帮助 关于我们

返回检索结果

小角度晶界对DD5镍基单晶高温合金力学性能的影响
Effect of Low Angle Grain Boundaries on Mechanical Properties of DD5 Single Crystal Ni-base Superalloy

查看参考文献19篇

文摘 采用籽晶法制备了二代镍基单晶高温合金DD5小角度晶界试样,研究小角度晶界对DD5合金力学性能的影响。结果表明:在870 ℃中温拉伸中,晶界角度小于16.1°时,合金抗拉强度和屈服强度无明显变化;晶界角度小于11.4°时,伸长率维持在15%以上;晶界角度大于11.4°后,伸长率开始快速下降;在980 ℃ /250 MPa持久条件下,当晶界角度小于5.1°时,持久寿命维持在140 h以上;当晶界角度大于5.1°时,持久寿命随晶界角度增大开始缓慢下降,至14.8°时,持久寿命仍保持为原来的85%;当晶界角度大于14.8°后持久寿命开始快速下降;在1093 ℃ /158 MPa持久条件下,当晶界角度小于5.1°时,持久寿命维持在30 h以上;当晶界角度大于5.1°时,持久寿命随晶界角度增大而下降。
其他语种文摘 The effects of low angle grain boundaries on the mechanical properties of second generation single crystal superalloy DD5 were investigated and the test specimens were prepared by using seeds. The results show that at 870 ℃,the yield strength and breaking strength showed no difference when the angle is below 16.1°. The elongation is higher than 15% when the angle is below 11.4°,but the elongation decreases quickly when angle is above 11.4°. At 980 ℃ /250 MPa,the rupture life is higher than 130 h when the angle is below 5.1°,and decreased slowly when the angle is above 5.1°. The rupture life still remaines 85% when the angle is 14.8°. But the rupture life decreases quickly when the angle is above 14.8°. At 1093 ℃ /158 MPa,the rupture life is higher than 30 h when the angle is below 5.1°,and decreases when the angle is above 5.1°.
来源 航空材料学报 ,2017,37(3):24-29 【核心库】
DOI 10.11868/j.issn.1005-5053.2016.000127
关键词 高温合金 ; 小角度晶界 ; 持久寿命 ; 拉伸性能
地址

北京航空材料研究院, 先进高温结构材料国防科技重点实验室, 北京, 100095

语种 中文
文献类型 研究性论文
ISSN 1005-5053
学科 金属学与金属工艺
文献收藏号 CSCD:6005813

参考文献 共 19 共1页

1.  Gell M. The development of single crystal superalloy turbine blades. Superalloys 1980,1980:205-214 被引 20    
2.  Broomfield R W. Development and turbine engine performance of three advanced rhenium containing superalloys for single crystal and directionally solidified blades and vanes. Transactions of the ASME,1998,120:596-608 被引 5    
3.  Walston W S. ReneN6: Third generation single crystal superalloy. Superalloys 1996,1996:27-34 被引 43    
4.  Harris K. Development of the rhenium containing superalloys CMSX-4 & CM186LC for single crystal blade and directionally solidified vane applications in advanced turbine engines. Superalloys 1992,1992:297-306 被引 18    
5.  Harris K. Improved single crystal superalloys CMSX-4 (SLS) [La + Y] and CMSX-486. Superalloys 2004,2004:45-52 被引 11    
6.  Yutaka K. Development of next-generation Ni-base single crystal superalloy. Superalloys 2004,2004:35-43 被引 1    
7.  Pollock T M. Grain defect formation during directional solidification of nickal base single crystals. Superalloys 1992,1992:125-134 被引 21    
8.  Tadao W. Structure-dependent grain boundary deformation and fracture at high temperatures. Materials Science and Engineering: A,2005,410:140-147 被引 6    
9.  Chen Q Z. The grain boundary microstructures of the base and modified RR2072 bicrystal superalloys and their effects on the creep properties. Materials Science and Engineering: A,2004,385:402-418 被引 23    
10.  Ross E W. Rene N4: A First generation single crystal turbine airfoil alloy with improved oxidation resistance,low angle boundary strength and superior long time rupture strength. Superalloys 1996,1996:19-25 被引 19    
11.  史振学. DD6单晶高温合金扭转小角度晶界的拉伸性能. 航空材料学报,2009,29(3):88-92 被引 4    
12.  赵金乾. 小角度晶界对单晶高温合金DD6拉伸性能的影响. 材料工程,2008(8):73-76 被引 5    
13.  崔仁杰. 980 ℃长期时效对第二代镍基单晶高温合金DD5组织与性能的影响. 材料热处理学报,2016(6):78-83 被引 2    
14.  曹亮. 晶界角度对一种镍基双晶高温合金持久性能的影响. 金属学报,2014(1):11-18 被引 10    
15.  郑运荣. Hf和Zr在高温材料中作用机理研究. 航空材料学报,2006,26(3):25-34 被引 33    
16.  郭建亭. 几种微量元素在高温合金中的作用与机理. 中国有色金属学报,2011(3):465-474 被引 28    
17.  Goldschmidt D. Porosity clusters and recrystallization in single-crystal components. Superalloys 1992,1992:155-164 被引 14    
18.  Liu L R. Microstructural evolution of a single crystal nickel-base superalloy during thermal exposure. Materials Letters,2003,57:4540-4546 被引 13    
19.  Chen Q Z. Porosity reduction by minor additions in RR2086 superalloy. Scripta Materialia,2004,51:155-160 被引 22    
引证文献 6

1 许婷 双相不锈钢中奥氏体沉淀相的晶粒取向及界面特征分布 材料工程,2018,46(2):34-40
被引 3

2 崔仁杰 热处理工艺对第二代镍基单晶高温合金DD5组织和性能的影响 材料热处理学报,2019,40(6):45-51
被引 1

显示所有6篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号