国外航空发动机用SiC_f/SiC复合材料的材料级性能测试研究进展
Progress in Coupon Tests of SiC_f/SiC Ceramic Matrix Composites Used for Aero Engines
查看参考文献76篇
|
文摘
|
国外在航空发动机用SiC_f/SiC复合材料的研发和应用方面进展迅速,这得益于其开展了大量的材料级性能测试并借此建立的材料性能数据库。本文梳理了SNECMA,NASA,GE公司典型SiC_f/SiC复合材料牌号的基本物理性能和力学性能,探讨了制备工艺等因素对材料性能的影响,着重分析并讨论了复合材料的拉伸性能;同时综述了国外在该类材料使用性能方面开展的测试,主要包括高温抗氧化性、高温水/氧环境性能、疲劳及蠕变性能、抗热冲击性能以及抗外来物冲击测试等,并对材料在热、力、水、氧等不同环境因素下的损伤行为和失效机制进行了阐述。在此基础上,提出了我国在SiC_f/SiC复合材料后续性能测试研究方面的建议。 |
|
其他语种文摘
|
The research of SiC_f/SiC ceramic matrix composites(CMCs)as well as their applications in aero engines has obtained rapid development recently.This is owing to the large quantity of coupon tests performed on various properties of these materials,and the establishment of corresponding databases. Here,the physical and mechanical properties of CMCs developed by SNECMA,NASA and GE were reviewed.The influence of fabrication techniques on the properties of materials were discussed with an emphasis on tensile properties.Meanwhile,the service performances of these materials were summarized,including oxidation,water vapor/oxygen environmental resistance at high temperature, fatigue and creep behaviors,resistance to thermal shock and foreign object damage,along with the mechanism of damage and failure in environments such as heating,loading,water and oxidation.At last,some suggestions about domestic further research on performances testing for SiC_f/SiC ceramic matrix composites were proposed. |
|
来源
|
材料工程
,2018,46(11):1-12 【核心库】
|
|
DOI
|
10.11868/j.issn.1001-4381.2018.000503
|
|
关键词
|
陶瓷基复合材料
;
材料级测试
;
物理性能
;
力学性能
;
使用性能
|
|
地址
|
1.
中国航发北京航空材料研究院, 先进复合材料国防科技重点实验室, 北京, 100095
2.
中国航发北京航空材料研究院, 航空材料先进腐蚀与防护航空科技重点实验室, 北京, 100095
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
1001-4381 |
|
学科
|
一般工业技术 |
|
文献收藏号
|
CSCD:6366554
|
参考文献 共
76
共4页
|
|
1.
Katoh Y. Current status and recent research achievements in SiC/SiC composites.
Journal of Nuclear Materials,2014,455(1/3):387-397
|
被引
41
次
|
|
|
|
|
2.
卢国锋. 连续纤维增强陶瓷基复合材料界面层研究进展.
材料工程,2014(11):107-112
|
被引
12
次
|
|
|
|
|
3.
Ding D. Processing,properties and applications of ceramic matrix composites,SiCf/SiC:an overview.
Advances in Ceramic Matrix Composites,2014:99-116
|
被引
1
次
|
|
|
|
|
4.
Naslain R. Design,preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:an overview.
Composites Science and Technology,2004,64(2):155-170
|
被引
197
次
|
|
|
|
|
5.
穆阳. 填料法制备SiCf/SiC复合材料的力学性能和高温介电性能.
航空材料学报,2018,38(3):31-39
|
被引
2
次
|
|
|
|
|
6.
Udayakumar A. Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI.
Journal of the European Ceramic Society,2011,31(6):1145-1153
|
被引
28
次
|
|
|
|
|
7.
肖鹏. 高温陶瓷基复合材料制备工艺的研究.
材料工程,2000(2):41-44
|
被引
10
次
|
|
|
|
|
8.
Liu H T. Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process.
Ceramics International,2010,36(7):2033-2037
|
被引
4
次
|
|
|
|
|
9.
Yu H J. Mechanical behavior of SiCf/SiC composites with alternating PyC/SiC multilayer interphases.
Materials & Design,2013,44:320-324
|
被引
5
次
|
|
|
|
|
10.
Yin J. The effects of SiC precursors on the microstructures and mechanical properties of SiCf/SiC composites prepared via polymer impregnation and pyrolysis process.
Ceramics International,2015,41(3):4145-4153
|
被引
3
次
|
|
|
|
|
11.
谭僖. 不同纤维预制体结构对SiC_f /PyC/SiBCN复合材料力学性能的影响.
航空材料学报,2017,37(4):45-51
|
被引
6
次
|
|
|
|
|
12.
Leuchs M. Chemical vapor infiltration processes for ceramic matrix composites: manufacturing, properties,applications.
Ceramic Matrix Composites-Fiber Reinforced Ceramics and their Applications,2008:141-164
|
被引
1
次
|
|
|
|
|
13.
Kotani M. The effect on the tensile properties of PIP-processed SiC/SiC composite of a chemical vapor-infiltrated SiC layer overlaid on the pyrocarbon interface layer.
Composites Part A:Applied Science and Manufacturing,2016,87:123-130
|
被引
3
次
|
|
|
|
|
14.
Luo Z. Mechanical properties of SiC/SiC composites by PIP process with a new precursor at elevated temperature.
Materials Science and Engineering:A,2014,607:155-161
|
被引
5
次
|
|
|
|
|
15.
Corman G S. Silicon melt infiltrated ceramic composites(HiPerCompTM).
Handbook of Ceramic Composites,2004:99-116
|
被引
4
次
|
|
|
|
|
16.
Dicarlo J A. SiC/SiC composites for 1200℃and above.
Handbook of Ceramic Composites,2004:77-98
|
被引
2
次
|
|
|
|
|
17.
田仕. 致密陶瓷材料密度和气孔率的测试方法.
理化检验(物理分册),2011,47(8):476-479
|
被引
5
次
|
|
|
|
|
18.
朱海玲. 测定陶瓷材料密度及其气孔率的方法.
理化检验(物理分册),2006,42(6):289-291
|
被引
11
次
|
|
|
|
|
19.
Yonathan P. Improvement of SiCf/SiC density by slurry infiltration and tape stacking.
Materials Research Bulletin,2009,44(11):2116-2122
|
被引
2
次
|
|
|
|
|
20.
Wang Z. Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler.
Journal of the European Ceramic Society,2010,30(3):787-792
|
被引
9
次
|
|
|
|
|
了解气象卫星更多信息，请访问