帮助 关于我们

返回检索结果

Effects of Nb on microstructure and wear resistance of Fe–Cr–C–B surfacing alloy

查看参考文献19篇

文摘 The influence of Nb on the microstructure and wear resistance of the surfacing layer was investigated by using the Fe-based flux-cored wire in the Fe–Cr–C–B system. The microstructure, microhardness and wear resistance properties of the samples were investigated by X-ray diffraction, scanning electron microscopy, microhardness testing and abrasive wear testing, respectively. The results indicate that microstructures of the alloy are composed of martensite, retained austenite, M_(23)(C,B)_6 and NbC. Boride M_(23)(C,B)_6 is distributed along the grain boundaries, while NbC in shape-regular quadrilateral is distributed in martensite. The microhardness is distributed from the substrate to the surfacing layer gradiently. NbC significantly improved the wear resistance of surfacing layer.
来源 Journal of Iron and Steel Research , International,2018,25(2):243-251 【核心库】
DOI 10.1007/s42243-018-0033-3
关键词 Flux-cored wire ; Surfacing layer ; Microhardness ; Microstructure ; Wear resistance
地址

Department of Material Science and Engineering, Shenyang University of Technology, Liaoning, Shenyang, 110870

语种 英文
文献类型 研究性论文
ISSN 1006-706X
学科 冶金工业
基金 supported by Doctor Foundation Start-up Project of Liaoning Province
文献收藏号 CSCD:6304600

参考文献 共 19 共1页

1.  Gao X H. Sol. Energy Mater. Solar Cells,2016,157:543-549 被引 3    
2.  Fu Z Z. Mater. Sci. Eng. A,2016,676:278-288 被引 4    
3.  Modi O P. Mater. Sci. Eng. A,2003,343:235-242 被引 7    
4.  Gualco A. Wear,2016,360/361:14-20 被引 4    
5.  Liu H Y. J. Alloy. Compd,2016,23:276-280 被引 1    
6.  Li Q T. J. Alloy. Compd,2016,23:124-129 被引 1    
7.  Yoshioka S. J. Eur. Ceram. Soc,2016,36:4155-4162 被引 7    
8.  Li Z R. J. Alloy. Compd,2016,23:834-841 被引 1    
9.  Liu Y H. Surf. Eng,2013,28:560-563 被引 1    
10.  Surzhenkov A. Surf. Eng,2016,32:624-630 被引 3    
11.  Singh A. J. Mater. Sci,2004,39:4553-4560 被引 15    
12.  Sun T. J. Alloy. Compd,2015,22:84-90 被引 1    
13.  Modi A P. Tribol. Int,2007,40:490-497 被引 3    
14.  Jian Y. Wear,2016,362/363:68-77 被引 4    
15.  Cabral Miramontes J A. J. Mater. Eng. Perform,2010,19:880-884 被引 2    
16.  Huang S G. Metal Powder Rep,2016,71(5):349-355 被引 1    
17.  Kim J H. Wear,2008,267:1415-1419 被引 1    
18.  Yang Y. J. Nucl. Mater,2014,448:282-293 被引 5    
19.  Zong L. Adv. Mater. Res,2011,189/193:518-522 被引 1    
引证文献 3

1 Zhou Qi Microstructural features and precipitation behavior of Ti, Nb and V microalloyed steel during isothermal processing Journal of Iron and Steel Research, International,2019,26(1):102-111
被引 5

2 Li Hui Influence of varying forms of bionic units on repairing remaining quenching surface of gray cast iron Journal of Iron and Steel Research, International,2021,28(2):201-210
被引 0 次

显示所有3篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号