Al-3.4%Bi合金定向凝固组织形成过程
Microstructure Evolution of Directionally Solidified Al-3.4%Bi Alloy
查看参考文献18篇
|
文摘
|
对Al-3.4%Bi (质量分数)偏晶点成分合金开展了定向凝固实验,并对其凝固组织形成过程进行分析.结果表明,Al-Bi偏晶点成分合金定向凝固时在凝固界面前沿液相内形成溶质Bi富集层,并在该区域内发生液液相变.当试样凝固速度较慢时,合金凝固后弥散相粒子尺寸呈现双峰分布;当凝固速度较快时,凝固界面前沿所有尺寸的少量相液滴均向凝固界面迁移,合金凝固后弥散相粒子尺寸呈现单峰分布. |
|
其他语种文摘
|
Directional solidification experiments are carried out with Al-3.4%Bi alloy and the microstructure evolution mechanism is investigated. The results demonstrate that a solute-rich layer forms in front of the solidification interface and the liquid-liquid decomposition occurs at the same region. When the alloy is solidified at a relatively low velocity, the size distribution of the minority phase particles shows two peaks. When the alloy is solidified at a high velocity so that the minority phase droplets of all sizes in front of the solidification interface migrate to the solidification interface, the size distribution of the minority phase particles shows only one peak. |
|
来源
|
空间科学学报
,2016,36(4):450-454 【核心库】
|
|
DOI
|
10.11728/cjss2016.04.450
|
|
关键词
|
偏晶合金
;
定向凝固
;
凝固组织
|
|
地址
|
中国科学院金属研究所, 沈阳, 110016
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0254-6124 |
|
学科
|
航天(宇宙航行) |
|
基金
|
载人航天工程项目
;
国家自然科学基金项目
|
|
文献收藏号
|
CSCD:5752233
|
参考文献 共
18
共1页
|
|
1.
Ratke L. Liquid immiscible alloys.
Mater. Sci. Eng,1995,15:263-347
|
被引
62
次
|
|
|
|
|
2.
Rudrakshi G B. Spray forming and wear characteristics of liquid immiscible alloys.
J. Mater. Proc. Technol,2007,189(1/2/3):224-230
|
被引
5
次
|
|
|
|
|
3.
Pratt G C. Materials for plain bearings.
Int. Met. Rev,1973,18:62-88
|
被引
9
次
|
|
|
|
|
4.
Terizieff P. Magnetic investigations in liquid Al-In.
J. Alloys Compd,2003,360(1/2):205-209
|
被引
11
次
|
|
|
|
|
5.
Wang C P. Formation of immiscible alloy powders with egg-type microstructure.
Science,2002,297:990-993
|
被引
70
次
|
|
|
|
|
6.
Sun Z B. Liquid and solid phase separation during melt spinning and annealing in melt-spun Cu-Cr ribbons.
Mater. Sci. Eng,2007,452/453:411-416
|
被引
1
次
|
|
|
|
|
7.
Andrews J B. Microgravity solidification of immiscible alloys.
Mat. Res. Soc. Symp. Proc,1999,551:255-265
|
被引
1
次
|
|
|
|
|
8.
Neumann H. Investigation of Marangoni convection in monotectic melts by resistance measurements.
Mater. Sci. Eng,2003,361:155-164
|
被引
1
次
|
|
|
|
|
9.
Huang Q. An alloy solidification experiment conducted on Shenzhou spacecraft.
Adv. Space Res,2005,36:86-91
|
被引
14
次
|
|
|
|
|
10.
Rudrakshi G B. Spray forming of Al-Si-Pb alloys and their wear characteristics.
Mater. Sci. Eng,2004,383:30-38
|
被引
13
次
|
|
|
|
|
11.
Zhao J Z. Formation of the minor phase shell on the surface of hypermonotectic alloy powders.
Scripta Mater,2006,54:247-250
|
被引
21
次
|
|
|
|
|
12.
Dai R R. Formation of core-type microstructure in Al-Bi monotectic alloys.
Mater. Lett,2011,65:322-325
|
被引
7
次
|
|
|
|
|
13.
Jiang H X. Effect Mechanism of a Direct Current on the Solidification of Immiscible Alloys.
Chin. Phys. Lett,2012,29:088104
|
被引
10
次
|
|
|
|
|
14.
张林. 强磁场对Cu-80％Pb过偏晶合金凝固组织的影响.
金属学报,2008,44:165-171
|
被引
25
次
|
|
|
|
|
15.
王江. 电磁复合场制备匀质Zn-Bi偏晶合金的物理模拟.
物理学报,2011,60:076101
|
被引
4
次
|
|
|
|
|
16.
Wang C P. Design and formation mechanism of self-organized core/shell structure composite powder in immiscible liquid system.
Appl. Phys. Lett,2007,91:141904
|
被引
11
次
|
|
|
|
|
17.
Li H L. Convective effect on the microstructure evolution during a liquid-liquid decomposition.
Appl. Phys. Lett,2008,92:241902
|
被引
17
次
|
|
|
|
|
18.
杨志增. Al-Bi偏晶点成分合金定向凝固过程研究.
金属学报,2014,50:25-31
|
被引
8
次
|
|
|
|
|
了解气象卫星更多信息，请访问