车载激光扫描数据中建筑物立面快速提取
A Fast Method of Building Extraction from Mobile LiDAR Scanning Data
查看参考文献18篇
|
文摘
|
本文提出一种结合多种投影影像从车载激光扫描数据中提取建筑物的方法。该方法首先将点云数据投影到XOY平面,生成多种投影影像;然后结合建筑物几何语义特征,对已获取的投影影像进行几何约束与形态学运算,得到建筑物种子区域;在此基础上,通过设置高差阈值,在最高高程影像上进行建筑物种子区域的八邻域区域生长,得到建筑物区域;最后将影像上的建筑物区域反投影到三维空间,提取出建筑物目标。实验结果表明,该方法能有效提取点云数据中的建筑物立面,取得较高的正确率和完整率,且大大提高了计算效率。 |
|
其他语种文摘
|
The mobile LiDAR scanning system is a useful tool for getting the top information as well as fa?ade information of buildings, which makes it as primary means to obtain 3D city modeling infrastructure. The first step of 3D modeling is to extract the building data from the complex mobile point cloud data quickly and accurately. Therefore, it is of great significance to study a fast and effective method of building extraction from vehicle laser scanning data. The buildings in mobile laser scanning data has the characteristics of uneven distribution of point densities, lack of existence, and some of the buildings in the measured data are not strictly flat, the top data of the low building is not the fa?ade. In order to solve the problems discussed above, a method of building extraction in complex urban scenes from mobile LiDAR is proposed by using a variety of projection images. Firstly, the method projects the point cloud data into the XOY plane to produce a variety of projected images. Secondly, based on the geometric semantic features of the buildings, the geometric constraints and morphological calculations of the acquired projection images are processed to get the seed area of the building. On the basis of this seed area, the eight-neighborhood region of the building seed area is grown on the highest elevation image by setting the height difference threshold to obtain the building area. Lastly, the building area on the image is back-projected into three-dimensional space to extract the building objectives. Two data sets with different point densities and different scanning tools are used to verify the effectiveness of this method. Results show that this method has higher data processing efficiency than the existing three-dimensional extraction method because point cloud data is projected into the two-dimensional image and the geometrical features of the building are synthetically used in the process of building extraction. Using this method, both top surface and non-fa?ade buildings can be extracted precisely. In this paper, sub-regional growth methods solve the problem that it's difficult to extract the buildings with incompleteness of cloud data which is caused by the blockage through the traditional projection method. |
|
来源
|
地球信息科学学报
,2018,20(4):462-470 【核心库】
|
|
DOI
|
10.12082/dqxxkx.2018.170470
|
|
关键词
|
几何特征
;
投影影像
;
建筑物提取
;
种子区域
;
车载激光扫描系统
;
形态学运算
|
|
地址
|
1.
信息工程大学, 郑州, 450001
2.
地理信息工程国家重点实验室, 地理信息工程国家重点实验室, 西安, 710054
3.
城市空间信息工程北京市重点实验室, 城市空间信息工程北京市重点实验室, 北京, 100000
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1560-8999 |
|
学科
|
测绘学 |
|
基金
|
国家自然科学基金项目
;
地理信息工程国家重点实验室基金项目
;
城市空间信息工程北京市重点实验室经费资助项目
|
|
文献收藏号
|
CSCD:6216735
|
参考文献 共
18
共1页
|
|
1.
卢秀山. 车载式城市信息采集与三维建模系统.
武汉大学学报·工学版,2003,36(3):76-80
|
被引
33
次
|
|
|
|
|
2.
杨必胜. 从车载激光扫描数据中提取复杂建筑物立面的方法.
测绘学报,2013,42(3):411-417
|
被引
33
次
|
|
|
|
|
3.
Abuhadrous I. Digitizing and 3D modeling of urban environments and roads using vehicle-borne laser scanner system.
Ieee/rsj International Conference on Intelligent Robots and Systems,2004:76-81
|
被引
4
次
|
|
|
|
|
4.
Manandhar D. Auto-extraction of urban features from vehicle-borne laser data.
International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences,2002
|
被引
5
次
|
|
|
|
|
5.
Jochem A. Extraction of vertical walls from mobile laser scanning data for solar potential assessment.
Remote Sensing,2011,3(4):650-667
|
被引
7
次
|
|
|
|
|
6.
董震. 车载激光扫描数据中多类目标的层次化提取方法.
测绘学报,2015,44(9):980-987
|
被引
28
次
|
|
|
|
|
7.
卢维欣. 大场景内建筑物点云提取及平面分割算法.
中国激光,2015,42(9):336-342
|
被引
4
次
|
|
|
|
|
8.
Rutzinger M. Feasibility of facade footprint extraction from mobile laser scanning data.
Photogrammetrie, Fernerkundung, Geoinformation,2011,6952(2011):97-107
|
被引
1
次
|
|
|
|
|
9.
刘亚文. 蚁群算法的建筑立面点云数据提取.
武汉大学学报·信息科学版,2012,37(11):1307-1310
|
被引
7
次
|
|
|
|
|
10.
魏征. 车载激光扫描点云中建筑物边界的快速提取.
遥感学报,2012,16(2):286-296
|
被引
12
次
|
|
|
|
|
11.
杨必胜. 面向车载激光扫描点云快速分类的点云特征图像生成方法.
测绘学报,2010,39(5):540-545
|
被引
45
次
|
|
|
|
|
12.
彭晨. 基于移动激光扫描点云特征图像和SVM的建筑物立面半自动提取方法.
地球信息科学学报,2016,18(7):878-885
|
被引
7
次
|
|
|
|
|
13.
Hammoudi K. Extracting building footprints from 3D point clouds using terrestrial laser scanning at street level.
Isprs Workshop on City Models, Roads and Traffic,2009
|
被引
1
次
|
|
|
|
|
14.
Hernandez J. Point cloud segmentation towards urban ground modeling.
Urban Remote Sensing Event,2009:1-5
|
被引
2
次
|
|
|
|
|
15.
Serna A. Segmentation of facades from urban 3D point clouds using geometrical and morphological attribute-based operators.
ISPRS International Journal of Geo-Information,2016,5(1):6
|
被引
1
次
|
|
|
|
|
16.
Serna A. Detection, segmentation and classification of 3D urban objects using mathematical morphology and supervised learning.
Isprs Journal of Photogrammetry & Remote Sensing,2014,93(7):243-255
|
被引
8
次
|
|
|
|
|
17.
Morales A F S.
Semantic analysis of 3D point clouds from urban environments: ground, facades, urban objects and accessibility,2014
|
被引
1
次
|
|
|
|
|
18.
Yu Y. Three-Dimensional object matching in mobile laser scanning point clouds.
IEEE Geoscience & Remote Sensing Letters,2014,12(3):492-496
|
被引
6
次
|
|
|
|
|
了解气象卫星更多信息，请访问