基于混合方法的二维水力压裂数值模拟
NUMERICAL SIMULATION OF HYDRAULIC FRACTURING BY A MIXED METHOD IN TWO DIMENSIONS
查看参考文献34篇
|
文摘
|
水力压裂在页岩气开采中被广泛使用,采用数值方法研究压裂机理具有重要意义.基于连续-非连续单元法(CDEM)和中心型有限体积法(FVM),提出解决水力压裂流固耦合问题的二维混合数值计算模型.该混合模型中,使用CDEM求解应力场和裂缝扩展过程,使用FVM求解裂隙渗流场.应力场、裂缝扩展和渗流场均使用显式迭代求解,并通过相互之间数据交换实现流固耦合.通过与KGD理论模型进行对比,验证数值模型的正确性.通过与颗粒离散元数值结果进行对比,验证数值模型的有效性.通过计算复杂缝网压裂模型,研究水力压裂机理,并说明该数值模型在水力压裂模拟中具有很好的前景. |
|
其他语种文摘
|
Hydraulic fracturing is widely used in exploitation of shale gas nowadays. It is of great significance to study the mechanism of fracturing process by numerical simulations. We present a mixed numerical model to solve hydraulic fracturing problems based on Continuous-Discontinuous Element Method (CDEM) and Finite Volume Method (FVM). In the mixed model, the CDEM is used for analysis of stress field and fracture propagation, and the FVM is used for analysis of pressure field in fracture. The three fields are all solved by explicit schemes and the coupling of them is implemented through data exchange. The model is verified against the classic KGD analytical solutions. Thereafter, it is validated by the results from a distinct element simulation. Finally, a hydraulic fracturing example related to complex fracture network is studied on the mechanism of fracturing process. The example shows bright future of the mixed numerical model for simulation and mechanism study of hydrauling fracturing. |
|
来源
|
力学学报
,2015,47(6):973-983 【核心库】
|
|
DOI
|
10.6052/0459-1879-15-097
|
|
关键词
|
水力压裂
;
数值模拟
;
连续-非连续单元法
;
有限体积法
;
页岩气开采
;
复杂裂缝网络
|
|
地址
|
中国科学院力学研究所, 北京, 100190
|
|
语种
|
中文 |
|
文献类型
|
研究性论文 |
|
ISSN
|
0459-1879 |
|
学科
|
建筑科学 |
|
基金
|
中国科学院战略性先导科技专项
;
国家自然科学基金
|
|
文献收藏号
|
CSCD:5579828
|
参考文献 共
34
共2页
|
|
1.
Gregory K B. Water management challenges associated with the production of shale gas by hydraulic fracturing.
Elements,2011,7(3):181-186
|
被引
53
次
|
|
|
|
|
2.
华油能源集团.
连续油管水力喷砂压裂,2015
|
被引
1
次
|
|
|
|
|
3.
Legarth B. Hydraulic fracturing in a sedimentary geothermal reservoir: Results and implications.
International Journal of Rock Mechanics and Mining Sciences,2005,42(7):1028-1041
|
被引
8
次
|
|
|
|
|
4.
Simoni L. Cohesive fracture mechanics for a multi-phase porous medium.
Engineering Computations,2003,20(5/6):675-698
|
被引
5
次
|
|
|
|
|
5.
Rubin A M. Propagation of magma-filled cracks.
Annual Review of Earth and Planetary Sciences,1995,23:287-336
|
被引
9
次
|
|
|
|
|
6.
Perkins T K. Widths of hydraulic fractures.
Journal of Petroleum Technology,1961,13(9):937-949
|
被引
42
次
|
|
|
|
|
7.
Nordgren R P. Propagation of a vertical hydraulic fracture.
SPE Journal,1972,12(4):306-314
|
被引
40
次
|
|
|
|
|
8.
Geertsma J. Rapid method of predicting width and extent of hydraulically induced fractures.
Journal of Petroleum Technology,1969,21:1571-1581
|
被引
46
次
|
|
|
|
|
9.
Settari A. Development and testing of a pseudo-three-dimensional model of hydraulic fracture geometry.
SPE Production Engineering,1986,1(6):449-466
|
被引
10
次
|
|
|
|
|
10.
Siebrits E. An efficient multi-layer planar 3D fracture growth algorithm using a fixed mesh approach.
International Journal for Numerical Methods in Engineering,2002,53(3):691-717
|
被引
5
次
|
|
|
|
|
11.
Crouch S L.
Boundary Element Methods in Solid Mechanics,1990
|
被引
3
次
|
|
|
|
|
12.
Lecampion B. An implicit algorithm for the propagation of a hydraulic fracture with a fluid lag.
Computer Methods in Applied Mechanics and Engineering,2007,196:4863-4880
|
被引
5
次
|
|
|
|
|
13.
Lecampion B. An extended finite element method for hydraulic fracture problems.
Communications in Numerical Methods in Engineering,2009,25:121-133
|
被引
32
次
|
|
|
|
|
14.
Dahi-Taleghani A.
Analysis of hydraulic fracture propagation in fractured reservoirs: an improved model for the interaction between induced and natural fractures. [PhD Thesis],2009
|
被引
1
次
|
|
|
|
|
15.
Hunsweck M J. A finite element approach to the simulation of hydraulic fractures with lag.
International Journal for Numerical and Analytical Methods in Geomechanics,2013,37(9):993-1015
|
被引
14
次
|
|
|
|
|
16.
Carrier B. Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model.
Engineering Fracture Mechanics,2012,79:312-328
|
被引
29
次
|
|
|
|
|
17.
Chen Z. Cohesive zone finite element-based modeling of hydraulic fractures.
Acta Mechanica Solida Sinica,2009,22(5):443-452
|
被引
15
次
|
|
|
|
|
18.
Wang S Y. 2D-numerical analysis of hydraulic fracturing in heterogeneous geo-materials.
Construction and Building Materials,2009,23(6):2196-2206
|
被引
12
次
|
|
|
|
|
19.
Wangen M. Finite element modeling of hydraulic fracturing on a reservoir scale in 2D.
Journal of Petroleum Science and Engineering,2011,77(3):274-285
|
被引
8
次
|
|
|
|
|
20.
Wangen M. Finite element modeling of hydraulic fracturing in 3D.
Computational Geosciences,2013,17(4):647-659
|
被引
5
次
|
|
|
|
|
了解气象卫星更多信息，请访问