帮助 关于我们

返回检索结果

扭曲椭圆管在MVR系统降膜蒸发器上的应用研究
Practical research on twisted elliptical tube in the falling film evaporator of MVR system

查看参考文献7篇

文摘 传统降膜蒸发器的体积和质量过大,耗材多,实际应用效果差。文中通过理论计算与CFD数值模拟方法对比分析了扭曲椭圆管与直圆管在降膜式蒸发器中的差别,使得这2种办法相互验证了结论的可靠性。文中主要分析采用扭曲椭圆管降膜蒸发器的管侧与壳侧的传热膜系数在不同关键参数影响下优于直圆管的现象,并且剖析关键参数与传热膜系数之间的内在关系,总结了扭曲椭圆管的应用规律。结果显示扭曲椭圆管的管侧传热膜系数与壳侧传热膜系数和整体压降均优于直圆管,具有重要的工程应用价值。
其他语种文摘 The traditional falling film evaporators had excessive volume and mass, which consumed expensive materials and performed badly in practical application. By the method of theoretical calculation and CFD numerical stimulation, the coefficients of tube-side and shell-side heat transfer between the twisted elliptical tube and plain tube in the falling film evaporator were compared and analyzed. The reliability of the conclusion was verified by the above methods. The phenomenon that falling film evaporator with twisted elliptical tubes was better than the one with plain tube in terms of the heat transfer coefficients of shell-side and tube-side under various critical parameters was analyzed. Additionally, the internal relationship between critical parameters and heat transfer coefficients was also considered. Finally, the application rules of twisted elliptical tubes were summarized. The results show that the twisted elliptical tube are better than the circle tube on the heat transfer coefficient as well as the overall pressure drop of tube-side and shell-side heat transfer. In all, this kind of structure is valuable in the industrial application.
来源 化学工程 ,2016,44(9):24-28 【核心库】
DOI 10.3969/j.issn.1005-9954.2016.09.005
关键词 降膜蒸发器 ; 扭曲椭圆管 ; CFD数值模拟 ; 传热膜系数
地址

中国科学院广州能源研究所, 广东, 广州, 510640

语种 中文
文献类型 研究性论文
ISSN 1005-9954
学科 能源与动力工程
基金 科技型中小企业创新基金专项目 ;  佛山市院市合作项目 ;  广东省2013年"扬帆计划"引进创新创业团队资助
文献收藏号 CSCD:5791641

参考文献 共 7 共1页

1.  何睦盈. 机械蒸汽再压缩(MVR)技术的发展及应用. 广东化工,2013,40(17):115-116 被引 8    
2.  史晓平. 竖管降膜蒸发器的布料装置. 化学工程,1990,18(4):14-18 被引 5    
3.  夏清. 化工原理,2005:226-227 被引 1    
4.  施林德尔E U. 换热器设计手册:第三卷,1989:85-89 被引 1    
5.  Numrich R. Heat transfer in turbulent falling films. Chemical Engineering & Technology,1995,18:171-177 被引 1    
6.  孙凤丹. 换热器中单管流动和传热的CFD模拟,2012 被引 1    
7.  郑伟业. 蒸发式冷却器传热传质的实验研究及数值模拟,2013 被引 1    
引证文献 4

1 刘世杰 三维变形管换热器在压缩机中间冷却器中的应用研究 热能动力工程,2018,33(12):26-29,64
被引 1

2 林成迪 扭曲椭圆管内降膜蒸发特性研究 化学工程,2019,47(11):39-43,49
被引 1

显示所有4篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号