飞秒激光金属着色颜色差分析
Color Difference Analysis of Femtosecond Laser Colorized Metals
查看参考文献18篇
文摘
|
利用飞秒激光聚焦辐照金属表面可以诱导出亚波长周期结构,从而实现金属表面着色.改变照明光入射角和样品水平旋转角,金属表面结构色的色调和亮度均发生变化,这说明结构成色具有方向性.为探究飞秒激光在金属表面着色的均匀性,基于国际光学照明委员会关于颜色差的规定对成色的偏差作了分析,结果表明,样品加工面积越大,颜色的均匀性越差.在设定的实验参数下,当样品加工面积达到64mm~2时,其边缘与中心颜色的差异可以被人眼明显察觉.通过制作两个彩色图标来展示结构色的方向性和均匀性对飞秒激光彩色标记实际应用的影响. |
其他语种文摘
|
Femtosecond lasers focused on metal surfaces can induce subwavelength periodic structures,which can make metal surfaces colorize.The hue and brightness of the structural colors vary with the incident angle of illumination and sample rotation angle,which indicates the structural color has directional property.In order to investigate the uniformity of femtosecond laser colorization on metal surfaces,based on the color system of International Commission on Illumination the color deviation is analyzed.The results show that the larger the processing area is,the worse the color uniformity is.With the specified experimental parameters,when the processing area of sample reaches to 64 mm~2,the difference between edge color and center color is obvious to human eyes.Two colorized icons are made to demonstrate the effects of the directionality and uniformity of structural colorization on the practical application of femtosecond laser color marking. |
来源
|
光学学报
,2016,36(7):0714003-01-0714003-05 【核心库】
|
DOI
|
10.3788/AOS201636.0714003
|
关键词
|
激光光学
;
直写技术
;
结构色
;
飞秒激光
|
地址
|
中国科学院上海光学精密机械研究所, 强场激光物理国家重点实验室, 上海, 201800
|
语种
|
中文 |
文献类型
|
研究性论文 |
ISSN
|
0253-2239 |
学科
|
电子技术、通信技术 |
基金
|
国家自然科学基金
|
文献收藏号
|
CSCD:5764959
|
参考文献 共
18
共1页
|
1.
Birnbaum M. Semiconductor surface damage produced by ruby lasers.
Journal of Applied Physics,1965,36(11):3688-3689
|
被引
53
次
|
|
|
|
2.
Buividas R. Surface and bulk structuring of materials by ripples with long and short laser pulses: Recent advances.
Progress in Quantum Electronics,2014,38(3):119-156
|
被引
12
次
|
|
|
|
3.
唐延甫. 偏振激光诱导金属表面周期条纹结构机理的研究.
中国激光,2015,42(7):0702002
|
被引
7
次
|
|
|
|
4.
王浩竹. 飞秒激光在金属钼表面诱导产生纳米量级周期条纹结构的研究.
中国激光,2015,42(1):0103001
|
被引
6
次
|
|
|
|
5.
王积翔. 飞秒激光在硅表面诱导微结构.
光学学报,2014,34(s1):s114002
|
被引
4
次
|
|
|
|
6.
彭丽勇. 0Cr18Ni9不锈钢飞秒激光烧蚀特性的研究.
激光与光电子学进展,2014,51(7):071401
|
被引
2
次
|
|
|
|
7.
Tan D Z. Femtosecond laser induced phenomena in transparent solid materials: Fundamentals and applications.
Progress in Materials Science,2016,76:154-228
|
被引
18
次
|
|
|
|
8.
薛军. 飞秒激光诱导自组织纳米光栅偏振散射特性研究.
光学学报,2014,34(4):0432001
|
被引
5
次
|
|
|
|
9.
Huang M. Origin of laser-induced near-subwavelength ripples:Interference between surface plasmons and incident laser.
Acs Nano,2009,3(12):4062-4070
|
被引
62
次
|
|
|
|
10.
Dufft D. Femtosecond laser-induced periodic surface structures revisited:A comparative study on ZnO.
Journal of Applied Physics,2009,105(3):034908
|
被引
22
次
|
|
|
|
11.
Vorobyev A Y. Direct femtosecond laser surface nano/microstructuring and its applications.
Laser & Photonics Reviews,2013,7(3):385-407
|
被引
53
次
|
|
|
|
12.
Vorobyev A Y. Brighter light sources from black metal:Significant increase in emission efficiency of incandescent light sources.
Physical Review Letters,2009,102(23):234301
|
被引
22
次
|
|
|
|
13.
Dusser B. Controlled nanostructrures formation by ultra fast laser pulses for color marking.
Optics Express,2010,18(3):2913-2924
|
被引
30
次
|
|
|
|
14.
Brueck S R J. Stimulated surface-plasma-wave scattering and growth of a periodic structure in laserphotodeposited metal films.
Physical Review Letters,1982,48(24):1678-1681
|
被引
4
次
|
|
|
|
15.
Sakabe S. Mechanism for self-formation of periodic grating structures on a metal surface by a femtosecond laser pulse.
Physical Review B,2009,79(3):033409
|
被引
16
次
|
|
|
|
16.
Bonch-Bruevich A M. Surface electromagnetic waves in optics.
Optical Engineering,1992,31(4):718-730
|
被引
13
次
|
|
|
|
17.
Skowronski L. Optical properties of laser induced oxynitride films on titanium.
Applied Surface Science,2014,304:107-114
|
被引
6
次
|
|
|
|
18.
Antonczak A J. Laser-induced colour marking-sensitivity scaling for a stainless steel.
Applied Surface Science,2013,264:229-236
|
被引
7
次
|
|
|
|
|