含稀土H13钢热变形行为及热加工图研究
Study on Hot Deformation Behavior and Hot Processing Map of H13 Steel Containing Rare Rarth
查看参考文献26篇
文摘
|
利用Gleeble-3800热力模拟试验机在900~1 200 ℃、0.01~10 s~(-1)的实验条件下,对含稀土 H13进行了热压缩.根据获取的流变应力曲线,建立了含稀土 H13钢的高温热变形本构方程及热加工图,并分析了变形后的金相组织.结果表明,在高应变速率下流变应力曲线说明了含稀土 H13钢具有断续再结晶行为,稀土的加入显著提升了 H13钢的应力值,经计算含稀土 H13钢的热激活能为573 kJ/mol,适宜的热加工参数为1 050~1 200 ℃、应变速率0. 01~1 s~(-1).稀土的加入拓宽了 H13钢的热加工参数范围. |
其他语种文摘
|
H13 steel containing rare earth was compressed at the temperature of 900-1 200 ℃ and the strain rate of 0. 01 - 10 s~(-1) by the Gleeble-3800 thermal-mechanical simulator. The constitutive equation and hot processing map of the rare earth H13 steel at high temperature were established according to the obtained flow stress. Meanwhile,the microstructure of the compressed specimens were analyzed by optical microscope. The flow stress showed that the rare earth H13 steel had a discontinuous dynamic recrystallization behavior at the large strain rate and the stress of the rare earth H13 was elevated obviously. The thermal activation energy of the rare earth H13 steel was 573 kJ/mol. The suitable processing parameter of the rare earth H13 steel was within 1 050—1 200 ℃ and the strain rate was within the range of 0. 01 - 0. 1 s~(-1). Therefore,the addition of rare earth has broadened the scope of the hot processing parameters. |
来源
|
材料导报
,2017,31(4B):149-155 【核心库】
|
DOI
|
10.11896/j.issn.1005-023X.2017.08.030
|
关键词
|
稀土
;
H13钢
;
流变应力
;
本构方程
;
热加工图
|
地址
|
1.
燕山大学机械工程学院, 国家冷轧板带装备及工艺工程技术研究中心;;沈阳材料科学国家(联合)实验室, 秦皇岛, 066004
2.
中国科学院金属研究所, 沈阳材料科学国家(联合)实验室, 沈阳, 110016
3.
燕山大学机械工程学院, 国家冷轧板带装备及工艺工程技术研究中心, 秦皇岛, 066004
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
1005-023X |
学科
|
金属学与金属工艺 |
基金
|
辽宁省百千万人才工程项目
;
国家自然科学基金重点项目
;
“十三五”国家重点研发计划
|
文献收藏号
|
CSCD:5973420
|
参考文献 共
26
共2页
|
1.
刘俊英. 热作模具钢的发展与应用.
工程机械,2006,37(6):48
|
被引
4
次
|
|
|
|
2.
李勇. 国内外热作模具钢的研究进展.
特殊钢,2010,31(3):20
|
被引
12
次
|
|
|
|
3.
吴晓春. 国内外热作模具钢发展现状与趋势.
模具工业,2013,39(10):1
|
被引
41
次
|
|
|
|
4.
王龙妹. 奥氏体不锈钢中稀土的作用研究及应用前景.
稀土,2005,26(5):42
|
被引
5
次
|
|
|
|
5.
Pan F. Effects of rare earth metals on steel microstructures.
Materials,2016,9(6):417
|
被引
23
次
|
|
|
|
6.
张迁. 稀土元素Ce对H13钢力学性能的影响.
模具制造,2015,15(12):85
|
被引
3
次
|
|
|
|
7.
魏东.
稀土 Ce对H13钢组织和力学性能的影响,2015
|
被引
1
次
|
|
|
|
8.
濮胜君. 稀土对H13钢固体渗硼层高温摩擦磨损性能的影响.
材料研究学报,2015,29(7):481
|
被引
7
次
|
|
|
|
9.
梁宝钱. H13钢电渣锭热变形本构模型的研究.
热处理,2010,25(6):44
|
被引
3
次
|
|
|
|
10.
王焕敏.
4Cr5MoSiV1钢热变形行为及组织研究,2012
|
被引
3
次
|
|
|
|
11.
Kang F W. Hot deformation behavior and hot processing map of 4Cr5MoSiVl steel.
Mater Sci,2013,3(1):1
|
被引
1
次
|
|
|
|
12.
张金祥. 喷射成形H13钢的高温热变形及组织演变.
热加工工艺,2014,43(20):1
|
被引
7
次
|
|
|
|
13.
Raj R. Development of a processing map for use in warm-forming and hot-forming processes.
Metall Trans A,1981,12(6):1089
|
被引
60
次
|
|
|
|
14.
Prasad Y V R K. Modelling of hot deformation for microstructural control.
Int Mater Rev,1998,43(6):243
|
被引
187
次
|
|
|
|
15.
周纪华.
金属塑性变形阻力,1989:9
|
被引
4
次
|
|
|
|
16.
Jiang X. Enhanced hot ductility of a Cr-Mo low alloy steel by rare earth cerium.
Mater Sci Eng A,2014,613:171
|
被引
11
次
|
|
|
|
17.
Momeni A. Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps.
Mater Sci Eng A,2010,527(21):5467
|
被引
67
次
|
|
|
|
18.
Jonas J J. Strength and structure under hot-working conditions.
Metall Rev,1969,14(1):1
|
被引
170
次
|
|
|
|
19.
陈雷. 2205双相不锈钢的高温变形行为.
金属学报,2010,46(1):52
|
被引
34
次
|
|
|
|
20.
姜茂发. 钢中稀土与铌、钒、钛等微合金元素的相互作用.
稀土,2003,24(5):1
|
被引
26
次
|
|
|
|
|