帮助 关于我们

返回检索结果

白车身孔槽类特征三维坐标在线测量方法研究
Study of On-line Measurement Method for 3D Coordinates of Body-in-White Hole Slot Features

查看参考文献16篇

文摘 为实现白车身孔槽类特征三维坐标的视觉测量,在双目立体视觉测量原理的技术上,以激光器辅助扫描被测孔槽完成三维测量,针对圆孔和复合孔槽边缘及孔心坐标的空间定位问题,提出一种在线测量方法。采用Canny边缘检测和Ramer算法分割出圆弧部分完成孔边缘的粗定位,结合Bazen方法与正交多项式拟合法实现亚像素边缘点坐标的精确定位,并通过权重拟合得到椭圆参数方程。在线激光光纹中心线提取过程中,融合极值法、阈值法与重心法,将拟合椭圆与光纹中心线的交点作为双目立体视觉的匹配点,进而完成空间点三维坐标的测量。实验结果表明,提出的方法鲁棒性好,对圆孔类特征的综合定位精度高。
其他语种文摘 In order to realize the visual measurement for the 3D coordinates of body-in-white hole slot feature,based on the principle of binocular stereo vision measurement,the laser is used as the auxiliary equipment to scan the tested hole slot,to complete 3D measurement. Aiming at the space location problem of round hole, compound hole edge and hole core coordinate, an on-line measurement method is proposed. Canny edge detection and Ramer algorithm are used to segment the circular arcs for completing the rough positioning of hole edges. The precise localization of the sub-pixel edge point coordinates is realized by combining the Bazen algorithm and the orthogonal polynomial fitting method. And the ellipse parameter equation is obtained by weight fitting. During online extraction of laser stripe centerline,combining the extremum method,threshold method and gravity method,the intersection points of the fitted ellipse and the center line of light are used as the matching points of binocular stereo vision,and then the 3D coordinates of space points are measured. Experimental results show that the proposed method is of strong robustness, and the comprehensive positioning accuracy of the round hole type is high.
来源 计算机工程 ,2017,43(10):186-191,197 【扩展库】
DOI 10.3969/j.issn.1000-3428.2017.10.031
关键词 白车身 ; 被测孔槽 ; 双目立体视觉 ; 线激光光纹 ; 亚像素边缘
地址

中国科学院沈阳自动化研究所, 沈阳, 110016

语种 中文
文献类型 研究性论文
ISSN 1000-3428
学科 自动化技术、计算机技术
文献收藏号 CSCD:6084004

参考文献 共 16 共1页

1.  林忠钦. 车身覆盖件冲压成形仿真,2005 被引 57    
2.  余文超. 在线测量技术应用于白车身的生产尺寸监控. 机械设计与研究,2014(2):96-98 被引 2    
3.  刘常杰. 汽车白车身在线激光视觉检测站. 仪器仪表学报,2004,25(4):683-684 被引 1    
4.  薛婷. 三维视觉检测仪器化关键技术研究,2007 被引 1    
5.  李凌旻. 线激光扫略的白车身装配特征机器人在线检测技术研究. 测试技术学报,2014,28(3):255-263 被引 3    
6.  江荔. 基于局部标准匹配结果的本体匹配技术. 信息与控制,2016,45(1):66-72 被引 1    
7.  薛婷. 类椭圆特征自动识别及亚像素提取的完整实现. 光电子.激光,2008,19(8):1076-1078 被引 6    
8.  肖传民. 一种基于视觉显著性的边缘检测算法. 信息与控制,2014,43(1):9-13 被引 8    
9.  Ramer U. An Iterative Procedure for the Polygonal Approximation of Plane Curves. Computer Graphics and Image Processing,1972,1(3):244-256 被引 35    
10.  Bazen A M. Systematic Methods for the Computation of the Directional Fields and Singular Points of Fingerprints. IEEE Transactions on Pattern Analysis and Machine Intelligence,2002,24(7):905-919 被引 68    
11.  江永付. 线结构光光条中心亚像素精确提取方法. 激光与光电子学进展,2015,52(7):185-191 被引 3    
12.  吴恩启. 基于曲线拟合的圆锯片变形检测算法. 光电工程,2015,42(8):8-13 被引 2    
13.  孟中. 正交基函数多项式实时拟合在轴角编码器测速中的应用. 光学精密工程,2006,14(2):303-307 被引 7    
14.  Fitzgibbon A. Direct Least Squares Fitting of Ellipses. IEEE Transactions on Pattern Analysis and Machine Intelligence,1999,21(5):476-480 被引 212    
15.  Zhang Zhengyou. A Flexible New Technique for Camera Calibration. IEEE Transactions on Pattern Analysis and Machine Intelligence,2000,22(11):1330-1334 被引 1565    
16.  张晶. 工程测量中空间圆的拟合方法研究. 计量与测试技术,2011,38(9):31-32 被引 9    
引证文献 2

1 刘福 钣金件中匹配孔的半径差及轴线重合度自动检查 图学学报,2019,40(4):790-795
被引 0 次

2 郭鹏 基于拟合投影的车身老鼠洞检查方法研究 图学学报,2021,42(5):809-815
被引 0 次

显示所有2篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号