高精度平面子孔径拼接算法研究
Research on High Accuracy Sub-Aperture Stitching Algorithm for Flat Optics
查看参考文献19篇
文摘
|
对平面子孔径拼接累积误差的理论分析及数值仿真表明,参考镜面形的拼接重叠区域的局部斜率差和直流偏差是产生累积误差的原因。为了提高大口径平面光学元件子孔径拼接检测精度,提出一种简单有效的可以减小子孔径拼接测量累积误差的方法,该方法采用第4项和第6项泽尼克像差拟合一个假设的准参考镜面形,再从每个子孔径测量结果中减去,最后拼接合成全口径面形。对450 mmX60 mm的平面镜进行了8个子孔径的拼接检测,去除准参考镜面形前后,拼接测量结果与Zygo公司24英寸(600 mm)口径干涉仪检测结果的偏差峰谷(PV)值从λ/7减小至λ/100。所拟合的准参考镜面形误差为0.02λ(PV值),与标准镜的面形误差为同一量级,其对每个子孔径测量结果的影响可以忽略。实验结果表明,本文方法能够有效控制拼接累积误差,提高拼接检测精度。 |
其他语种文摘
|
Theoretical analysis and numerical simulation on the error accumulation in sub-aperture stitching for flat optics show that the slope and piston difference of the surface figure of the reference flat in the overlap region lead to error accumulation. In order to improve the measurement accuracy of the stitching interferometer for large aperture flat optics, a simple and effective method is proposed to reduce the accumulated error of the sub-aperture stitching measurements. The 4th and 6th Zernike aberration are used to synthesize the virtual reference flat. Sub-apertures with the virtual reference surface figure removed are stitched together to obtain a full aperture surface figure. A flat mirror with aperture of 450 mm X 60 mm is tested by 8 sub-apertures. The deviation between the stitching result and the test result of a Zygo 24 inch (600 mm) interferometer peak-valley (PV) value is reduced from A/7 to A/100 after removing the virtual reference surface figure. The flatness of the virtual reference surface is 0.02 λ (PV value), which is comparable to the real figure of the reference flat. The influence of removing of virtual reference surface on the measurement results of each sub-aperture can also be ignored. Experimental results show that the accumulated error is controlled effectively and the measurement accuracy is evidently improved by the proposed method. |
来源
|
中国激光
,2016,43(11):1104002-1-1104002-10 【核心库】
|
DOI
|
10.3788/CJL201643.1104002
|
关键词
|
测量
;
干涉测量
;
大口径平面镜
;
子孔径拼接
;
误差累积
|
地址
|
中国科学院上海光学精密机械研究所信息光学与光电技术实验室, 上海, 201800
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0258-7025 |
学科
|
物理学 |
基金
|
国家自然科学基金
;
中国科学院青年创新促进会项目
|
文献收藏号
|
CSCD:5864928
|
参考文献 共
19
共1页
|
1.
Kin C J. Subaperture test of a large flat or a fast aspheric surface.
J Opt Soc Am,1981,71:1587
|
被引
1
次
|
|
|
|
2.
Thunen J G. Full aperture testing with subaperture test optics.
SPIE, 351,1983:19-27
|
被引
2
次
|
|
|
|
3.
Chow W W. Method for subaperture testing interferogram reduction.
Optics Letters,1983,8(9):468-470
|
被引
21
次
|
|
|
|
4.
Stuhlinger T W. Subaperture optical testing: Experimental verification.
SPIE, 655,1986:350-359
|
被引
1
次
|
|
|
|
5.
Otsubo M. Measurement of large plane surface shapes by connecting small-aperture interferograms.
Optical Engineering,1994,33(2):608-613
|
被引
44
次
|
|
|
|
6.
Bray M. Stitching interferometer for large optics using a standard interferometer: Description of an automated system.
SPIE, 3047,1997:911-918
|
被引
2
次
|
|
|
|
7.
Murphy P. Stitching interferometry: A flexible solution for surface metrology.
Optics and Photonics News,2003,14(5):38-43
|
被引
15
次
|
|
|
|
8.
King C W. An automated metrology workstation for the measurement of large convex surfaces.
Optical Society of America,2014:OTh3B. 2
|
被引
1
次
|
|
|
|
9.
King C W. Development of ametrology workstation for full-aperture and sub-aperture stitching measurements.
Procedia CIRP,2014,13:359-364
|
被引
2
次
|
|
|
|
10.
Chen M. Multiaperture overlap-scanning technique for large-aperture test.
SPIE, 1553,1992:626-635
|
被引
1
次
|
|
|
|
11.
Wang Q. New technique for testing large optical flat.
SPIE, 2003,1993:389-397
|
被引
3
次
|
|
|
|
12.
白剑. 子孔径检测及拼接的目标函数分析法.
光学仪器,1997,19(4):36-39
|
被引
6
次
|
|
|
|
13.
张蓉竹. 子孔径拼接干涉检测实验研究.
光学技术,2004,30(2):173-175
|
被引
21
次
|
|
|
|
14.
陈一巍. 基于变换的子孔径拼接新算法.
光学学报,2013,33(9):091204
|
被引
1
次
|
|
|
|
15.
王孝坤. 大口径碳化硅反射镜面形子孔径拼接干涉检测.
激光与光电子学进展,2013,50(5):051202
|
被引
5
次
|
|
|
|
16.
Bray M. Stitching interferometry and absolute surface shape metrology: Similarities.
SPIE, 4451,2001:375-383
|
被引
1
次
|
|
|
|
17.
Su P. Application of maximum likelihood reconstruction of subaperture data for measurement of large flat mirrors.
Applied Optics,2010,49(1):21-31
|
被引
9
次
|
|
|
|
18.
苗二龙. 高精度平面绝对标定.
激光与光电子学进展,2014,51(5):051203
|
被引
4
次
|
|
|
|
19.
李永. 一种降低平面子孔径拼接累积误差的方法.
中国激光,2015,42(7):0708006
|
被引
6
次
|
|
|
|
|