帮助 关于我们

返回检索结果

大型射电望远镜天线主动面补偿研究进展
Development of active surface technology of large radio telescope antennas

查看参考文献72篇

王从思 1 *   肖岚 1   项斌斌 1   王伟 1   许谦 2   蒋力 3   王娜 2   段宝岩 1  
文摘 随着射电望远镜全可动天线的口径扩大与频段提升,天线在观测时的高电性能难以保障,必须采用机械补偿与电子补偿等手段.为确保天线的指向精度与作用距离,有必要对天线赋形反射面的空间位置与几何形状进行调整,即主动面调整,这是补偿天线电性能最有效的手段.为此,本文阐述了国内外有关主动面补偿的应用情况,总结了大型天线主动面补偿的基本原理及适用范围,详细分析了面形调整量计算、主面分块设计、促动器设计、主动面控制系统及面形检测五项关键技术,并对世界上已采用主动主反射面调整的四部大天线进行了对比讨论,最后给出了主动面补偿技术在未来大型射电望远镜天线上的研究方向.
其他语种文摘 Aperture expanding and frequency upgrading of full steerable antennas make the electrical performance of the antennas difficult to guarantee, and that radio telescopes operate in a complex environment, so it has to improve the performance by some methods like mechanical or electronic compensation. To control the pointing accuracy and the detecting distance of antennas, we must adjust the position and the surface shape of shaped reflectors, in another word, the active surface adjustment is the most effective way. Therefore, this article describes the situation and status of applications of active surface adjustment. Then, it summarizes the basic principle and the applications of active surface adjustment and particularly analyzes the key technologies which include the calculation of actuator movement, the block design of main surface, the actuator design, the active surface control system and the surface profile measuring. The comparisons among four large radio telescopes of the world are discussed, which have used active surface technology. At last, it points out some suggestions on the future research of active surface technology of large radio telescopes such as QTT.
来源 中国科学. 物理学 , 力学, 天文学,2017,47(5):059503-1-059503-16 【核心库】
DOI 10.1360/SSPMA2017-00011
关键词 射电望远镜 ; 天线反射面 ; 主动调整 ; 机电耦合 ; 性能补偿
地址

1. 西安电子科技大学, 电子装备结构设计教育部重点实验室, 西安, 710071  

2. 中国科学院新疆天文台, 乌鲁木齐, 830011  

3. 中国电子科技集团公司第三十九研究所, 西安, 710065

语种 中文
文献类型 综述型
ISSN 1674-7275
学科 机械、仪表工业
基金 国家973计划 ;  国家自然科学基金 ;  陕西省青年科技新星计划 ;  国家教育部高等学校学科创新引智计划项目 ;  中央高校基本科研业务费专项资金
文献收藏号 CSCD:5967525

参考文献 共 72 共4页

1.  Rahmat-Samii Y. Reflector antenna developments: A perspective on the past, present and future. IEEE Antennas Propag Mag,2015,57:85-95 被引 13    
2.  Rusch W V T. The current state of the reflector antenna art. IEEE Trans Antennas Propag,1984,32:313-329 被引 1    
3.  杜彪. 大口径反射面天线技术综述. 无线电通信技术,2016,42:1-8 被引 15    
4.  Karcher H J. Ideas for future large single dish radio telescopes. Proceedings of Ground-Based and Airborne Telescopes V,2014 被引 1    
5.  施浒立. 我国大天线的新进展. 电子机械工程,2004,20:21-24 被引 1    
6.  Von Hoerner S. Design of large steerable antennas. Astron J,1967,72:35-47 被引 8    
7.  Gawronski W. Control and pointing challenges of antennas and telescopes. Proceedings of American Control Conference,2005:175-178 被引 1    
8.  Duan B Y. Reflector antenna distortion analysis using MEFCM. IEEE Trans Antennas Propag,2009,57:3409-3413 被引 25    
9.  Imbriale W A. Gravity Deformation Measurements of NASA's Deep Space Network 70-Meter Reflector Antennas. Progress Report,2001 被引 1    
10.  王从思. 反射面天线机电场耦合关系式及其应用. 电子学报,2011,39:1431-1435 被引 4    
11.  Griffith P. Thermal Design of The Large Millimeter Telescope (LMT) and Expected Accuracy of Temperatures from Measurements. Technical Report,1997 被引 2    
12.  Rahmat-Samii Y. An efficient computational method for characterizing the effects of random surface errors on the average power pattern of reflectors. IEEE Trans Antennas Propag,1983,31:92-98 被引 22    
13.  Wang M. A practical approach to evaluate the effects of machining errors on the electrical performance of reflector antennas based on paneled forms. Antennas Wirel Propag Lett,2014,13:1341-1344 被引 7    
14.  Mobrem M. Methods of analyzing surface accuracy of large antenna structures due to manufacturing tolerances. Proceedings of the 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference,2003 被引 2    
15.  Ruze J. Antenna tolerance theory-A review. Proc IEEE,1966,54:633-640 被引 55    
16.  Grahl B H. Improvement of the Effelsberg 100-meter telescope based on holographic reflector surface measurement. Astron Astrophys,1986,167:390-394 被引 2    
17.  张萍. 大口径射电望远镜结构的保型设计. 电子机械工程,2014,6:43-46 被引 1    
18.  Cowles P R. Reflector surface error compensation in Cassegrain antennas. IEEE Trans Antennas Propag,1975,23:323-328 被引 1    
19.  Xu S. Subreflectarrays for reflector surface distortion compensation. IEEE Trans Antennas Propag,2009,57:364-372 被引 7    
20.  Srikanth S. Gain Reduction Due to Gravity-Induced Deflections of the GBT Tipping Structure and Its Compensation. Technical Report,1994 被引 1    
引证文献 9

1 项斌斌 QTT高精度位移促动器设计与测试 中国科学. 物理学, 力学, 天文学,2019,49(9):099505
被引 0 次

2 王从思 基于角度传感器的大口径射电望远镜面板实时位置计算方法 中国科学. 物理学, 力学, 天文学,2019,49(9):099506
被引 0 次

显示所有9篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号