参数对TC1板材金相组织、断口形貌及维氏硬度的影响。结果表明,TC1钛合金板材拉伸过程中叠加一定频率、振幅的超声振动可以明显降低材料的屈服强度和抗拉强度,并且在一定工艺参数条件下还可以较大幅度提高材料的延伸率,而且对其组织和性能影响较小。
其他语种文摘 The influences of frequency, amplitude and intermittent vibration modes of ultrasonic vibration on the stress and strain, yield strength, tensile strength and elongation of TC1 titanium alloy sheet were investigated by ultrasonic vibration assisted tensile test. The influence of ultrasonic vibration parameters on the microstructure, fracture morphology and Vickers hardness of TC1 sheet were studied by analyzing the microstructure and properties of tensile specimens. The results show that superimposing a certain frequency and amplitude of the ultrasonic vibration in the tensile process can significantly reduce the yield strength and tensile strength of the TC1 titanium alloy sheet. The elongation of the alloy can be greatly improved under certain technological parameters, and the effect on the microstructure and properties of TC1 sheet is less.
来源 稀有金属材料与工程 ,2019,48(1):286-292 【核心库】
关键词 超声振动 ; TC1钛合金 ; 拉伸性能 ; 振动方式
地址

1. 沈阳航空航天大学, 辽宁, 沈阳, 110136  

2. 中国航发沈阳黎明航空发动机有限责任公司, 辽宁, 沈阳, 110043

语种 中文
文献类型 研究性论文
ISSN 1002-185X
学科 金属学与金属工艺
基金 国家自然科学基金 ;  中国航空科学基金
文献收藏号 CSCD:6412133

参考文献 共 24 共2页

1.  朱康平. 稀有金属材料与工程,2012,41(11):2060 被引 1    
2.  金和喜. 航空用钛合金研究进展. 中国有色金属学报,2015,25(2):280 被引 159    
3.  付艳艳. 航空用钛合金的研究与应用进展. 稀有金属,2006,30(6):850 被引 95    
4.  高铁军. 复杂形状TA2钛合金半管件黏性介质压力成形. 中国有色金属学报,2016,26(4):790 被引 5    
5.  Bai Y. Procedia Engineering,2014,81:1475 被引 3    
6.  Liu Y X. Materials Letters,2012,67(1):52 被引 6    
7.  Hung J C. Materials and Design,2013,45:412 被引 12    
8.  Shalvandi M. Materials and Design,2013,46:713 被引 13    
9.  Nath C. Journal of Materials Processing Technology,2007,192/193:159 被引 18    
10.  Schwaller P. Ultrasonics,2000,38(1/8):212 被引 6    
11.  Yao Z H. Journal of Materials Processing Technology,2012,212:640 被引 9    
12.  Bai Y. Journal of Materials Processing Technology,2013,213:330 被引 4    
13.  Bai Y. Journal of Materials Processing Technology,2016,229:367 被引 6    
14.  Cao M Y. Flexible die drawing of magnesium alloy sheet by superimposing ultrasonic vibration. Transactions of Nonferrous Metals Society of China,2017,27(1):163 被引 6    
15.  Pasierb A. Journal of Materials Processing Technology,1992,34(1/4):489 被引 14    
16.  Jimma T. Journal of Materials Processing Technology,1998,80/81:406 被引 26    
17.  Wen T. Journal of Shanghai Jiaotong University,2012,17(4):456 被引 8    
18.  Zhuang X C. Forming mechanism of ultrasonic vibration assisted compression. Transactions of Nonferrous Metals Society of China,2015,25(7):2352 被引 7    
19.  Ashida Y. Journal of Materials Processing Technology,2007,187:118 被引 17    
20.  Wang C J. Materials and Design,2016,112:246 被引 11    
引证文献 6

1 高铁军 温热条件下超声振动对TC4钛合金板材各向异性的影响 塑性工程学报,2020,27(3):88-94
被引 3

2 郑庭坚 超声振动辅助镁合金板拉伸力学行为及本构建模 塑性工程学报,2020,27(12):170-176
被引 2

显示所有6篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号