帮助 关于我们

返回检索结果

Multi-objective optimization of crimping of large-diameter welding pipe

查看参考文献20篇

Fan Lifeng 1 *   Gao Ying 2   Yun Jianbin 3   Li Zhipeng 4  
文摘 Crimping is widely adopted in the production of large-diameter submerged-arc welding pipes. Traditionally, designers obtain the technical parameters for crimping from experience or by trial and error through experiments and the finite element(FE) method. However, it is difficult to achieve ideal crimping quality by these approaches. To resolve this issue, crimping parameter design was investigated by multi-objective optimization. Crimping was simulated using the FE code ABAQUS and the FE model was validated experimentally. A welding pipe made of X80 high-strength pipeline steel was considered as a target object and the optimization problem for its crimping was formulated as a mathematical model and crimping was optimized. A response surface method based on the radial basis function was used to construct a surrogate model; the genetic algorithm NSGA-II was adopted to search for Pareto solutions; grey relational analysis was used to determine the most satisfactory solution from the Pareto solutions. The obtained optimal design of parameters shows good agreement with the initial design and remarkably improves the crimping quality. Thus, the results provide an effective approach for improving crimping quality and reducing design times.
来源 Journal of Central South University ,2015,22(7):2540-2548 【核心库】
DOI 10.1007/s11771-015-2783-4
关键词 crimping ; welding pipe ; optimization ; grey system theory ; genetic algorithm
地址

1. Transportation Institute, Inner Mongolia University, Hohhot, 010070  

2. College of Material Science and Engineering, Hebei University of Science and Technology, Shijiazhuang, 050018  

3. Product Quality Inspection Institute of Inner Mongolia, Hohhot, 010070  

4. Institute of Aircraft Design, Shenyang, 110035

语种 英文
文献类型 研究性论文
ISSN 2095-2899
学科 数学
基金 supported by the Natural Science Foundation of Hebei Provincial Education Department, China ;  supported by the Natural Science Foundation of Hebei Provincial Technology Department, China ;  supported by the Inner Mongolia Higher School Science and Technology Research Program, China ;  supported by the Natural Science Foundation of Inner Mongolia, China ;  supported by the Program of Higher-level Talents Fund of Inner Mongolia University, China
文献收藏号 CSCD:5501707

参考文献 共 20 共1页

1.  Li Hong. Prebending process of longitudinal submerged arc welding production line. Welded Pipe Tube, (in Chinese),2006,29(1):55-57 被引 1    
2.  Xie Zhiming. Pre-bending process parameter design of longitudinal submerged arc welding pipe. Welded Pipe Tube, (in Chinese),2007,30(3):52-54 被引 1    
3.  Zhao Shiyan. Study on quality control strategy and simulation system development of UOE pipe forming, (in Chinese),2010 被引 1    
4.  Yang Qiang. Springback analytic and process parameters optimization of plate edge preflex for the forming of large diameter longitudinal seam welded pipe, (in Chinese),2012 被引 1    
5.  Fan Lifeng. Quality Control on Crimping of Large Diameter Welding Pipe. Chinese Journal of Mechanical Engineering,2012,25(6):1264-1273 被引 4    
6.  Palumbo G. Effect of forming and calibration operations on the final shape of large diameter welded tubes. Journal of Materials Processing Technology,2005,164/165(5):1089-1098 被引 10    
7.  Liu Jinlei. Effects of the parameters of prebending on O-forming of pipe in UOE process. Journal of Plasticity Engineering, (in Chinese),2005,12(3):72-75 被引 2    
8.  Herynk M D. Effects of the UOE/UOC pipe manufacturing processes on pipe collapse pressure. International Journal of Mechanical Sciences,49(5):533-553 被引 10    
9.  Tong Xiaogang. Study on groove shape and the open angle of end tab of UOE pipe, (in Chinese),2008 被引 1    
10.  Gao Ying. Finite element analysis of JCO forming process for longitudinal seam submerged arc welded pipes. Journal of Modelling, Identification and Control,2010,11(3/4):239-249 被引 3    
11.  Ren Qiang. The simulation of UOE pipe forming by three-dimensional finite element method. Journal of Netshape Forming Engineering, (in Chinese),2011,3(6):80-84 被引 1    
12.  Ohata T. Development of optimum process design system by numerical simulation. Journal of Materials Processing Technology,1996,60(1/2/3/4):543-548 被引 9    
13.  Naceur H. Optimization of drawbead restraining forces and drawbead design in sheet metal forming process. International Journal of Mechanical Sciences,2001,43(10):2407-2434 被引 33    
14.  Azaouzi M. An heuristic optimization algorithm for the blank shape design of high precision metallic parts obtained by a particular stamping process. Finite Elements in Analysis & Design,2008,44(14):842-850 被引 1    
15.  Guo Y Q. Recent developments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach. Computers and Structures,2000,78:138-148 被引 1    
16.  Yusoff Y. Overview of NSGA-II for optimizing machining process parameters. Procedia Engineering,2011,15:3978-3983 被引 8    
17.  Yang Yanzi. Optimization of technologic parameters of mechanical expanding based on neuro network and robust design, (in Chinese),2011 被引 1    
18.  Xie Yanmin. Application of the grey theory in stamping robust design. Journal of Shanghai JiaoTong University,2007,41(4):596-599 被引 1    
19.  Nevzat A. Multi-objective optimization of some process parameters of a lab-scale thickener using grey relational analysis. Separation and Purification Technology,2012,90:189-195 被引 6    
20.  Chen Yibao. A grey difference based multi-objective optimization strategy. Chinese Journal of Mechanical Engineering, (in Chinese),2003,39(1):101-106 被引 1    
引证文献 1

1 Fan Lifeng Research on deformation characteristics of JCOE forming in large diameter welding pipe Advances in Manufacturing,2016,4(3):268-277
被引 2

显示所有1篇文献

论文科学数据集
PlumX Metrics
相关文献

 作者相关
 关键词相关
 参考文献相关

版权所有 ©2008 中国科学院文献情报中心 制作维护:中国科学院文献情报中心
地址:北京中关村北四环西路33号 邮政编码:100190 联系电话:(010)82627496 E-mail:cscd@mail.las.ac.cn 京ICP备05002861号-4 | 京公网安备11010802043238号