双光子聚合3D打印
3D printing technology based on two-photon polymerization
查看参考文献45篇
|
文摘
|
3D打印是一种快速成型的增材制造技术。光固化立体印刷(SLA)是技术较成熟和应用较广的一种3D打印技术。SLA是采用紫外激光的单光子聚合过程,其加工分辨率受经典光学衍射极限的限制,难以满足分辨率高的微纳结构的加工。不同于SLA,利用近红外波长飞秒激光的双光子聚合3D打印技术可以突破经典光学衍射的限制,制造分辨率高的纳米尺度任意形状三维结构。本文将介绍双光子吸收和双光子聚合的原理、双光子聚合的发展和双光子聚合3D打印技术的应用,最后对该技术的发展进行展望。 |
|
其他语种文摘
|
3D printing is a rapid prototyping technology based on an additive process. Stereolithography (SLA) as a mature 3D printing technology has been widely applied in industrial manufacture. SLA is the process of single-photon polymerization (SPP), and its resolution is controlled by the optical diffraction limit, which cannot meet the requirement for three dimensional micro/nanostructures with high resolution. Unlike SLA, 3D printing technology based on two-photon polymerization (TPP) induced by a near-infrared femtosecond laser can fabricate arbitrary and ultraprecise 3D microstructures with high resolution not only on the microscopic scale but also on the nanoscale. In this review, the principles of two-photon absorption and TPP were concisely explained. The development of TPP mainly focusing on TPP resolution and TPP initiators were introduced as well as the applications of 3D printing technology based on TPP. Finally, the perspective of 3D printing technology based on TPP was proposed. |
|
来源
|
化工学报
,2015,66(9):3324-3332 【核心库】
|
|
DOI
|
10.11949/j.issn.0438-1157.20150754
|
|
关键词
|
制造
;
纳米技术
;
聚合
;
3D打印
;
双光子
|
|
地址
|
1.
天津工业大学材料学院, 天津, 300387
2.
天津大学化工学院, 天津, 300072
|
|
语种
|
中文 |
|
文献类型
|
综述型 |
|
ISSN
|
0438-1157 |
|
学科
|
一般工业技术 |
|
基金
|
国家自然科学基金项目
|
|
文献收藏号
|
CSCD:5511899
|
参考文献 共
45
共3页
|
|
1.
Murphy S V. 3D bioprinting of tissues and organs.
Nat. Biotechnol,2014,32(8):773-785
|
被引
187
次
|
|
|
|
|
2.
Campbell T A. 3D printing of multifunctional nanocomposites.
Nano Today,2013,8(2):119-120
|
被引
10
次
|
|
|
|
|
3.
Fischer J. Three-dimensional optical laser lithography beyond the diffraction limit.
Laser. Photonics. Rev,2013,7(1):22-44
|
被引
36
次
|
|
|
|
|
4.
Torgersen J. Hydrogels for two-photon polymerization: a toolbox for mimicking the extracellular matrix.
Adv. Funct. Mater,2013,23(36):4542-4554
|
被引
7
次
|
|
|
|
|
5.
Zeng H. High-resolution 3D direct laser writing for liquid-crystalline elastomer microstructures.
Adv. Mater,2014,26(15):2319-2322
|
被引
10
次
|
|
|
|
|
6.
Goppert-Mayer M. Uber elementarakte mit zwei quantensprungen.
Ann. Physik,1931,9(1):273-294
|
被引
41
次
|
|
|
|
|
7.
Kaiser W. Two-photon excitation in CaF_2: Eu~(2+).
Phys. Rev. Lett,1961,7(6):229-231
|
被引
61
次
|
|
|
|
|
8.
Rumi M. Two-photon absorption: an overview of measurements and principles.
Adv. Opt. Photon,2010,2(4):451-518
|
被引
8
次
|
|
|
|
|
9.
Pawlicki M. Two-photon absorption and the design of two-photon dyes.
Angew. Chem. Int. Ed,2009,48(18):3244-3266
|
被引
50
次
|
|
|
|
|
10.
王涛. 双光子光聚合技术及其研究进展.
感光科学与光化学,2003,21(3):223-230
|
被引
3
次
|
|
|
|
|
11.
董贤子. Fabrication and application of two-photon femtosecond laser micro/nano technology.
科学通报,2008,53(1):2-13
|
被引
10
次
|
|
|
|
|
12.
Zhang Y L. Designable 3D nanofabrication by femtosecond laser direct writing.
Nano Today,2010,5(5):435-448
|
被引
60
次
|
|
|
|
|
13.
Farsari M. Two-photon fabrication.
Nature. Photon,2009,3(8):450-452
|
被引
10
次
|
|
|
|
|
14.
Xing J F. A water soluble initiator prepared through host-guest chemical interaction for microfabrication of 3D hydrogels via two-photon polymerization.
J. Mater. Chem. B,2014,2(27):4318-4324
|
被引
4
次
|
|
|
|
|
15.
Maruo S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization.
Opt. Lett,1997,22(2):132-134
|
被引
69
次
|
|
|
|
|
16.
Kawata S. Finer features for functional microdevices.
Nature,2001,412(6848):697-698
|
被引
191
次
|
|
|
|
|
17.
Xing J F. Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency.
Appl. Phys. Lett,2007,90(13):130016
|
被引
1
次
|
|
|
|
|
18.
Takada K. Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting.
Appl. Phys. Lett,2005,86(7):071122
|
被引
12
次
|
|
|
|
|
19.
Dong X Z. Improving spatial resolution and reducing aspect ratio in multiphoton polymerization nanofabrication.
Appl. Phys. Lett,2008,92(2):091113
|
被引
17
次
|
|
|
|
|
20.
Tan D F. Reduction in feature size of two-photon polymerization using SCR500.
Appl. Phys. Lett,2007,90(7):71106
|
被引
2
次
|
|
|
|
|
了解气象卫星更多信息，请访问