可变结构体机器人滚动步态参数优化
Parameter Optimization for Rolling Motion of Structure Variable Robots
查看参考文献14篇
文摘
|
可变结构体机器人是一种基于张拉整体结构设计的新型移动机器人,由刚度较大的压杆和弹性较大的拉索构成,利用自身形变产生滚动。然而由于缺乏必要的参数分析,目前其结构设计多基于经验,滚动控制往往采用固定驱动参数,未考虑材料参数与驱动参数对机器人易滚动性、能耗、结构可靠性等特性的影响;而张拉整体结构内力耦合度高,传统动力学分析参数影响极其复杂。因此,为获得低能耗、易滚动且结构可靠的可变结构体机器人,将重力矩、临界驱动长度和驱动力作为性能参数,描述可变结构体机器人的上述三项性能。通过有限元法分析方法,建立驱动参数、材料参数与三项性能参数的关系。在此基础上,提出参数优化方案,指导参数选择。通过试验验证结果的正确性。 |
其他语种文摘
|
Structure variable Robots are proposed as novel mobile robots based on tensegrity structures. They consist of rigid struts and tensile cables and can generate rolling gaits by self-deformation. Recent designs for tensegrity robots are mostly based on experience, and fixed drive parameters are used in the rolling control. The influence of the diving parameters and material parameters on the performance (such as rollability, energy consumption, and structure reliability) is necessarily but has not been discussed, since the tensegrity structures are highly coupled and the analysis based on the traditional kinetic methods are complex. For obtaining low energy consumption, high rollability and high reliability, the gravitational torque, critical driving length and driving force are used as performance criteria to describe three performances, and then the finite element method is applied to find out the relation between the driving parameters, material parameters and the three performance criteria, and optimal parameters are chosen to obtain better performance. A 6-strut tensegrity robot platform is built and experiments have been taken on this robot to test the validity of the computational results. |
来源
|
机械工程学报
,2016,52(17):127-136 【核心库】
|
DOI
|
10.3901/jme.2016.17.127
|
关键词
|
驱动参数
;
材料参数
;
性能参数
;
可变结构体机器人
|
地址
|
1.
中国科学院沈阳自动化研究所, 机器人学国家重点实验室, 沈阳, 110016
2.
日本立命馆大学机器人系, 日本, 滋贺, 525-8577
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0577-6686 |
学科
|
金属学与金属工艺 |
基金
|
国家自然科学基金资助项目
|
文献收藏号
|
CSCD:5798690
|
参考文献 共
14
共1页
|
1.
Duan Xingguang. DEVELOPMENT AND MOTION ANALYSIS OF MINIATURE WHEEL-TRACK-LEGGED MOBILE ROBOT.
Chinese Journal of Mechanical Engineering,2007,20(3):24-28
|
被引
8
次
|
|
|
|
2.
Ye Changlong. DEVELOPMENT OF A SHAPE-SHIFTING MOBILE ROBOT FOR URBAN SEARCH AND RESCUE.
Chinese Journal of Mechanical Engineering,2008,21(2):31-35
|
被引
9
次
|
|
|
|
3.
曹玉君. 软体机器人研究现状综述.
机械工程学报,2012,48(3):25-33
|
被引
50
次
|
|
|
|
4.
Fuller R B.
Tensile-integrity structures:USA,3063521,1962
|
被引
1
次
|
|
|
|
5.
Paul C. Gait production in a tensegrity based robot.
International Conference on Advanced Robotics,Seattle Sheraton Hotel & Towers,Seattle,WA,2005:216-222
|
被引
1
次
|
|
|
|
6.
Paul C. Redundancy in the control of robots with highly coupled mechanical structures.
IEEE/RSJ International Conference on Intelligent Robots and Systems,2005:1-4
|
被引
1
次
|
|
|
|
7.
Paul C. Design and control of tensegrity robots for locomotion.
IEEE Transactions on Robotics,2006,22(5):944-957
|
被引
5
次
|
|
|
|
8.
Tur J M M. Dynamic equations of motion for a 3-bar tensegrity based mobile robot.
IEEE Conference on Emerging Technologies and Factory Automation,September 25-28,University Patras,Greece,2007:1334-1339
|
被引
1
次
|
|
|
|
9.
Rovira A G. Control and simulation of a tensegrity-based mobile robot.
Robotics and Autonomous Systems,2009,57(5):526-535
|
被引
7
次
|
|
|
|
10.
Shibata M. Crawling by body deformation of tensegrity structure robots.
International Conference on Robotics and Automation,2009:3617-3622
|
被引
1
次
|
|
|
|
11.
Koizumi Y. Rolling tensegrity driven by pneumatic soft actuators.
International Conference on Robotics and Automation,2012:1988-1993
|
被引
1
次
|
|
|
|
12.
杜汶娟. 可变结构体机器人形变状态找寻及运动方向预测方法.
科学通报,2013,58(增刊II):97-103
|
被引
2
次
|
|
|
|
13.
Juan S H. Tensegrity frameworks:Static analysis review.
Mechanism and Machine Theory,2008,43(7):859-881
|
被引
14
次
|
|
|
|
14.
楚中毅. 机器人动力学分析的等效有限元建模方法.
机械工程学报,2005,41(6):13-18
|
被引
4
次
|
|
|
|
|