O含量对激光增材制造12CrNi2合金钢组织结构及力学性能的影响
Effect of O Content on Microstructure and Mechanical Property of 12CrNi2 Alloy Steel Prepared by Laser Additive Manufacturing
查看参考文献18篇
|
文摘
|
对两种不同O含量(5 300 ppm和350 ppm)的12CrNi2合金钢粉末进行了激光增材制造(LAM)成形,发现低O含量合金钢粉成形后抑制了孔洞及氧化物夹杂形成,导致合金钢抗拉强度和延伸率明显提高。 |
|
其他语种文摘
|
12CrNi2 alloy steels were manufactured by laser additive manufacturing (LAM) technology, using two types of powders with different O contents (5 300 ppm and 350 ppm). It was found that the formation of low O content steel powder suppressed the formation of holes and oxide inclusions,resulting in significantly increased tensile strength and elongation of alloy steel. |
|
来源
|
应用激光
,2018,38(1):1-6 【扩展库】
|
|
DOI
|
10.14128/j.cnki.al.20183801.001
|
|
关键词
|
激光增材制造
;
12CrNi2合金钢
;
O含量
;
显微组织
;
抗拉强度
|
|
地址
|
1.
中国科学院金属研究所金属腐蚀与防护实验室, 辽宁, 沈阳, 110016
2.
中国科学技术大学材料科学与工程学院, 安徽, 合肥, 230026
3.
南昌航空大学材料科学与工程学院, 江西, 南昌, 330063
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1000-372X |
|
学科
|
金属学与金属工艺 |
|
基金
|
国家重点研发计划资助项目
|
|
文献收藏号
|
CSCD:6217744
|
参考文献 共
18
共1页
|
|
1.
Murr L E. Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies.
Journal of Materials Science Technology,2012,28(1):1-14
|
被引
75
次
|
|
|
|
|
2.
Popovich V A. Functionally graded inconel 718 processed by additive manufacturing: crystallographic texture, anisotropy of microstructure and mechanical properties.
Materials Design,2017(114):441-449
|
被引
20
次
|
|
|
|
|
3.
Elahinia M. Fabrication of NiTi through additive manufacturing:a review.
Progress in Materials Science,2016(83):630-663
|
被引
51
次
|
|
|
|
|
4.
Hagedom Y. Laser additive manufacturing of ceramic components: materials, processes,and mechanisms.
Laser Additive Manufacturing,2017:163-180
|
被引
1
次
|
|
|
|
|
5.
林鑫. 高性能金属构件的激光增材制造.
中国科学:信息科学,2015,45(9):1111-1126
|
被引
82
次
|
|
|
|
|
6.
王华明. 大型钛合金结构件激光直接制造的进展与挑战(邀请论文).
中国激光,2009,36(12):3204-3209
|
被引
119
次
|
|
|
|
|
7.
杨强. 激光增材制造技术的研究现状及发展趋势.
航空制造技术,2016,507(12):26-31
|
被引
64
次
|
|
|
|
|
8.
Liu R. Aerospace applications of laser additive manufacturing.
Laser Additive Manufacturing,2017:351-371
|
被引
4
次
|
|
|
|
|
9.
Attar H. Effect of powder particle shape on the properties of in situ Ti-TiB composite materials produced by selective laser melting.
Journal of Materials Science Technology,2015,31(10):1001-1005
|
被引
27
次
|
|
|
|
|
10.
Li X P. Selective laser melting of Al-12Si alloy: Enhanced densification via powder drying.
Additive Manufacturing,2016,10:10-14
|
被引
5
次
|
|
|
|
|
11.
李胜. 激光熔覆专用铁基合金粉末的研究进展.
激光技术,2004,28(6):591-594
|
被引
17
次
|
|
|
|
|
12.
Barin I.
Thermochemical data of pure substances.3rd ed,1989
|
被引
1
次
|
|
|
|
|
13.
Lepera F S. Improved etching technique to emphasize martensite and bainite in high-strength dual-phase steel.
J. Metal,1980,32(3):38-39
|
被引
12
次
|
|
|
|
|
14.
Girault E. Metal-lographic methods for revealing the multiphase micro-structure of TRIP-assisted steels.
Materials Characterization,1998,40(2):111-118
|
被引
51
次
|
|
|
|
|
15.
蔡晓文. TRIP 钢彩色金相组织定量分析方法.
金属热处理,2014,39(12):139-143
|
被引
5
次
|
|
|
|
|
16.
Zhang Yongjie. Numerical study of thermal history in laser aided direct metal deposition process.
Science China Physics Mechanics & Astronomy,2012,55(8):1431-1438
|
被引
4
次
|
|
|
|
|
17.
Qian L. Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti-6Al-4V samples.
Metal Science Journal,2005,21(5):597-605
|
被引
1
次
|
|
|
|
|
18.
杨全民. 奥氏体贫碳区性质与贝氏体相变热力学.
金属学报,1990,26(4):235-241
|
被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问