帮助 关于我们

返回检索结果

激光沉积TA15钛合金退火处理工艺及网篮组织变形机制
Annealing Treatment and Basketweave Structure Deformation Mechanism of Laser Deposition Manufactured TA15 Titanium Alloy

查看参考文献20篇

文摘 以TA15钛合金球形粉末为原料,采用激光沉积制造技术制备TA15钛合金厚壁件。通过光学显微镜(OM)、扫描电子显微镜(SEM)等方法研究了α+β两相区退火处理对TA15钛合金室温拉伸性能和显微组织的影响,并对网篮组织在拉伸过程中的变形机制进行讨论。结果表明:经α+β两相区不同温度退火后,显微组织为网篮组织或近网篮组织,退火温度对α相的形貌尺寸具有明显影响;退火后力学性能仍表现出方向上的各向异性:沉积方向上强度较低、塑性较好,而垂直沉积方向上强度高、塑性较差;粗大的层带区组织滑移变形具有"开路"作用,而柱状晶晶界对α相的滑移产生一种"固定"作用;显微硬度值随退火温度升高变化不大,显微硬度值受α相含量影响;网篮组织中的α片层组织在应力的作用下由原来近似正交方向逐渐向近似平行于应力方向变形,α片层组织的交错排列导致滑移变形时互相产生阻力;α+β两相区退火处理后的2种方向上断口形貌相似,断裂方式相同,均为韧性断裂。
其他语种文摘 TA15 titanium alloy bulk specimens were prepared by laser deposition manufacturing with spherical TA15 powder as starting material. The effects of α+β phase zone annealing treatment on microstructure and mechanical properties of laser deposition manufactured TA15 titanium alloy were studied by optical microstructure (OM) and scanning electron microscopy (SEM). Furthermore, the lamellar deformation mechanism was also discussed. The results indicate that microstructure is basketweave structure or near basketweave structure after α+β phase zone annealing treatment; pattern and size of α phase is affected effectively by annealing temperature. The mechanical properties after annealing still show the anisotropy in different directions: the strength is low and the plasticity is high in deposition direction while the strength is high and the plasticity is low in vertical deposition direction. The interlayer binding zone slip deformation plays a vanguard role and the columnar crystal grain boundary has a bound effect on α phase slip deformation. Microhardness is affected by the amount of α phase while it changes little with the increase of annealing temperature. α lamellar in basketweave structure under the stress changes from near orthogonal to near parallel to the direction of stress, and staggered arrangement of α lamellar generates resistance between each other when it is in the state of slip deformation. Both deposition direction and vertical deposition direction have same tensile fracture modes which is ductile fracture after α+β phase zone annealing treatment.
来源 稀有金属材料与工程 ,2017,46(7):1935-1942 【核心库】
关键词 激光沉积制造 ; α+β两相区 ; 退火处理 ; 显微组织 ; 力学性能
地址

沈阳航空航天大学, 航空制造工艺数字化国防重点学科实验室, 辽宁, 沈阳, 110136

语种 中文
文献类型 综述型
ISSN 1002-185X
学科 金属学与金属工艺
基金 国家自然科学基金项目 ;  国家重点研发计划项目
文献收藏号 CSCD:6039523

参考文献 共 20 共1页

1.  鹿靖. 组织形态对近α型TA15钛合金拉伸性能的影响. 金属热处理,2011,36(6):25 被引 5    
2.  薛松. TA15合金大型航空结构件成形特性与工艺研究,2011 被引 1    
3.  朱景川. 材料热处理学报,2007,28(S):106 被引 8    
4.  李士凯. 冷却速度对TA15ELI合金组织与性能的影响. 稀有金属材料与工程,2007,36(5):786 被引 8    
5.  路纲. Ti-18高温高强钛合金研制. 稀有金属,2002,26(4):271 被引 5    
6.  Liu Yong. Mechanics of Materials,2008,40(10):792 被引 8    
7.  Nobuki M. J Jpn Inst Met,1986,50(9):840 被引 9    
8.  王洋. TA15合金热变形行为研究. 机械工程材料,2006,30(11):63 被引 26    
9.  李淼泉. TA15合金的热变形行为及加工图. 稀有金属材料与工程,2006,35(9):1354 被引 26    
10.  席明哲. 激光快速成形TA15钛合金热处理组织及其力学性能. 中国激光,2012,39(1):0103007 被引 22    
11.  李萍. 热变形TA15钛合金的显微组织和室温力学性能. 稀有金属材料与工程,2016,45(6):1495 被引 8    
12.  陈石卿. 钛合金金相学,1986 被引 12    
13.  王金友. 航空用钛合金,1985 被引 96    
14.  Zhang Wangfeng. Mechanics of Materials,2010,34(1):1 被引 1    
15.  Zeng L. Materials Science and Engineering A,2005,392:403 被引 36    
16.  谢旭霞. 退火温度对激光熔化沉积TA15钛合金组织和性能的影响. 稀有金属材料与工程,2008,37(9):1510 被引 19    
17.  席明哲. 扫描方式和退火热处理对激光快速成形TA15钛合金组织与性能的影响. 稀有金属材料与工程,2014,43(2):445 被引 17    
18.  张小红. 热处理对激光立体成形TA15合金组织及力学性能的影响. 稀有金属材料与工程,2011,40(1):142 被引 30    
19.  Leyens C. Titanium and Titanium Alloys,2003:1 被引 11    
20.  张霜银. 工艺参数对激光快速成形TC4钛合金组织及成形质量的影响. 稀有金属材料与工程,2007,36(10):1839 被引 43    
引证文献 6

1 杨光 增材修复对激光沉积制造TC4组织与力学性能的影响 中国激光,2018,45(12):1202002-1-1202002-7
被引 5

2 钦兰云 循环热处理对激光复合制造TA15合金组织及性能影响 稀有金属,2020,44(2):139-146
被引 3

显示所有6篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号