基于多光谱LiDAR数据的道路中心线提取
Road Extraction Method Based on Multi-spectral LiDAR Data
查看参考文献18篇
|
文摘
|
针对城市三维激光点云中,道路与地面高程相差小、激光反射强度相近使得道路提取困难;广场、停车场等地物的高程、反射强度与道路极为相近,容易产生错误提取的问题。本文设计了一种描述道路条带信息的局部二进制特征(Stripe Local Binary Feature, SLBF),结合LiDAR数据中的三维信息和多光谱信息获得基于强度、密度和平坦度等统计特征(Statistics-Based Feature, SBF),并采用随机森林分类器实现了机载点云中道路面点云和非道路面点云的有效提取。通过欧式聚类精化道路点云和迭代腐蚀边界细化中心线,进而获得矢量化的道路中心线。以Waddenzee区域的多光谱机载点云数据进行实验验证,道路中心线提取结果的完整度达到94.15%,准确度达到97.95%,精度达到92.28%。实验结果表明,该方法可以有效地提取道路中心线,同时由于设计的特征具有不变性,能够适用于城市和林间小路等各种环境。 |
|
其他语种文摘
|
Because of the little elevation difference between road points and ground points, and the similar laser reflection intensity between them, it is relatively hard to extract the road from lidar data at present. Furthermore, the same elevation and reflection intensity among the road, square and park makes the square and park being mistaken as road unavoidable in the city environment. In order to use the three-dimensional and multi-spectral information of the LiDAR comprehensively in this paper, data preprocessing which containing the point cloud filtering, sample collection and the data fusion is conducted first. The purpose of the filtering is to get the ground points from the LiDAR data, and the data fusion achieves the consistency of the multi-spectral LiDAR data. Then, the statistical features of the ground points can be obtained based on the intensity, the density and the flatness. To describe the road's strip feature for distinguishing road from the square and park, the strip local binary feature (SLBF) is proposed. The SLBF is gained in a circular region which are intensity comparisons between the central position and every circular region position, and it is represented by a 96-dimension feature with value of 0 or 1. The LiDAR data is then classified as the road and non-road points by the features (Statistics-Based Feature, SBF and Stripe Local Binary Feature, SLBF) proposed above through a random forest classifier. After a further refinement by an Euclidean clustering, the road axis points are extracted by the thinning of the road points step by step by the iterative corrosion boundary method. In this paper we project the LiDAR data to the horizontal plane and use the K3M method to extract the center line of the road, and then re-project it back to the three-dimension space. Finally, the extracted road axis points are vectorized as the final result of the method. We used the multi-spectral point cloud data of the Waddenzee region to verify the method proposed in the paper. The result of the experiment shows that the completeness of the road axis vectorization achieves 94.15%, the accuracy achieves 97.95%, and the precision reaches 92.28%. The experiment shows that the proposed method can extract the road points efficiently, and vectorize the road axis correctly, it can be applied to many kinds of environments such as urban and forest as the designed features have the invariance of environments. |
|
来源
|
地球信息科学学报
,2018,20(4):452-461 【核心库】
|
|
DOI
|
10.12082/dqxxkx.2018.170634
|
|
关键词
|
多光谱机载激光点云
;
道路提取
;
局部二进制特征
;
随机森林分类器
;
矢量化
|
|
地址
|
1.
武汉大学, 测绘遥感信息工程国家重点实验室, 武汉, 430079
2.
中国科学院测量与地球物理研究所, 大地测量与地球动力学国家重点实验室, 武汉, 430077
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
1560-8999 |
|
学科
|
测绘学 |
|
基金
|
国家自然科学基金重点项目
|
|
文献收藏号
|
CSCD:6216734
|
参考文献 共
18
共1页
|
|
1.
Zhang C.
Updating of cartographic road databases by image analysis,2002
|
被引
1
次
|
|
|
|
|
2.
Weng Q. Remote sensing of impervious surfaces in the urban areas: Requirements, methods, and trends.
Remote Sensing of Environment,2012,117(2):34-49
|
被引
42
次
|
|
|
|
|
3.
Greene R. Road detection from high and low resolution satellite images.
International Archives of the Photogrammetry,2005,23(3):37-41
|
被引
1
次
|
|
|
|
|
4.
Liu L. Color component-based road feature extraction from airborne Lidar and imaging data sets.
Journal of Surveying Engineering,2016,143(1):04016021
|
被引
1
次
|
|
|
|
|
5.
彭检贵. 利用机载LiDAR点云数据提取城区道路.
测绘通报,2012(9):16-19
|
被引
12
次
|
|
|
|
|
6.
龚亮. 基于强度信息聚类的机载LiDAR点云道路提取.
测绘通报,2011(9):15-17
|
被引
14
次
|
|
|
|
|
7.
Li Y. Road detection from dense lidar data based on local and global information.
International Conference on Geoinformatics,2016:1-5
|
被引
1
次
|
|
|
|
|
8.
Liu L. A novel algorithm for road extraction from airborne Lidar data.
Research at Locate,2014:154-163
|
被引
1
次
|
|
|
|
|
9.
李怡静. 影像与LiDAR数据信息融合复杂场景下的道路自动提取.
测绘学报,2012,41(6):870-876
|
被引
28
次
|
|
|
|
|
10.
Zhao J. Road network extraction from airborne LiDAR data using scene context.
International Workshop on Point Cloud Processing,2012:9-16
|
被引
1
次
|
|
|
|
|
11.
Ferraz A. Large-scale road detection in forested mountainous areas using airborne topographic lidar data.
Isprs Journal of Photogrammetry & Remote Sensing,2016,112:23-36
|
被引
5
次
|
|
|
|
|
12.
Schmidt A. Contextual classification of full waveform Lidar data in the Wadden Sea.
IEEE Geoscience & Remote Sensing Letters,2014,11(9):1614-1618
|
被引
1
次
|
|
|
|
|
13.
Schmidt A. Classification of airborne laser scanning data in Wadden Sea areas using conditional random fields.
ISPRS-International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences,2012,XXXIX-B3:161-166
|
被引
1
次
|
|
|
|
|
14.
惠振阳. 机载LiDAR点云中道路的提取方法.
测绘科学,2017,42(3):70-74
|
被引
4
次
|
|
|
|
|
15.
Yang B. Two-step adaptive extraction method for ground points and breaklines from lidar point clouds.
Isprs Journal of Photogrammetry & Remote Sensing,2016,119:373-389
|
被引
7
次
|
|
|
|
|
16.
Breiman L. Random Forests.
Machine Learning,2001,45(1):5-32
|
被引
2783
次
|
|
|
|
|
17.
Saeed K. K3M: A universal algorithm for image skeletonization and a review of thinning techniques.
International Journal of Applied Mathematics & Computer Science,2010,20(2):317-335
|
被引
11
次
|
|
|
|
|
18.
Ramer U. An iterative procedure for the polygonal approximation of plane curves.
Computer Graphics & Image Processing,1972,1(3):244-256
|
被引
36
次
|
|
|
|
|
了解气象卫星更多信息，请访问